Maria Cristina Gamberini

Solid-state study of polymorphic drugs : carbamazepine

Polymorphs of a compound have solid crystalline phases with different internal crystal lattices; in pharmaceuticals, differences due to polymorphism and pseudopolymorphism can affect bioavailability and effective clinical use. The aim of this work was to obtain the different polymorphic modifications of the anticonvulsant drug, carbamazepine, and to characterise them by means of typical structure-sensitive analytical techniques, such as FT-IR spectroscopy, XRPD and DSC. Further investigations were also performed by Hot Stage FT-IR thermomicroscopy, which permitted the visible and spectroscopic characterisation of the polymorphic forms during heating. Our results confirm the existence of three different polymorphic forms for anhydrous carbamazepine: Form III, the commercial one, Form I, obtained by heating Form III and Form II, crystallised from ethanolic solution. Substantial differences were detected among the polymorphs with regard to solid-state properties. Moreover, Hot Stage FT-IR thermomicroscopy proved its analytical potential to characterise the drugs polymorphism.

Study of flavonoids/β-cyclodextrins inclusion complexes by NMR, FT-IR, DSC, X-ray investigation☆

Flavonoids are natural substances with a lot of biological activities, including the antioxidant one. Their use in pharmaceutical field is, however, limited by their aqueous insolubility. As the formation of the inclusion complexes can improve their solubility in water, the flavonoids hesperetin, hesperidin, naringenin and naringin have been complexed with beta-cyclodextrin (beta-CD) by the coprecipitation method and studied in solution and in solid state by NMR, FT-IR, differential scanning calorimetry and X-ray techniques. The effects of complexation on the chemical shifts of the internal and external protons of beta-CD in the presence of each flavonoid were observed.

Pharmacological approaches to the treatment of diabetic complications

Diabetes is often accompanied by several long-term complications such as neuropathy, nephropathy, retinopathy, cataract and angiopathy; their occurrence has been linked to the modification of the physiological levels of glycaemia. Several interrelated metabolic pathways have been implicated in the toxic effects of glucose; the polyol pathway was one of the first considered. However, while in diabetic animal models the inhibitors of aldose reductase (ALR2, the first enzyme of this pathway) seem to be active, 16 years of clinical trials, based mainly on neuropathy, have been inconclusive; only one drug currently being marketed. Newer potent and selective aldose reductase inhibitors have been discovered in the last few years, but the lack of commercial success has probably led to the very rapid decrease in the number of patents relating to newer aldose reductase inhibitors. Inhibition of the second enzyme of this pathway, sorbitol dehydrogenase (SDH), has been shown to be detrimental. Other approaches for the prevention and the delay of progression of diabetic complications seem to be more promising, namely, the inhibition of the formation of advanced glycated end products (AGEs) or protein kinase C (PKC) β2 inhibition; compounds acting on these two pathways have proved effective in retarding the development of diabetic complications in animal models and some products are in clinical trials at the moment. Renewed attention has been paid to vascular involvement in the pathogenesis of diabetic neuropathy; the biological activity of C-peptide and the role of endothelin-1 (ET-1) in diabetic vascular disease are emerging as a new research area for the treatment of diabetic complications.

Study of β-blockers/β-cyclodextrins inclusion complex by NMR, DSC, X-ray and SEM investigation ☆

Abstract The formation of inclusion complexes between β-cyclodextrin with the two β-blockers, atenolol and celiprolol, have been studied in the aqueous environment and in the solid state by nuclear magnetic resonance (NMR) spectroscopy, X-ray, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) techniques. The magnitude of the chemical shifts of the interior and exterior β-cyclodextrin protons in the presence of each β-blocker indicated that these are included within the β-cyclodextrin cavity. In aqueous solution they form 1:1 complexes. In the solid state the formation of the β-cyclodextrin/atenolol (celiprolol) complexes is confirmed by X-ray, DSC and SEM, also employed to characterize pure substances and their physical mixtures.

Discovery of new inhibitors of aldose reductase from molecular docking and database screening.

Aldose reductase (ALR2) is a target enzyme for the treatment of diabetic complications. Owing to the limited number of currently available drugs for the treatment of diabetic complications, the discovery of new inhibitors of ALR2 that can potentially be optimized as drugs appears highly desirable. In this study, a molecular docking analysis of the structures of more than 127,000 organic compounds contained in the National Cancer Institute database was performed to find and score molecules that are complementary to ALR2. Besides retrieving several carboxylic acid derivatives, which are known to generally inhibit aldose reductase, docking proposed other families of putative inhibitors such as sulfonic acids, nitro-derivatives, sulfonamides and carbonyl derivatives. Twenty-five compounds, chosen as the highest-scoring representatives of each of these families, were tested as aldose reductase inhibitors. Five of them were found to inhibit aldose reductase in the micromolar range. For these active compounds, selectivity with respect to the closely-related aldehyde reductase was determined by measuring the corresponding inhibitory activities. The structures of the complexes between the new lead inhibitors and aldose reductase, here refined with molecular mechanics and molecular dynamics calculations, suggest that new pharmacophoric groups can bind aldose reductase very efficiently. In the case of the family of the nitro-derivative inhibitors, a class of particularly interesting compounds, a round of optimizations was performed with the synthesis and biological evaluation of a series of derivatives aimed at testing the proposed binding mode and at improving interaction with active site residues. Starting from a hit compound having an IC(50) of 42 microM, the most potent compound synthesized showed a 10-fold increase in inhibitory activity and 10-fold selectivity with respect to ALR1, and structure--activity relationships of the designed compounds were in agreement with the proposed mode of binding at the active site.

Chemico-physical investigation of tenofovir loaded polymeric nanoparticles.

Tenofovir (PMPA), an acyclic nucleoside phosphonate analog, is one of the most important drugs used for the HIV treatment. Unfortunately, several adverse reactions are related to its i.v. administration owing to the saturation of an anionic renal transporter. In order to improve the drug administration, the PMPA was embedded into a new type of nanocarriers based on poly-(D,L-lactide-co-glycolide) (PLGA) and/or chitosan (CH). The strategies for the preparation of nanoparticles (Nps) with a more efficient drug loading respect to the one reported in the literature for PMPA nanoencapsulation were investigated. CH was added in the first inner emulsion or in the external phase during the second emulsion of water/oil/water (W/O/W) Nps. The addition of CH in the first inner emulsion was the most promising technique. The Nps have a Z-average of 230 nm, a Z-potential of -3 mV and an EE% of 15 that was 2.5-3 times higher than that obtained with PLGA Nps or CH Nps. In vitro release studies showed a limited control on drug release in phosphate buffer (pH 7.4) while an initial burst effect followed by a slow drug release was observed in acidic receiving phase (pH 4.6). These results suggest the PLGA/CH Nps should be an effective and attractive anti-HIV drug carrier to study the cellular uptake and drug delivery on target cells such as macrophages.

Characterization of polymorphic ampicillin forms

In this work polymorphs of α-aminobenzylpenicillin (ampicillin), a β-lactamic antibiotic, were prepared and investigated by several experimental and theoretical methods. Amorphous monohydrate and three crystalline forms, the trihydrate, the crystal form I and the crystal form II, were investigated by FT-IR and micro-Raman. Also data obtained by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray powder diffraction (XRPD) and hot-stage Raman spectroscopy are reported. Finally, quantum mechanical calculations were performed by density functional theory (DFT) to assist the assignment of spectroscopic experimental bands. For the first time, the ampicillin molecule in its zwitterionic form was studied at the B3LYP/aug-cc-pVDZ level and the corresponding theoretical vibrational spectra were computed. In fact, ampicillin in the crystal is in zwitterionic form and concentrations of this same form are quite relevant in solutions at physiological pH. Experimental and theoretical results allowed identification of specific features for polymorph characterization. Bands typical of the different polymorphs are identified both in IR and Raman spectra: in particular in the NH stretching region (IR), in the amide I+δNH region (both techniques), in the 1520-1490cm(-1) region (IR), in the 1320-1300cm(-1) and 1280-1220cm(-1) (IR), in the 1200-1170cm(-1) (Raman), in the amide V region (IR), and, finally, in the 715-640cm(-1) and 220-200cm(-1) (Raman). Interconversion among different polymorphs was investigated by hot-stage Raman spectroscopy and thermal analysis, clarifying the complex pattern of transformations undergone as a function of temperature and heating rate. In particular, DSC scans show how the trihydrate crystals transform into anhydrous forms on heating. Finally, stability tests demonstrated, after a two years period, that no transformation or degradation of the polymorphs occurred.

Characterization of fresh and aged natural ingredients used in historical ointments by molecular spectroscopic techniques: IR, Raman and fluorescence

Natural organic materials used to prepare pharmaceutical mixtures including ointments and balsams have been characterized by a combined non-destructive spectroscopic analytical approach. Three classes of materials which include vegetable oils (olive, almond and palm tree), gums (Arabic and Tragacanth) and beeswax are considered in this study according to their widespread use reported in ancient recipes. Micro-FTIR, micro-Raman and fluorescence spectroscopies have been applied to fresh and mildly thermally aged samples. Vibrational characterization of these organic compounds is reported together with tabulated frequencies, highlighting all spectral features and changes in spectra which occur following artificial aging. Synchronous fluorescence spectroscopy has been shown to be particularly useful for the assessment of changes in oils after aging; spectral difference between Tragacanth and Arabic gum could be due to variations in origin and processing of raw materials. Analysis of these materials using non-destructive spectroscopic techniques provided important analytical information which could be used to guide further study.

Nitrophenyl derivatives as aldose reductase inhibitors

Nitrophenyl derivatives were recently discovered as a new class of ALR2 inhibitors by means of docking and database screening of the National Cancer Institute database of organic molecules. The nitro group was predicted to bind to the Tyr48 and His110 active site residues of the enzyme, the site where acidic ALR2 inhibitors such as carboxylic acids bind in their anionic form. Given the novelty of these compounds, we decided to expand their structure-activity relationships by synthesizing and testing a series of derivatives and the corresponding compounds having a carboxylic group instead of the nitro moiety; the results obtained were rationalized by means of docking and molecular dynamics simulations. On the whole there is an agreement between inhibitory data and the results of molecular modeling experiments, supporting the hypothesized binding mode of these compounds.

A multi-analytical approach for the characterization of powders from the Pompeii archaeological site.

AbstractNine black powders found in Pompeii houses in three different types of bronze vessels (cylindrical theca atramentaria, unguentaries, and aryballoi) were characterized in order to assess a correspondence between the composition and the type of vessel and, possibly, to verify if these powders were inks or not. For the compositional characterization, a multi-analytical approach was adopted, which involved the use of scanning electron microscopy–energy dispersive X-ray, Fourier-transformed infrared spectroscopy, Raman, X-ray diffraction, electron paramagnetic resonance spectroscopy, thermogravimetric analysis, gas chromatography coupled with mass spectrometry (GC/MS), and pyrolysis GC/MS. Powders contained in cylindrical theca atramentaria form a homogeneous group, and their organic and inorganic compositions suggest that they were writing inks, while powders contained in unguentaries and aryballoi could have had several different uses, including writing inks and cosmetics. Furthermore, the composition profile of the powders found in cylindrical cases shows that, at 79 ad, in Pompeii, carbon-based inks were still used for writing, and iron gall inks had not been introduced yet. FigurePhotography of the 12724 black powder contained in a cylindrical theca atramentaria.