Maria Goreti Ferreira Sales

Microcystin-LR detection in water by the Fabry–Pérot interferometer using an optical fibre coated with a sol–gel imprinted sensing membrane

Cyanobacteria deteriorate the water quality and are responsible for emerging outbreaks and epidemics causing harmful diseases in Humans and animals because of their toxins. Microcystin-LR (MCT) is one of the most relevant cyanotoxin, being the most widely studied hepatotoxin. For safety purposes, the World Health Organization recommends a maximum value of 1 μg L(-1) of MCT in drinking water. Therefore, there is a great demand for remote and real-time sensing techniques to detect and quantify MCT. In this work a Fabry-Pérot sensing probe based on an optical fibre tip coated with a MCT selective thin film is presented. The membranes were developed by imprinting MCT in a sol-gel matrix that was applied over the tip of the fibre by dip coating. The imprinting effect was obtained by curing the sol-gel membrane, prepared with (3-aminopropyl) trimethoxysilane (APTMS), diphenyl-dimethoxysilane (DPDMS), tetraethoxysilane (TEOS), in the presence of MCT. The imprinting effect was tested by preparing a similar membrane without template. In general, the fibre Fabry-Pérot with a Molecular Imprinted Polymer (MIP) sensor showed low thermal effect, thus avoiding the need of temperature control in field applications. It presented a linear response to MCT concentration within 0.3-1.4 μg L(-1) with a sensitivity of -12.4±0.7 nm L μg(-1). The corresponding Non-Imprinted Polymer (NIP) displayed linear behaviour for the same MCT concentration range, but with much less sensitivity, of -5.9±0.2 nm L μg(-1). The method shows excellent selectivity for MCT against other species co-existing with the analyte in environmental waters. It was successfully applied to the determination of MCT in contaminated samples. The main advantages of the proposed optical sensor include high sensitivity and specificity, low-cost, robustness, easy preparation and preservation.

Novel LTCC-potentiometric microfluidic device for biparametric analysis of organic compounds carrying plastic antibodies as ionophores: Application to sulfamethoxazole and trimethoprim

Monitoring organic environmental contaminants is of crucial importance to ensure public health. This requires simple, portable and robust devices to carry out on-site analysis. For this purpose, a low-temperature co-fired ceramics (LTCC) microfluidic potentiometric device (LTCC/μPOT) was developed for the first time for an organic compound: sulfamethoxazole (SMX). Sensory materials relied on newly designed plastic antibodies. Sol-gel, self-assembling monolayer and molecular-imprinting techniques were merged for this purpose. Silica beads were amine-modified and linked to SMX via glutaraldehyde modification. Condensation polymerization was conducted around SMX to fill the vacant spaces. SMX was removed after, leaving behind imprinted sites of complementary shape. The obtained particles were used as ionophores in plasticized PVC membranes. The most suitable membrane composition was selected in steady-state assays. Its suitability to flow analysis was verified in flow-injection studies with regular tubular electrodes. The LTCC/μPOT device integrated a bidimensional mixer, an embedded reference electrode based on Ag/AgCl and an Ag-based contact screen-printed under a micromachined cavity of 600 μm depth. The sensing membranes were deposited over this contact and acted as indicating electrodes. Under optimum conditions, the SMX sensor displayed slopes of about -58.7 mV/decade in a range from 12.7 to 250 μg/mL, providing a detection limit of 3.85 μg/mL and a sampling throughput of 36 samples/h with a reagent consumption of 3.3 mL per sample. The system was adjusted later to multiple analyte detection by including a second potentiometric cell on the LTCC/μPOT device. No additional reference electrode was required. This concept was applied to Trimethoprim (TMP), always administered concomitantly with sulphonamide drugs, and tested in fish-farming waters. The biparametric microanalyzer displayed Nernstian behaviour, with average slopes -54.7 (SMX) and +57.8 (TMP) mV/decade. To demonstrate the microanalyzer capabilities for real applications, it was successfully applied to single and simultaneous determination of SMX and TMP in aquaculture waters.

Sulfadiazine-selective determination in aquaculture environment: selective potentiometric transduction by neutral or charged ionophores.

Solid-contact sensors for the selective screening of sulfadiazine (SDZ) in aquaculture waters are reported. Sensor surfaces were made from PVC membranes doped with tetraphenylporphyrin-manganese(III) chloride, α-cyclodextrin, β-cyclodextrin, or γ-cyclodextrin ionophores that were dispersed in plasticizer. Some membranes also presented a positive or a negatively charged additive. Phorphyrin-based sensors relied on a charged carrier mechanism. They exhibited a near-Nernstian response with slopes of 52 mV decade(-1) and detection limits of 3.91×10(-5) mol L(-1). The addition of cationic lipophilic compounds to the membrane originated Nernstian behaviours, with slopes ranging 59.7-62.0 mV decade(-1) and wider linear ranges. Cyclodextrin-based sensors acted as neutral carriers. In general, sensors with positively charged additives showed an improved potentiometric performance when compared to those without additive. Some SDZ selective membranes displayed higher slopes and extended linear concentration ranges with an increasing amount of additive (always <100% ionophore). The sensors were independent from the pH of test solutions within 2-7. The sensors displayed fast response, always <15s. In general, a good discriminating ability was found in real sample environment. The sensors were successfully applied to the fast screening of SDZ in real waters samples from aquaculture fish farms. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in locus measurements of sulfadiazine or parent-drugs.

Cefuroxime selective electrodes for batch and FIA determinations in pharmaceutical preparations

Different cefuroxime selective electrodes, without internal reference solution and comprising PVC membranes, were constructed and evaluated. Membranes were prepared with cefuroxime tetraoctylammonium (A) or cefuroxime bis(triphenylphosphoranylidene)ammonium (B) as ion-exchanger, 2-nitrophenyl octyl ether (X) or bis(2-ethylhexyl)sebacate (Y) as plasticizing mediator solvent and 4-tert-otcylphenol (TOP) as additive. From the comparative evaluation of the described electrodes, membranes comprising 2-nitrophenyl octyl ether, cefuroxime tetraoctylammonium and 4-tert-otcylphenol presented better working characteristics. For these electrodes (type XA-TOP), with a lifetime > 5 months, a lower limit of linear range of 2.8 x 10(-4) M, a practical detection limit of 1.3 x 10(-4) M, a reproducibility of approximately +/-0.6 mV day(-1) and a slope of -50.4 mV decade(-1), under H3PO4/NaH2PO4 solutions (pH 3.5; I =0.1 M), were found. The presence of the additive on the membranes was of crucial importance for the electrodes good characteristics. Interference from sulphate, chloride, nitrate, iodide, cefaclor, cefadroxil, cefazolin and cephradine, on the electrodes behaviour was evaluated. Only a slight interference from nitrate and iodide was recorded, being type XA-TOP electrodes the most selective units. Electrodes with a tubular configuration prepared with type XA-TOP membranes, aiming flow injection analysis, were also constructed. When these tubular potentiometric detectors were evaluated in a double-channel flow injection manifold, with 3.5 pH and 0.1 M ionic strength conditions, significantly better working characteristics than those of the corresponding conventional electrodes, namely higher slopes (-54.6 mV decade(-1)) and better reproducibilities (+/-0.2 mV day(-1)), were found. Both conventional and tubular type XA-TOP electrodes were used for injections analyses by batch and FIA, respectively, presenting low consumption of samples and reagents. Relative error deviations to the reference procedures <3.0% were found.

Construction and evaluation of PVC conventional and tubular tripelennamine-selective electrodes: their application in pharmaceutical preparations.

The construction and evaluation of tripelennamine conventionally-shaped ion-selective electrodes and tubular detectors for the determination of this compound in pharmaceutical formulations are described. Electrodes with conventional configuration have been constructed without an internal reference solution, using several types of immobilized ionic sensors in PVC. The different electrode membranes were prepared by using tripelennamine tetraphenylborate as ionic-exchanger, dissolved in 2-nitrophenyl octyl ether (type A), dibutylphthalate (type B) and bis-(2-ethylhexyl)sebacate (type C) as plasticizer solvents. The general working characteristics of the different types of conventional electrodes were evaluated in tripelennamine solutions, with adjusted ionic strength, showing a linear response in the concentration range of about 4 x 10(-5) - 1 x 10(-1) M and a slope near the theoretical value. The electrodes presented a fast response (> 20 s) and a high reproducibility (> or = 0.2 mV per day). The electrode selectivity in the presence of some interferents, such as sodium, potassium, lithium, ammonium, chlorpheniramine, diphenydramine, promethazine, meclizine and pentazocine, was good, particularly for those whose sensor membrane was prepared with tripelennamine tetraphenylborate dissolved in 2-nitrophenyl octyl ether (type A). Tubular detectors were also prepared using the same sensor membrane and were evaluated in a low-dispersion flow-injection manifold. Under these conditions the detectors presented response characteristics similar to those of the corresponding conventionally-shaped electrodes. The analysis of different pharmaceutical forms (creams, syrups and gels) gave good results with mean recoveries of 99.8-100.6% when the experiments were conducted by direct potentiometry and 99.9-100.4% where the same determinations were conducted by flow-injection analysis with tubular detectors.

New biomimetic sensors for the determination of tetracycline in biological samples: Batch and flow mode operations

New potentiometric membrane sensors with cylindrical configuration for tetracycline (TC) are described based on the use of a newly designed molecularly imprinted polymer (MIP) material consisting of 2-vinylpyridine as a functional monomer in a plasticized PVC membrane. The sensor exhibited significantly enhanced response towards TC over the concentration range 1.59 × 10−5–1.0 × 10−3 mol L−1 at pH 3–5 with a lower detection limit of 1.29 × 10−5 mol L−1. The response was near-Nernstian, with average slopes of 63.9 mV decade−1. The effect of lipophilic salts and various foreign common ions were tested and were found to be negligible. The possibility of applying the proposed sensor to TC determination in spiked biological fluid samples was demonstrated.

Benzoate ion-selective electrode with improved selectivity and reproducibility for benzoate determination in medicinal syrups

This paper describes the construction and evaluation of a benzoate anion selective electrode with enhanced working characteristics, namely reproducibility and selectivity, to be used in medicinal syrups analysis by direct potentiometry. The electrode, without an internal reference solution, was prepared with a PVC membrane, based onbis(triphenylphosphoranylidene) ammonium benzoate as ion-exchanger, dissolved in 2-nitrophenyl octyl ether as mediator solvent and 4-t-octylphenol as additive. The characteristics of the electrodes were evaluated in sodium benzoate solutions with adjusted ionic strength and showed a linear response in the range 10−2−2 × 10−4 mol dm−3 with a slope of 54.7 ± 0.5 mV/decade and a reproducibility of ±0.2 mV/day for solutions with pH 6.3. The potentiometric selectivity coefficients were determined for some possible interfering species and showed that the electrodes prepared with the additive had good selectivity, especially over iodide and nitrate, when compared with those without any additive. The electrodes were used for benzoate determinations in several medicinal syrups by direct potentiometry. The results gave recovery values in the range 98.3–104.6%.

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL−1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10−5–1.0 × 10−3 M), low detection limit (0.9 µg mL−1), and a stable baseline for a 5 × 10−2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.

Imprinting Technology in Electrochemical Biomimetic Sensors

Biosensors are a promising tool offering the possibility of low cost and fast analytical screening in point-of-care diagnostics and for on-site detection in the field. Most biosensors in routine use ensure their selectivity/specificity by including natural receptors as biorecognition element. These materials are however too expensive and hard to obtain for every biochemical molecule of interest in environmental and clinical practice. Molecularly imprinted polymers have emerged through time as an alternative to natural antibodies in biosensors. In theory, these materials are stable and robust, presenting much higher capacity to resist to harsher conditions of pH, temperature, pressure or organic solvents. In addition, these synthetic materials are much cheaper than their natural counterparts while offering equivalent affinity and sensitivity in the molecular recognition of the target analyte. Imprinting technology and biosensors have met quite recently, relying mostly on electrochemical detection and enabling a direct reading of different analytes, while promoting significant advances in various fields of use. Thus, this review encompasses such developments and describes a general overview for building promising biomimetic materials as biorecognition elements in electrochemical sensors. It includes different molecular imprinting strategies such as the choice of polymer material, imprinting methodology and assembly on the transduction platform. Their interface with the most recent nanostructured supports acting as standard conductive materials within electrochemical biomimetic sensors is pointed out.

Host-Tailored Sensors for Leucomalachite Green Potentiometric Measurements

A new biomimetic sensor for leucomalachite green host-guest interactions and potentiometric transduction is presented. The artificial host was imprinted in methacrylic acid or acrylamido-2-methyl-1-propanesulfonic acid-based polymers. Molecularly imprinted particles were dispersed in 2-nitrophenyloctyl ether and trapped in poly(vinyl chloride). The potentiometric sensors exhibited a near-Nernstian response in steady state evaluations, with slopes and detection limits ranging from 45.8 to 81.2 mV and 0.28 to 1.01 , respectively. They were independent from the pH of test solutions within 3 to 5. Good selectivity was observed towards drugs that may contaminate water near fish cultures, such as oxycycline, doxycycline, enrofloxacin, trimethoprim, creatinine, chloramphenicol, and dopamine. The sensors were successfully applied to field monitoring of leucomalachite green in river samples. The method offered the advantages of simplicity, accuracy, applicability to colored and turbid samples, and automation feasibility.