Maria Łebkowska

Effect of a static magnetic field on formaldehyde biodegradation in wastewater by activated sludge.

The aim of this study was to determine the impact of a static magnetic field (MF) of 7 mT on formaldehyde (FA) biodegradation by activated sludge in synthetic wastewater. The MF had a positive effect on activated sludge biomass growth and dehydrogenase activity. The influence of the MF on the degradation process was observed with a FA concentration of 2400-2880 mg/l. Decreases in FA concentration and chemical oxygen demand (COD) were greater, by 30% and 26% respectively, than those in the control sample. At initial FA concentrations in raw wastewater of 2400 and 2880 mg/l, a decrease in the wastewater biodegradation efficiency was observed. This resulted in an increase of the ecotoxicity of the effluent to Daphnia magna. The value of the sludge biotic index (SBI) was dependent on the FA concentration in raw wastewater and the induction of the MF.

Bioleaching of metals from printed circuit boards supported with surfactant-producing bacteria.

This study has evaluated the possibility of bioleaching zinc, copper, lead, nickel, cadmium and chromium from printed circuit boards by applying a culture of sulphur-oxidising bacteria and a mixed culture of biosurfactant-producing bacteria and sulphur-oxidising bacteria. It was revealed that zinc was removed effectively both in a traditional solution acidified by a way of microbial oxidation of sulphur and when using a microbial culture containing sulphur-oxidising and biosurfactant-producing bacteria. The average process efficiency was 48% for Zn dissolution. Cadmium removal was similar in both media, with a highest metal release of 93%. For nickel and copper, a better effect was obtained in the acidic medium, with a process effectiveness of 48.5% and 53%, respectively. Chromium was the only metal that was removed more effectively in the bioleaching medium containing both sulphur-oxidising and biosurfactant-producing bacteria. Lead was removed from the printed circuit boards with very low effectiveness (below 0.5%). Aerating the culture medium with compressed air increased the release of all metals in the medium with sulphur and biosurfactant, and of Ni, Cu, Zn and Cr in the acidic medium. Increasing the temperature of the medium (to 37°C) had a more significant impact in the acidic environment than in the neutral environment.

Effect of a static magnetic field of 7 mT on formaldehyde biodegradation in industrial wastewater from urea-formaldehyde resin production by activated sludge.

The goal of this study was to assess the efficiency of treating industrial urea-formaldehyde wastewater by activated sludge in a static magnetic field (MF) of 7 mT and the efficiency of treating the wastewater in a bioreactor not exposed to an MF. Exposure to the MF increased formaldehyde (FA) removal from industrial wastewater with an FA concentration of 1600 mg/l by 20%. The MF had also a positive effect on the efficiency of chemical oxygen demand (COD) removal, and bacteria and activated sludge biomass growth, especially when the COD loading increased rapidly. Industrial wastewater may contain up to 13000 mg FA/l. Therefore, its treatment can require the application of more than one method to ensure that the final FA concentration will be within the permissible limit. The application of an MF to enhance the biological processes may be favourable solution to this problem.

From macro to lab-scale: Changes in bacterial community led to deterioration of EBPR in lab reactor

A laboratory scale sequencing batch reactor (SBR), fed with synthetic wastewater containing a mixture of organic compounds, was operated for nearly six months. Despite maintaining the same operational conditions, a deterioration of enhanced biological phosphorus removal (EBPR) occurred after 40 days of SBR operation. The Prel/Cupt ratio decreased from 0.28 to 0.06 P-mol C-mol−1, and C requirements increased from 11 to 32 mg C h−1 g−1 of mixed liquor suspended solids. A FISH analysis showed that the percentage of Accumulibacter in an overall community of polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs) dropped from 93% to 13%. An increase in abundance of Gammaproteobacteria (from 2.6% to 22%) and Alphaproteobacteria (from 1.8% to 10%) was observed. The number of Competibacter increased from 0.5% to nearly 9%. Clusters 1 and 2 of Defluviicoccus-related GAOs, not detected before deterioration, constituted 35% and 27% of Alphaproteobacteria, respectively. We concluded that lab-scale experiments should not be extended implicitly to full-scale EBPR systems because some bacterial groups are detected mainlyin lab-scale reactors. Well-defined, lab-scale operational conditions reduce the number of ecological niches available to bacteria.

Air purification from TCE and PCE contamination in a hybrid bioreactors and biofilter integrated system

A two-stage waste air treatment system, consisting of hybrid bioreactors (modified bioscrubbers) and a biofilter, was used to treat waste air containing chlorinated ethenes - trichloroethylene (TCE) and tetrachloroethylene (PCE). The bioreactor was operated with loadings in the range 0.46-5.50gm(-3)h(-1) for TCE and 2.16-9.02gm(-3)h(-1) for PCE. The biofilter loadings were in the range 0.1-0.97gm(-3)h(-1) for TCE and 0.2-2.12gm(-3)h(-1) for PCE. Under low pollutant loadings, the efficiency of TCE elimination was 23-25% in the bioreactor and 54-70% in the biofilter. The efficiency of PCE elimination was 44-60% in the bioreactor and 50-75% in the biofilter. The best results for the bioreactor were observed one week after the pollutant loading was increased. However, the process did not stabilize. In the next seven days contaminant removal efficiency, enzymatic activity and biomass content were all diminished.

Application of white-rot fungi for biodegradation of refractory organic compounds—a review

AbstractThe article presents an overview of literary sources on the use of fungi that cause white rot for removal of organic pollutants from water, wastewater and wastewater sludge. The study characterizes enzymes produced by these fungi, and the methods and conditions for their culture. The article includes some examples of the use of fungi for treatment of wastewater from paper, textile, alcohol and food production, among others, and for biodegradation of dyes, hydrocarbons, phenols, chlorophenols, nitrotoluen and pesticides. It discusses some technological parameters of devices used for elimination of pollutants from wastewater with the use of white-rot fungi. The article highlights the need to extend research work from lab scale to semi-technical scale.

The influence of petroleum products on the methane fermentation process.

In this study the influence of the petroleum products: diesel fuel and spent engine oil on the sewage sludge digestion process and biogas production efficiency was investigated. Microbiological, chemical and enzymatic analyses were applied in the survey. It was revealed that the influence of the petroleum derivatives on the effectiveness of the methane fermentation of sewage sludge depends on the type of the petroleum product. Diesel fuel did not limit the biogas production and the methane concentration in the biogas, while spent engine oil significantly reduced the process efficacy. The changes in physical-chemical parameters, excluding COD, did not reflect the effect of the tested substances. The negative influence of petroleum products on individual bacterial groups was observed after 7 days of the process, while after 14 days probably some adaptive mechanisms appeared. The dehydrogenase activity assessment was the most relevant parameter to evaluate the effect of petroleum products contamination. Diesel fuel was probably used as a source of carbon and energy in the process, while the toxic influence was observed in case of spent engine oil.

Role of micro-organisms present in diesel fuel in the microbiological corrosion of carbon steel St3S

AbstractThis study presents the microbiological and chemical characteristics of the water taken from diesel fuel storage tanks. The growth of micro-organisms was monitored in accordance with the ASTM standard test. The observations of damage to St3S steel were made using a scanning microscope, and the composition of the formed corrosion products was determined using an energy dispersive spectroscopy analyser. Micro-organisms causing microbiological corrosion (sulphate-reducing bacteria, iron bacteria, fungi) were found to develop in the water and on the steel discs. The growth of micro-organisms was the most intense on the discs placed at the water–fuel interphase. Microscopic studies revealed that the disc fragment exposed to the organic phase (fuel) practically did not undergo any corrosion. In the water phase, corrosion was uniform, and its intensity increased with the proximity to the interphase. The highest degree of corrosion was observed on the surface of the steel in the area in which the water wa...