Maria E. de Mesquita

Theoretical and Experimental Studies of the Photoluminescent Properties of the Coordination Polymer [Eu(DPA)(HDPA)(H2O)2]·4H2O

We report on the hydrothermal synthesis of the [Eu(DPA)(HDPA)(H(2)O)(2)].4H(2)O lanthanide-organic framework (where H2DPA stands for pyridine-2,6-dicarboxylic acid), its full structural characterization including single-crystal X-ray diffraction and vibrational spectroscopy studies, plus detailed investigations on the experimental and predicted (using the Sparkle/PM3 model) photophysical luminescent properties. We demonstrate that the Sparkle/PM3 model arises as a valid and efficient alternative to the simulation and prediction of the photoluminescent properties of lanthanide-organic frameworks when compared with methods traditionally used. Crystallographic investigations showed that the material is composed of neutral one-dimensional coordination polymers infinity(1)[Eu(DPA)(HDPA)(H(2)O)(2)] which are interconnected via a series of hydrogen bonding interactions involving the water molecules (both coordinated and located in the interstitial spaces of the structure). In particular, connections between bilayer arrangements of infinity(1)[Eu(DPA)(HDPA)(H(2)O)(2)] are assured by a centrosymmetric hexameric water cluster. The presence of this large number of O-H oscillators intensifies the vibronic coupling with water molecules and, as a consequence, increases the number of nonradiative decay pathways controlling the relaxation process, ultimately considerably reducing the quantum efficiency (eta = 12.7%). The intensity parameters (Omega(2), Omega(4), and Omega(6)) were first calculated by using both the X-ray and the Sparkle/PM3 structures and were then used to calculate the rates of energy transfer (W(ET)) and back-transfer (W(BT)). Intensity parameters were used to predict the radiative decay rate. The calculated quantum yield obtained from the X-ray and Sparkle/PM3 structures (both of about 12.5%) are in good agreement with the experimental value (12.0 +/- 5%). These results clearly attest for the efficacy of the theoretical models employed in all calculations and create open new interesting possibilities for the design in silico of novel and highly efficient lanthanide-organic frameworks.

Potential of a metal-organic framework as a new material for solid-phase extraction of pesticides from lettuce (Lactuca sativa), with analysis by gas chromatography-mass spectrometry.

The metal-organic framework (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] was tested for extraction of pyrimicarb, procymidone, malathion, methyl parathion and α- and β-endosulfan from lettuce, with analysis using GC/MS in SIM mode. Experiments were carried out in triplicate at two fortification levels (0.1 and 0.5 mg/kg), and resulted in recoveries in the range of 78-107%, with RSD values between 1.6 and 8.0% for (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] sorbent. Detection and quantification limits ranged from 0.02 to 0.05 mg/kg and from 0.05 to 0.10 mg/kg, respectively, for the different pesticides studied. The method developed was linear over the range tested (0.05-10.0 μg/mL), with correlation coefficients ranging from 0.9990 to 0.9997. Comparison between (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] and conventional sorbent (silica gel) showed better performance of the (∞)[(La(0.9)Eu(0.1))(2)(DPA)(3)(H(2)O)(3)] polymeric sorbent for all pesticides tested.

Theoretical and Experimental Spectroscopic Approach of Fluorinated Ln3+−β-Diketonate Complexes

In this paper we report the synthesis of two new complexes, [Eu(fod)(3)(phen)] and [Tb(fod)(3)(phen)] (fod = 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octadionate and phen = 1,10-phenanthroline), and their complete characterization, including single-crystal X-ray diffraction, UV-vis spectroscopy, IR spectroscopy, and TGA. The complexes were studied in detail via both theoretical and experimental approaches to the photophysical properties. The [Eu(fod)(3)(phen)] complex crystallizes in the monoclinic space group P2(1)/c. The crystal structure of [Eu(fod)(3)(phen)] exhibits an offset pi-pi stacking interaction between the phenanthroline ligands of adjacent lanthanide complexes. The Eu(3+) cation is coordinated to three fod anionic ligands and to one phen. The symmetry around Eu(3+) is best described as a highly distorted square antiprism. The molar absorption coefficients of [Eu(fod)(3)(phen)] and [Tb(fod)(3)(phen)] revealed an improved ability to absorb light in comparison with the stand-alone phen and fod molecules. [Tb(fod)(3)(phen)] emits weak UV excitation, with this feature being explained by the triplet-(5)D(4) resonance, which contributes significantly to the nonradiative deactivation of Tb(3+), causing a short lifetime and low quantum yield. The intensity parameters (Omega(2), Omega(4), and Omega(6)) of [Eu(fod)(3)(phen)] were calculated for the X-ray and Sparkle/AM1 structures and compared with values obtained for [Eu(fod)(3)(H(2)O)(2)] and [Eu(fod)(3)(phen-N-O)] (phen-N-O = 1,10-phenanthroline N-oxide) samples. Intensity parameters were used to predict the radiative decay rate. The theoretical quantum efficiencies from the X-ray and Sparkle/AM1 structures are in good agreement with the experimental values, clearly attesting to the efficacy of the theoretical models.

Two-dimensional coordination polymer matrix for solid-phase extraction of pesticide residues from plant Cordia salicifolia

The 2D coordination polymer (infinity[Gd(DPA)(HDPA)]) was tested for extraction of acephate, chlorpropham, pirimicarb, bifenthrin, tetradifon, and phosalone from the medicinal plant Cordia salicifolia, whose extracts are commercialized in Brazil as diuretic, appetite suppressant, and weight loss products, using GC/MS, SIM. Considering that there are no Brazilian regulations concerning maximum permissible pesticide residue concentrations in medicinal herbs, recovery experiments were carried out (seven replicates), at two arbitrary fortification levels (0.5 and 1.0 mg/kg), resulting in recoveries in range of 20 to 107.7% and SDRSDs were between 5.6 and 29.1% for infinity[Gd(DPA)(HDPA)] sorbent. Detection and quantification limits for herb ranged from 0.10 to 0.15 mg/kg and from 0.15 to 0.25 mg/kg, respectively, for the different pesticides studied. The developed method is linear over the range assayed, 0.5-10.0 microg/mL, with correlation coefficients ranging from 0.9975 to 0.9986 for all pesticides. Comparison between infinity[Gd(DPA)(HDPA)] sorbent and conventional sorbent (neutral alumina) showed similar performance of infinity[Gd(DPA)(HDPA)] polymeric sorbent for three (bifenthrin, tetradifon, and phosalone) out of six pesticides tested.

A new functionalized MCM-41 mesoporous material for use in environmental applications

Este trabalho descreve a sintese e caracterizacao de um novo adsorvente mesoporoso que consiste o MCM-41 funcionalizado com o acido p-aminobenzoico modificado (PABA-Si). A sintese foi realizada pelo metodo hidrotermal/co-condensacao. O PABA-MCM-41 foi caracterizado usando FTIR, SAXS, adsorcao/desorcao de N2, MEV e TG. Os experimentos em batelada foram utilizados para determinar os efeitos da concentracao inicial do adsorbato, tempo de contato e temperatura. A adsorcao do benzo[a]pireno (B[a]P) alcancou o equilibrio depois de 90 min (qe = 27,2 µg g-1) e concentracoes mais altas do adsorbato foram associadas com o aumento, em ambos, da percentagem de remocao (71,0-95,7%) e no valor de qe (20,1-27,1 µg g-1). A adsorcao seguiu o modelo cinetico de pseudo-segunda ordem, e se ajustou ao modelo de isoterma de Langmuir. Foi verificado em temperaturas mais altas um aumento na taxa inicial de adsorcao e na constante cinetica. Os parâmetros termodinâmicos indicaram que o processo foi espontâneo, endotermico e com uma tendencia para desordem.

Spectroscopic studies of the Eu(III) and Gd(III) tris(3-aminopyridine-2-carboxylic acid) complexes

Abstract The synthesis and spectroscopic studies of the complexes of Eu(III) and Gd(III) with 3-aminopyridine-2-carboxylic acid (3-NH 2 pic) are described. An experimental and theoretical analysis of the intensities of the 5 D 0 → 7 F 0,1,2,4 transitions of the Eu(III) ion is presented. An approximate structure for the Eu(III) complex is assumed and the theoretical calculations are based on a model, previously described, which takes into account the forced electric dipole and dynamic coupling mechanisms.

Estudos espectroscópicos e estruturais dos polímeros de coordenação 2D, ∞[Tb(DPA)(HDPA)] e ∞[Gd(DPA)(HDPA)]

This paper presents the synthesis of the coordination polymers ∞[Ln(DPA)(HDPA)] (DPA=2,6-pyridinedicarboxylate; Ln= Tb and Gd), their structural and spectroscopic properties. The structural study reveals that the ∞[Ln(DPA)(HDPA)] has a single Ln+3 ion coordinated with two H2DPA ligands in tridentade coordination mode, while two others H2DPA establish a syn-bridge with a symmetry-related Ln3+, forming a two-dimensional structure. The spectroscopic studies show that ∞[Tb(DPA)(HDPA)] compound has high quantum yield (qx≈ 50.0%), due to the large contribution of radiative decay rate. Moreover triplet level is localized sufficiently over the emitter level 5D4 of theTb3+ ion, avoiding a retrotransference process between these states.

Synthesis of LaNiO3 perovskite by the modified proteic gel method and study of catalytic properties in the syngas production

This work describes a study on the synthesis of LaNiO3 perovskites via the modified proteic gel method, varying collagen content and on the catalytic activity of LaNiO3 and LaNiO3/Al2O3 in the syngas (CO + H2) production. X-ray diffraction patterns revealed the formation of perovskite structure in all samples prepared by proteic gel synthesis method, varying collagen content and after calcinations at 700 oC for 2 h. LaNiO3/Al2O3 catalyst prepared by the impregnation method showed diffraction peaks due to the perovskite structure and to the support (Al2O3). This catalyst presented: specific surface of 46.1 m2 g-1, two reduction peaks in the temperature programmed reduction (TPR) profile and 46% of methane conversion (by the partial oxidation of methane using oxygen) after 18 h of reaction.

Síntese da perovsquita do tipo LaNiO3 através do método dos precursores quelantes usando EDTA: otimização do teor de agente quelante

The perovskites are strategic materials due their catalytic, electronic and magnetic properties. These properties are influenced by the calcination and synthesis conditions. In this work was carried out the synthesis of LaNiO3 perovskite-type by chelating precursor method using EDTA and also was studied the optimization of the EDTA content in the synthesis. The synthesized materials were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TG) and Infrared Spectroscopy (FTIR). In the optimization of the EDTA content the lowest ratio of metal / EDTA used was 1.0 / 0.1, where it was possible to obtain monophasic perovskite.