Maria Helena Araujo

Synthesis and characterization of the europium(III) pentakis(picrate) complexes with imidazolium countercations: structural and photoluminescence study.

Six new lanthanide complexes of stoichiometric formula (C)(2)[Ln(Pic)(5)]--where (C) is a imidazolium cation coming from the ionic liquids 1-butyl-3-methylimidazolium picrate (BMIm-Pic), 1-butyl-3-ethylimidazolium picrate (BEIm-Pic), and 1,3-dibutylimidazolium picrate (BBIm-Pic), and Ln is Eu(III) or Gd(III) ions--have been prepared and characterized. To the best of our knowledge, these are the first cases of Ln(III) pentakis(picrate) complexes. The crystal structures of (BEIm)(2)[Eu(Pic)(5)] and (BBIm)(2)[Eu(Pic)(5)] compounds were determined by single-crystal X-ray diffraction. The [Eu(Pic)(5)](2-) polyhedra have nine oxygen atoms coordinated to the Eu(III) ion, four oxygen atoms from bidentate picrate, and one oxygen atom from monodentate picrate. The structures of the Eu complexes were also calculated using the sparkle model for lanthanide complexes, allowing an analysis of intramolecular energy transfer processes in the coordination compounds. The photoluminescence properties of the Eu(III) complexes were then studied experimentally and theoretically, leading to a rationalization of their emission quantum yields.

Use of activated carbon as a reactive support to produce highly active-regenerable Fe-based reduction system for environmental remediation

Composites based on iron supported on high surface area activated carbon were prepared and characterized with (57)Fe Mössbauer spectroscopy, X-ray diffraction, saturation magnetization measurements and temperature-programmed reduction. Upon thermal treatment, the supported iron oxides react with carbon to yield reduced chemical species, i.e. Fe(3)O(4) and Fe(0). This so produced composite was found to be highly efficient in two environmental applications: (i) degradation of textile dye and (ii) reduction of Cr(VI) in aqueous medium. Sequential reuses evidenced a progressive chemical deactivation of the composites due to a corresponding oxidation of the reactive species. Even after being virtually deactivated, the initial chemical reducing ability of the composites can be regenerated by heating at 800 degrees C under N(2) atmosphere, and then reused for several consecutive times.

Ruthenium complexes endowed with potent anti-Trypanosoma cruzi activity: Synthesis, biological characterization and structure–activity relationships

Although effective against epimastigotes (proliferative form) and of low cytotoxicity in mammals, the aryl-4-oxothiazolylhydrazones (ATZ) display only limited activity against trypomastigotes (bloodstream form) of Trypanosoma cruzi. Considering the metal complexation approach with bioactive ligands as one possible strategy for improving the biological efficacy of ATZ, a set of eight new ruthenium-ATZ complexes (RuCl(2)ATZCOD, COD is 1,5-cyclooctadiene) were prepared, chemically and biologically characterized, including in vitro assays against epimastigotes and trypomastigote forms of the parasite and also assessment of cytotoxicity in mammals. Two of these complexes presented antitrypanosomal activity at non-cytotoxic concentrations on mammalian cells and of higher potency than its metal-free ligands, while the metallic precursor [RuCl(2)COD(MeCN)(2)] showed only moderate antitrypanosomal activity. Comparative analysis between the ruthenium complexes and metal-free ligands demonstrated the usefulness of this approach, with the establishment of new SAR data. Additional pharmacological tests, including a DNA bond assay, gave rise to the proposal of a single preliminary explanation for the molecular origin of the bioactivity.

Iron: a versatile element to produce materials for environmental applications

Iron is a versatile element forming several phases with different oxidation states and structures, such as Feo, FeO, Fe3O4, γ-Fe2O3, α-Fe2O3 and FeOOH. All these phases have unique physicochemical properties which can be used for different applications. In this work, it is described the use of different iron compounds, synthetic and also from natural and waste sources, in environmental and technological applications. Two main research areas are described. The first one is related to strategies to increase the reactivity of Fe phases, mainly by the formation of Feo/iron oxide composites and by the introduction of new metals in the iron oxide structure to promote new surface reactions. The second area is the use of the magnetic properties of some iron phases to produce versatile magnetic materials with focus in adsorption, catalysis and emulsions.

Acid-catalyzed oligomerization of glycerol investigated by electrospray ionization mass spectrometry

Acid-catalyzed oligomerization of glycerol was investigated by direct infusion electrospray ionization mass spectrometry in the positive ion mode, i.e. ESI(+)-MS. The ESI(+)-MS data revealed that at 280 oC and in acidic medium (pH 2), glycerol undergoes successive intermolecular condensations to produce oligomeric species, i.e. [(glycerol)n - (n - 1) H2O] (n = 2-5). These ESI(+)-MS data, in association with the information provided by IR, 1H and 13C NMR analyses, indicated that these oligomers undergo intramolecular dehydrations to form miscellaneous products comprised mainly by cyclic compounds as well as alkenes and carbonylic derivatives (aldehydes and ketones).

Investigation of the solid state reaction of LaMnO3 with Feº and its effect on the catalytic reactions with H2O2

In this work, the reaction of the perovskite LaMnO3.15 with Feo has been promoted by thermal treatment of the mixture Feo/LaMnO3.15 at 200, 400 and 600 oC. Mossbauer spectroscopy, X-ray diffraction (XRD), temperature programmed reduction (TPR) and temperature programmed desorption (O2-TPD) analyses suggested that at 400 and 600 oC oxygen from perovskite is transferred to Feo to produce an oxygen deficient perovskite, LaMnO3-d, and highly dispersed iron oxides, mainly Fe3O4 and FeO. XRD lattice parameters and crystallite size showed that LaMnO3 suffers a strong lattice distortion after reaction but no collapse of the perovskite structure. Reactivity studies pointed to a special interface effect of Feo/LaMO3 towards two reactions with H2O2, the decomposition to O2 and the oxidation of the model molecule, the methylene blue dye. As the treatment temperature of the Feo/LaMnO3.15 increased, the activity for H2O2 decomposition decreased, whereas the activity for the dye oxidation increased. These results are discussed in terms of a decrease in the concentration of Mn4+surf and Mn3+surf species, active for the H2O2 decomposition, with the formation of Mn2+surf and Fe2+surf species, active for the Fenton reaction.

Molecular hybridization as a powerful tool towards multitarget quinoidal systems: synthesis, trypanocidal and antitumor activities of naphthoquinone-based 5-iodo-1,4-disubstituted-, 1,4- and 1,5-disubstituted-1,2,3-triazoles

Quinonoid compounds based on 5-iodo-1,4-disubstituted-, 1,4- and 1,5-disubstituted-1,2,3-triazoles were synthesized using simple methodologies and evaluated against T. cruzi, the etiological agent of Chagas disease, and cancer cell lines PC3, HCT-116, HL-60, MDA-MB-435 and SF-295. The cytotoxic potential of the lapachones was also assayed against peripheral blood mononuclear cells (PBMC). Two compounds 6 and 12 were identified as potential hits against T. cruzi. β-Lapachone-based 1,5-disubstituted-1,2,3-triazole (12) displayed an IC50/24 h = 125.1 μM, similar to benznidazole, the standard drug. Compound 12 was also more active than the precursor β-lapachone against the cancer cell lines. These compounds acting as multitarget quinoidal systems could provide promising new leads for the development of trypanocidal and/or anticancer drugs.

Magnetic composites based on metallic nickel and molybdenum carbide: A potential material for pollutants removal

New magnetic composites based on metallic nickel and molybdenum carbide, Ni/Mo(2)C, have been produced via catalytic chemical vapor deposition from ethanol. Scanning electron microscopy, thermal analysis, Raman spectroscopy and X-ray diffraction studies suggest that the CVD process occurs in a single step. This process involves the reduction of NiMo oxides at different temperatures (700, 800 and 900°C) with catalytic deposition of carbon from ethanol producing molybdenum carbide on Ni surface. In the absence of molybdenum the formation of Ni/C was observed. The magnetic molybdenum carbide was successfully used as pollutants removal by adsorption of sulfur and nitrogen compounds from liquid fuels and model dyes such as methylene blue and indigo carmine. The dibenzothiofene adsorption process over Ni/Mo(2)C reached approximately 20 mg g(-1), notably higher than other materials described in the literature and also removed almost all methylene blue dye. The great advantage of these carbide composites is that they may be easily recovered magnetically and reused.

Devulcanization of styrenebutadiene (SBR) waste tire by controlled oxidation

This work describes the devulcanization of vulcanized SBR (Styrene Butadiene Rubber) based on controlled oxidation with nitric acid. IR, 1H and 13C-NMR, CHN elemental analyses, TG, GPC and TPD-MS (Temperature Programmed Decomposition-Mass Spectrometry) experiments suggest that nitric acid promotes two processes: (i) devulcanization by oxidation of the sulfide crosslinks and (ii) oxidation of the carbon framework leading to the formation of -COOH and -NO2 groups. Under aggressive conditions (HNO3, reflux) the polymer chain is strongly oxidized and fragmented to a highly oxygenated low molecular weight fraction, which is soluble in water.

In vitro studies of the activity of dithiocarbamate organoruthenium complexes against clinically relevant fungal pathogens.

The in vitro antifungal activity of nine dirutheniumpentadithiocarbamate complexes C1–C9 was investigated and assessed for its activity against four different fungal species with clinical interest and related to invasive fungal infections (IFIs), such as Candida spp. [C. albicans (two clinical isolates), C. glabrata, C. krusei, C. parapsolisis, C. tropicalis, C.dubliniensis (six clinical isolates)], Paracoccidioides brasiliensis (seven clinical isolates), Cryptococcus neoformans and Sporothrix schenckii. All synthesized complexes C1–C9 and also the free ligands L1–L9 were submitted to in vitro tests against those fungi and the results are very promising, since some of the obtained MIC (minimal inhibitory concentration) values were very low (from 10−6 mol mL−1 to 10−8 mol mL−1) against all investigated clinically relevant fungal pathogens, except for C. glabrata, that the MIC values are close to the ones obtained for fluconazole, the standard antifungal agent tested. Preliminary structure-activity relations (SAR) might be suggested and a strong influence from steric and lipophilic parameters in the antifungal activity can be noticed. Cytotoxicity assays (IC50) showed that the complexes are not as toxic (IC50 values are much higher—30 to 200 fold—than MIC values). These ruthenium complexes are very promising lead compounds for novel antifungal drug development, especially in IFIs, one of most harmful emerging infection diseases (EIDs).