Maria N. Avramova
Pennsylvania State University
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Maria N. Avramova.
Annals of Nuclear Energy | 2002
Jorge Solı́s; Maria N. Avramova; Kostadin Ivanov
Abstract A temporal adaptive algorithm was developed to perform the synchronization and optimization of the performance of TRAC-BF1/NEM/COBRA-TF three-dimensional neutron/thermal-hydraulics sub-channel analysis coupled code system. The multi-level coupling scheme for time synchronization of the TRAC-BF1/NEM and COBRA-TF under PVM is developed considering the different time-step selection algorithms of TRAC-BF1, NEM and COBRA-TF codes. The developed methodology allows one to synchronize the codes in time without doing significant code modifications to the time-step selection logic of the involved codes. The advantage of this approach is that COBRA-TF can capture the nature of a given transient, without losing any time-dependent data. Results for steady state and transient calculations that show how the implemented temporal adaptive algorithm works are presented. In addition selected results are presented to illustrate dynamic behavior and the type of thermal-hydraulic boundary conditions provided by the system code.
Science and Technology of Nuclear Installations | 2013
Maria N. Avramova; Diana Cuervo
Over the last few years, the Pennsylvania State University (PSU) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has prepared, organized, conducted, and summarized two international benchmarks based on the NUPEC data—the OECD/NRC Full-Size Fine-Mesh Bundle Test (BFBT) Benchmark and the OECD/NRC PWR Sub-Channel and Bundle Test (PSBT) Benchmark. The benchmarks’ activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and the Japan Nuclear Energy Safety (JNES) Organization. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known sub-channel code COBRA-TF (Coolant Boiling in Rod Array-Two Fluid), namely, CTF, to the steady state critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks. The goal is two-fold: firstly, to assess these models and to examine their strengths and weaknesses; and secondly, to identify the areas for improvement.
Science and Technology of Nuclear Installations | 2013
Maria N. Avramova; A. Velazquez-Lozada; A. Rubin
The international OECD/NRC PSBT benchmark has been established to provide a test bed for assessing the capabilities of thermal-hydraulic codes and to encourage advancement in the analysis of fluid flow in rod bundles. The benchmark was based on one of the most valuable databases identified for the thermal-hydraulics modeling developed by NUPEC, Japan. The database includes void fraction and departure from nucleate boiling measurements in a representative PWR fuel assembly. On behalf of the benchmark team, PSU in collaboration with US NRC has performed supporting calculations using the PSU in-house advanced thermal-hydraulic subchannel code CTF and the US NRC system code TRACE. CTF is a version of COBRA-TF whose models have been continuously improved and validated by the RDFMG group at PSU. TRACE is a reactor systems code developed by US NRC to analyze transient and steady-state thermal-hydraulic behavior in LWRs and it has been designed to perform best-estimate analyses of LOCA, operational transients, and other accident scenarios in PWRs and BWRs. The paper presents CTF and TRACE models for the PSBT void distribution exercises. Code-to-code and code-to-data comparisons are provided along with a discussion of the void generation and void distribution models available in the two codes.
Science and Technology of Nuclear Installations | 2014
Maria N. Avramova; Annalisa Manera; D.R. Novog; Diana Cuervo; A. Petruzzi
Historically, the prediction of safety margins has been based on system level thermal-hydraulic calculations employing suitable empirical formulations for assembly specific geometries and fuel-element grid spacers. These works have assessed response, margins, and consequences for the system based on one-dimensional two-fluid or drift-flux type thermalhydraulics formulations with fuel-vendor specific hydraulic losses and heat transfer characteristics for various fuel assemblies, including the so-called hot channel. Analysis of the hot channel gives important information on flow rates, fuel element centerline temperature, fuel sheath temperature, and margin to the departure from nucleate boiling. Given the reliance of the above approaches on empirical formulations obtained from complex and often difficult experiments, there is significant interest in obtaining reliable and accurate results from computation tools which employ more fundamental empirical relationships which can be obtained from subsets of the domain or from other scaled experiments.
Annals of Nuclear Energy | 2007
Kostadin Ivanov; Maria N. Avramova
Progress in Nuclear Energy | 2010
Maria N. Avramova; Kostadin Ivanov
Annals of Nuclear Energy | 2006
Diana Cuervo; Maria N. Avramova; Kostadin Ivanov; Rafael Miró
Annals of Nuclear Energy | 2013
Federico Puente Espel; Maria N. Avramova; Kostadin Ivanov; Stefan Misu
Archive | 2006
Maria N. Avramova; Diana Cuervo; Kostadin Ivanov
Annals of Nuclear Energy | 2015
Jeffrey Magedanz; Maria N. Avramova; Y. Perin; A.K. Velkov