Maria Luisa Saladino

Ce:YAG Nanoparticles Embedded in a PMMA Matrix: Preparation and Characterization

A Ce:YAG-poly(methyl methacrylate) composite was prepared using in situ polymerization by embedding the Ce:YAG nanopowder in a blend of methyl methacrylate (MMA) and 2-methacrylic acid (MAA) monomers and activating the photopolymerization using a radical initiator. The obtained nanocomposite was yellow and transparent. Its characterization was performed using transmission electron microscopy, small angle X-ray scattering, (13)C cross-polarization magic-angle spinning nuclear magnetic resonance, and photoluminescence spectroscopy. Results showed that Ce:YAG nanoparticles are well dispersed in the polymeric matrix whose structure is organized in a lamellar shape. The luminescence properties of the nanocomposite do not show quenching or a significant spectral shift, indicating that the nanocomposite can be useful for advanced applications such as white LED construction.

Suzuki-Miyaura cross-coupling of arenediazonium salts catalyzed by alginate/gellan-stabilized palladium nanoparticles under aerobic conditions in water

The use of palladium nanoparticles stabilized by natural beads made of an alginate/gellan mixture in the Suzuki-Miyaura cross-coupling reaction of arenediazonium tetrafluoroborates with potassium aryltrifluoroborates (1 : 1 molar ratio) with loading as low as 0.01–0.002 mol% under aerobic, phosphine-, and base-free conditions in water is described. The catalyst system can be reused several times without significant loss of activity.

Effects of solvent-free microwave extraction on the chemical composition of essential oil of Calamintha nepeta (L.) Savi compared with the conventional production method

The essential oil of Calamintha nepeta has been obtained by solvent-free microwave extraction (SFME) and by classical hydrodistillation (HD). A comparative qualitative-quantitative study on the composition of the oils was carried out. A total of 38 compounds, constituting 97.6% of the oil, were identified in the oil obtained by SFME, whereas 46 compounds, representing 95.4% of the oil, were characterized in the HD oil. SFME-distilled oil is richer in lightly oxygenated monoterpenes (LOM) than HD oil. It also has a higher amount of sesquiterpenes and a lower quantity of hydrocarbon monoterpenes. HD oil seems to be affected by chemical changes more than SFME oil.

Luminescence Properties of Neodymium-Doped Yttrium Aluminium Garnet Obtained by the Co-Precipitation Method Combined with the Mechanical Process

Nanopowders of yttrium aluminium garnet Y3Al5O12 (YAG) doped with neodymium ions were obtained by the co-precipitation method from the reaction of aluminium and yttrium nitrate and neodymium oxide with ammonia. After washing and drying the hydroxide precursors were calcined at 500, 700, 800 and 900 °C for 1 hour and at 1000 °C for 3 hours. This product was treated by ball milling in a zirconia vial for 0.5, 1.5 and 10 h in order to achieve smaller nanoparticles. The structure, microstructure, morphology and optical properties were investigated by means of diffractometric, microscopic and spectroscopic techniques. The course of the amorphous-to-crystalline transformation was complete after calcining the powder for 1 hour at 900 °C. In the sample calcined for 3 hours at 1000 °C, the mean size of crystallite microdomains was reduced from 600 Å to 300, 250 and 160 Å after 0.5, 1.5 and 10 h of mechanical treatment respectively. The treated product was found to be contaminated with ZrO2. This contamination, from the vial and hardened ZrO2 balls reaches ca. 30 wt % after 10 h of mechanical treatment but causes only a slight reduction of the neodymium luminescence life-time, thus maintaining significant applicative properties.

Chromium liquid waste inertization in an inorganic alkali activated matrix: leaching and NMR multinuclear approach

A class of inorganic binders, also known as geopolymers, can be obtained by alkali activation of aluminosilicate powders at room temperature. The process is affected by many parameters (curing time, curing temperature, relative humidity etc.) and leads to a resistant matrix usable for inertization of hazardous waste. In this study an industrial liquid waste containing a high amount of chromium (≈ 2.3 wt%) in the form of metalorganic salts is inertized into a metakaolin based geopolymer matrix. One of the innovative aspects is the exploitation of the water contained in the waste for the geopolymerization process. This avoided any drying treatment, a common step in the management of liquid hazardous waste. The evolution of the process--from the precursor dissolution to the final geopolymer matrix hardening--of different geopolymers containing a waste amount ranging from 3 to 20%wt and their capability to inertize chromium cations were studied by: i) the leaching tests, according to the EN 12,457 regulation, at different curing times (15, 28, 90 and 540 days) monitoring releases of chromium ions (Cr(III) and Cr(VI)) and the cations constituting the aluminosilicate matrix (Na, Si, Al); ii) the humidity variation for different curing times (15 and 540 days); iii) SEM characterization at different curing times (28 and 540 days); iv) the trend of the solution conductivity and pH during the leaching test; v) the characterization of the short-range ordering in terms of TOT bonds (where T is Al or Si) by (29)Si and (27)Al solid state magic-angle spinning nuclear magnetic resonance (ss MAS NMR) for geopolymers containing high amounts of waste (10-20%wt). The results show the formation of a stable matrix after only 15 days independently on the waste amount introduced; the longer curing times increase the matrices stabilities and their ability to immobilize chromium cations. The maximum amount of waste that can be inertized is around 10 wt% after a curing time of 28 days.

Phase formation in mixed TiO2-ZrO2 oxides prepared by sol-gel method

Pure titania, zirconia, and mixed oxides (3–37 mol.% of ZrO2) are prepared using the sol-gel method and calcined at different temperatures. The calcined samples are characterized by Raman spectroscopy, X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption porosimetry. Measurements reveal a thermal stability of the titania anatase phase that slightly increases in the presence of 3–13 mol.% of zirconia. Practically, the titania anatase-rutile phase transformation is hindered during the temperature increase above 700°C. The mixed oxide with 37 mol.% of ZrO2 treated at 550°C shows a new single amorphous phase with a surface area of the nanoparticles double with respect to the other crystalline samples and the formed srilankite structure (at 700°C). The anatase phase is not observed in the sample containing 37 mol.% of ZrO2. The treatment at 700°C causes the formation of the srilankite (Ti0.63Zr0.37Ox) phase.

Polyaminocyclodextrin nanosponges: synthesis, characterization and pH-responsive sequestration abilities

New pH-responsive nanosponges were obtained by reacting four different polyaminocyclodextrins with heptakis-(6-bromo)-(6-deoxy)-β-cyclodextrin. The materials obtained were characterized by various techniques (FT-IR, potentiometric titration, differential scanning calorimetry (DSC), porosimetry (BET), 13C{1H} CP-MAS NMR). Their adsorption abilities at different pH values were verified towards a suitable set of model guests, and seem mainly controlled by electrostatic interactions, as a function of the protonation/charge status of the polymer matrix. By contrast, data positively point out a lesser importance assumed by the induced-fit effect, important in affecting the formation of host–guest complexes in solution. The frequency-switched Lee-Goldburg (FSLG) heteronuclear correlation solid-state NMR technique was exploited in order to assess the possible location of the guests within the polymer matrix.

A study on the essential oil of Ferulago campestris: How much does extraction method influence the oil composition?

The essential oil of different parts of Ferulago campestris (Bess.) collected in Sicily has been extracted by microwave-assisted hydrodistillation (MAHD) and by classic hydrodistillation (HD). A comparative qualitative-quantitative study on the composition of the oils was carried out. A total of 100 compounds were identified in the oils obtained by MAHD, whereas 88 compounds characterized the HD oils. The most prominent components were, in all different parts of F. campestris and in both extraction methods, 2,4,5-trimethylbenzaldehyde and 2,4,6-trimethylbenzaldehyde isomers; the latter was not previously found. The attempt to evaluate where the oil components are located in all parts of the plant was carried out by means of a kinetic study. Then, electron microscopy observation on the different parts before and after MAHD and HD was performed.

Effects of thermal treatment on the structure of Eu:YAG nanopowder

Eu:YAG nanopowder precursors were obtained by co-precipitation of aluminium, yttrium and europium nitrates solution with ammonia. The hydroxides precursors were calcined at different temperatures from 900 to 1200°C as a function of holding time (1, 2 and 6 hours). The presence of Eu3+ ions in the matrix was confirmed by Energy Dispersive X-rays analysis. X-Ray Diffraction investigation by the Rietveld method shows that the sample treated at 900°C for 1 hour is essentially the garnet phase with the minor presence of hexagonal and monoclinic metastable phases. The Eu3+ ions are incorporated into the garnet phase, as is suggested by the lattice parameter value being larger than that in literature data (homogeneous strain). For the sample treated at 900°C for 1 hour, electron microscopy observations showed agglomerates of spherical particles of mean size about 50 nm. At higher temperature treatments and for longer holding times the minority hexagonal and monoclinic phases totally disappeared. However, the lattice parameters of the cubic garnet phase gradually decreased with temperature, suggesting an expulsion of Eu3+ ions from the solid solution. Simultaneous with this, it was noted that the lattice strain reached a maximum value, but to later decrease, due to the vacancies created by the Eu species initially migrating to the surface of the coherent domains of diffraction. The lattice strain definitely decreased upon more drastic thermal treatments. Meanwhile, FEG-SEM and TEM observations on the same samples confirmed the growth of the garnet particles as a function of the thermal treatment.

Synthesis and antibacterial activity of iron-hexacyanocobaltate nanoparticles

This paper deals with the synthesis and characterization of iron-hexacyanocobaltate (FeHCC) and its antibacterial properties. The nanoparticles were prepared by a facile co-precipitation technique. Crystal structure, particle morphology, and elemental composition were determined using X-ray Powder Diffraction, X-ray fluorescence spectroscopy, Transmission Electron Microscopy (TEM), and Infrared Spectroscopy (IR). The antibacterial activity of the FeHCC nanoparticles was tested against Escherichia coli and Staphylococcus aureus as models for Gram-negative and Gram-positive bacteria, respectively, by bacterial counting method and microscopic visualization (TEM, FEG-SEM, and fluorescence microscopy). The results showed that the FeHCC nanoparticles bind to the bacterial cells, inhibit bacterial growth in a dose- and time-dependent manner, inducing a loss of the membrane potential, the production of reactive oxygen species and the release of macromolecules (nucleic acids and proteins) in the extracellular environment. To the best of our knowledge, this is the first study reporting the antimicrobial effects of metal-hexacyanometallates suggesting practical uses of these materials in different areas, such as self-cleaning surfaces or food packaging.