Maria Forsyth

Energy applications of ionic liquids

Ionic liquids offer a unique suite of properties that make them important candidates for a number of energy related applications. Cation–anion combinations that exhibit low volatility coupled with high electrochemical and thermal stability, as well as ionic conductivity, create the possibility of designing ideal electrolytes for batteries, super-capacitors, actuators, dye sensitised solar cells and thermo-electrochemical cells. In the field of water splitting to produce hydrogen they have been used to synthesize some of the best performing water oxidation catalysts and some members of the protic ionic liquid family co-catalyse an unusual, very high energy efficiency water oxidation process. As fuel cell electrolytes, the high proton conductivity of some of the protic ionic liquid family offers the potential of fuel cells operating in the optimum temperature region above 100 °C. Beyond electrochemical applications, the low vapour pressure of these liquids, along with their ability to offer tuneable functionality, also makes them ideal as CO2 absorbents for post-combustion CO2 capture. Similarly, the tuneable phase properties of the many members of this large family of salts are also allowing the creation of phase-change thermal energy storage materials having melting points tuned to the application. This perspective article provides an overview of these developing energy related applications of ionic liquids and offers some thoughts on the emerging challenges and opportunities.

Lithium-doped plastic crystal electrolytes exhibiting fast ion conduction for secondary batteries

Rechargeable lithium batteries have long been considered an attractive alternative power source for a wide variety of applications. Safety and stability concerns associated with solvent-based electrolytes has necessitated the use of lithium intercalation materials (rather than lithium metal) as anodes, which decreases the energy storage capacity per unit mass. The use of solid lithium ion conductors—based on glasses, ceramics or polymers—as the electrolyte would potentially improve the stability of a lithium-metal anode while alleviating the safety concerns. Glasses and ceramics conduct via a fast ion mechanism, in which the lithium ions move within an essentially static framework. In contrast, the motion of ions in polymer systems is similar to that in solvent-based electrolytes—motion is mediated by the dynamics of the host polymer, thereby restricting the conductivity to relatively low values. Moreover, in the polymer systems, the motion of the lithium ions provides only a small fraction of the overall conductivity, which results in severe concentration gradients during cell operation, causing premature failure. Here we describe a class of materials, prepared by doping lithium ions into a plastic crystalline matrix, that exhibit fast lithium ion motion due to rotational disorder and the existence of vacancies in the lattice. The combination of possible structural variations of the plastic crystal matrix and conductivities as high as 2 × 10-4 S cm-1 at 60 °C make these materials very attractive for secondary battery applications.

High Rates of Oxygen Reduction over a Vapor Phase–Polymerized PEDOT Electrode

The air electrode, which reduces oxygen (O2), is a critical component in energy generation and storage applications such as fuel cells and metal/air batteries. The highest current densities are achieved with platinum (Pt), but in addition to its cost and scarcity, Pt particles in composite electrodes tend to be inactivated by contact with carbon monoxide (CO) or by agglomeration. We describe an air electrode based on a porous material coated with poly(3,4-ethylenedioxythiophene) (PEDOT), which acts as an O2 reduction catalyst. Continuous operation for 1500 hours was demonstrated without material degradation or deterioration in performance. O2 conversion rates were comparable with those of Pt-catalyzed electrodes of the same geometry, and the electrode was not sensitive to CO. Operation was demonstrated as an air electrode and as a dissolved O2 electrode in aqueous solution.

High conductivity molten salts based on the imide ion

The bis(trifluoromethanesulfonyl)imide ion has recently been used in its lithium salt as a useful ion in solid polymer electrolytes because of the reduced degree of ion interaction its diffuse charge generates. In this work we have synthesised a number of novel salts based on the ammonium and pyrrolidinium cations of this anion. The salts all show reduced melting points compared with analogous halide salts. In some cases they are molten at room temperature. This latter group of salts have been characterized with respect to their properties as ionic liquids; the highest room temperature conductivity 2 mS cm−1 being exhibited by methyl butyl pyrrolidinium imide. Many of the salts are glass forming, exhibiting glass transition temperatures in the region of −90°C.

Diffusion layer parameters influencing optimal fuel cell performance

The performance of polymer electrolyte fuel cells (PEFCs) is substantially influenced by the morphology of the gas diffusion layer. Cells utilising sintered gas diffusion layers made with a low pore volume Acetylene Black carbon, at an optimised thickness, showed better performance compared with cells containing Vulcan XC-72R carbon. The cells were optimised using both oxygen and air as oxidants showing that different conditions were required in each case to achieve optimum cell performance. A model, in which the hydrophobicity and porosity of the diffusion layer affect water impregnation and gas diffusion through the gas diffusion layer, is presented to explain the influence of the diffusion layer morphology on cell performance.

Platinum electrodeposition for polymer electrolyte membrane fuel cells

A novel electrodeposition technique for preparing the catalyst layer in polymer electrolyte membrane fuel cells has been designed, which may enable an increase in the level of platinum utilisation currently achieved in these systems. This method consists of a two-step procedure involving the impregnation of platinum ions into a preformed catalyst layer (via an ion-exchange into the Nafion polymer electrolyte), followed by a potentiostatic reduction. The concentration of Nafion within the catalyst layer was found to have a significant bearing on the size of the platinum deposits. The preparation of catalyst layers containing a desired platinum loading should also be possible using this method. Surface areas of the platinum deposits were determined using cyclic voltammetry. The prepared catalyst was compared with a conventional electrode made from E-TEK Pt/C. Scanning electron microscopy was used to investigate the dispersion of the platinum particles. Platinum loadings were determined quantitatively by atomic absorption spectroscopy.

Low viscosity ionic liquids based on organic salts of the dicyanamide anion

New families of salts viz. quaternary ammonium, N-alkyl-N-methylpyrrolidinium or 1-alkyl-3-methylimidazolium dicyanamides, Cat+N(CN)2−, are low melting compounds, most being liquid at rt, water-miscible and have low (for ionic liquids) viscosity at rt, e.g.η = 21 cP for 1-ethyl-3-methylimidazolium dicyanamide.

Electrochemistry at Negative Potentials in Bis(trifluoromethanesulfonyl)amide Ionic Liquids

The bis(trifluoromethanesulfonyl)amide (TFSA) anion is widely studied as an ionic liquid (IL) forming anion which imparts many useful properties, notably electrochemical stability. Here we present electrochemical and spectroscopic evidence indicating that reductive decomposition of the bis(trifluoromethanesulfonyl)amide (TFSA) anion begins at ~ −2.0 V vs. Fc+/Fc, well before the reported cathodic limit for many of these ILs. These processes are shown to be dependent upon the electrode substrate and are influenced by the water content of the IL. Supporting ab initio calculations are presented which suggest a possible mechanism for the anion decomposition. The products appear to passivate the electrode surface and the implications of this behaviour are discussed.

Ordering and stability in conducting polypyrrole

X-ray diffraction (XRD) was employed to characterize electrochemically synthesized polypyrrole (PPy) films with 1,5-naphthalene disulfonate (1,5-NDS) counterions treated with simple acid and base. Results show that the as-synthesized film is amorphous with short-range ordering in the polymer backbone. This ordering is soon lost after thermal ageing at 150°C for 60 days and there is evidence of counterion degradation. Base treatment of the PPy/1,5-NDS films has similar effects leading to a complete loss of ordering in the polymer backbone and dedoping of the polymer. Acid treatment at high temperatures increases the ordering of the polymer backbone and results in the development of a secondary interdopant peak confirming that ion exchange has occurred. Conductivity of the PPy was also increased substantially. The enhanced ordering was maintained even after thermal ageing. Room-temperature acid treatment also results in improved ordering of the polymer as well as the counterion but the increase in conductivity is only marginal and most of the ordering is soon lost after thermal ageing. Increase in ordering of the polymer structure seems to lead to better conductivity, although not necessarily improved thermal stability.

Ion diffusion in molten salt mixtures

The molten salts, 1-methyl,3-ethylimidazolium trifluoromethanesulfonate (triflate salt, MeEtImTf) and 1-methyl,3-ethylimidazolium bis(trifluoromethanesulfonimide) (imide salt, MeEtImNTf2) are colourless ionic liquids with conductivities of the order of 10−2 S cm−1 at room temperature. DSC measurements revealed subambient melting and glass transition temperatures. Analysis of the anion and cation diffusion coefficients suggested that the cation was the dominant charge carrier and that the motion was largely independent of the anion. Haven ratios (HRs) of 1 and 1.6 were determined for the imide and triflate salts, respectively, at 30°C (303 K). Values greater than one imply some degree of ionic association, suggesting that aggregation is present in the triflate salt. Mixing of the salts to form binary systems resulted in enhanced conductivities which deviated from a simple law of mixtures. Thermal analysis showed no evidence of a melting point with only a glass transition observed. Corresponding diffusion measurements for the binaries appeared to show a weighted average of the diffusion coefficients of the pure components. The increased conductivity can be attributed to an increase in the number of charge carriers as a result of decreased ion association in the binary.