Maria Olejnik

Imaging of fluorescence enhancement in photosynthetic complexes coupled to silver nanowires

Optical microscopy and spectroscopy of hybrid nanostructures composed of chlorophyll-containing photosynthetic complexes and silver nanowires reveal strong enhancement of fluorescence intensity of chlorophylls bound to the protein. This effect results from interaction between excited states of molecules embedded in the photosynthetic complex and plasmon excitations in metallic nanowires. Wide-field microscopy images reveal twofold increase of the emission intensity for complexes located at the ends of the nanowires as compared to the ones lying along the nanowires. Complementary spectrally and temporally resolved experiments indicate about 10-fold average increase of the chlorophyll fluorescence rate upon coupling with the metallic nanoparticles.

Metal-Enhanced Fluorescence of Chlorophylls in Light-Harvesting Complexes Coupled to Silver Nanowires

We investigate metal-enhanced fluorescence of peridinin-chlorophyll protein coupled to silver nanowires using optical microscopy combined with spectrally and time-resolved fluorescence techniques. In particular we study two different sample geometries: first, in which the light-harvesting complexes are deposited onto silver nanowires, and second, where solution of both nanostructures are mixed prior deposition on a substrate. The results indicate that for the peridinin-chlorophyll complexes placed in the vicinity of the silver nanowires we observe higher intensities of fluorescence emission as compared to the reference sample, where no nanowires are present. Enhancement factors estimated for the sample where the light-harvesting complexes are mixed together with the silver nanowires prior deposition on a substrate are generally larger in comparison to the other geometry of a hybrid nanostructure. While fluorescence spectra are identical both in terms of overall shape and maximum wavelength for peridinin-chlorophyll-protein complexes both isolated and coupled to metallic nanostructures, we conclude that interaction with plasmon excitations in the latter remains neutral to the functionality of the biological system. Fluorescence transients measured for the PCP complexes coupled to the silver nanowires indicate shortening of the fluorescence lifetime pointing towards modifications of radiative rate due to plasmonic interactions. Our results can be applied for developing ways to plasmonically control the light-harvesting capability of photosynthetic complexes.

Plasmonic Molecular Nanohybrids—Spectral Dependence of Fluorescence Quenching

We demonstrate strong spectral dependence of the efficiency of fluorescence quenching in molecular systems composed of organic dyes and gold nanoparticles. In order to probe the coupling with metallic nanoparticles we use dyes with varied spectral overlap between the plasmon resonance and their absorption. Hybrid molecular structures were obtained via conjugation of metallic nanoparticles with the dyes using biotin-streptavidin linkage. For dyes featuring absorption above the plasmon excitation in gold nanoparticles, laser excitation induces minute changes in the fluorescence intensity and its lifetime for both conjugated and non-conjugated mixtures, which are the reference. In contrast, when the absorption of the dye overlaps with the plasmon resonance, the effect is quite dramatic, reaching 85% and 95% fluorescence quenching for non-conjugated and conjugated mixtures, respectively. The degree of fluorescence quenching strongly depends upon the concentration of metallic nanoparticles. Importantly, the origin of the fluorescence quenching is different in the case of the conjugated mixture, as evidenced by time-resolved fluorescence. For conjugated mixtures of dyes resonant with plasmon, excitation features two-exponential decay. This is in contrast to the single exponential decay measured for the off-resonant configuration. The results provide valuable insight into spectral dependence of the fluorescence quenching in molecular assemblies involving organic dyes and metallic nanoparticles.

Polarization control of metal-enhanced fluorescence in hybrid assemblies of photosynthetic complexes and gold nanorods

Fluorescence imaging of hybrid nanostructures composed of a bacterial light-harvesting complex LH2 and Au nanorods with controlled coupling strength is employed to study the spectral dependence of the plasmon-induced fluorescence enhancement. Perfect matching of the plasmon resonances in the nanorods with the absorption bands of the LH2 complexes facilitates a direct comparison of the enhancement factors for longitudinal and transverse plasmon frequencies of the nanorods. We find that the fluorescence enhancement due to excitation of longitudinal resonance can be up to five-fold stronger than for the transverse one. We attribute this result, which is important for designing plasmonic functional systems, to a very different distribution of the enhancement of the electric field due to the excitation of the two characteristic plasmon modes in nanorods.

Spectroscopic studies of plasmon coupling between photosynthetic complexes and metallic quantum dots

Metallic quantum dots, or nanoparticles, have found an increasing number of applications not only in nanotechnology and nanoscience, but also in neighboring disciplines, such as chemistry and biology. Among the variety of ways to exploit the unique properties of metallic nanostructures is the notion that plasmonic effects associated with the movement of free carriers in metallic nanoparticles may enhance photosynthetic function in naturally evolved organisms. We report on optical microscopy and spectroscopy studies of three hybrid nanostructures composed of spherical gold nanoparticles and peridinin-chlorophyll-protein (PCP), a light-harvesting complex from algae. In the case of a bioconjugated structure we find efficient, concentration dependent quenching due to non-radiative energy transfer. In contrast, for the PCP complexes deposited directly on Au nanoparticles, the emission is increased as a result of the strong increase of the fluorescence quantum yield. Finally, for a structure with controlled separation between metallic nanoparticles and the light-harvesting complexes the emission features non-monotonic behavior with maximum enhancement of about 6, which is due to a combination of fluorescence and absorption rate increases. In this way we demonstrate how the design of plasmonic hybrid nanostructures determines the optical response, which is important for engineering novel systems for photovoltaics and sensor applications, for instance.

Fluorescence spectroscopy of semiconductor CdTe nanocrystals: preparation effect on photostability

We report on continuous-wave and time-resolved fluorescence spectroscopy studies of CdTe water-soluble nanocrystals at room temperature. For nanocrystals spread directly on the substrate we observe large variation both in fluorescence maximum energy and fluorescence lifetime. We attribute this to the influence of the surface of the nanocrystals on the stability of excitations in the nanocrystals. As the fluorescence lifetime of the nanocrystals is monitored, we find it increases with time from 6 to 18 ns and then saturates. Placing the nanocrystals in a polymer matrix remarkably improves the photostability and all the above-mentioned effects are diminished. Upon mixing the nanocrystals with gold spherical nanoparticles we observe a decrease of the fluorescence intensity due to efficient energy transfer to the nanoparticles.

Confocal microscopy of plasmonic hybrid nanostructures

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP

Metal-enhanced fluorescence of chlorophylls in light-harvesting complexes coupled to silver nanowires

We present passive mode locking of a vertical external-cavity surface-emitting laser (VECSEL) in the red spectral range. The gain structure includes 20 compressively strained GaInP quantum wells (QWs), which are arranged in a resonant periodic gain design containing five packages of four quantum wells each. We use tensile strained AlGaInP barriers and cladding layers to compensate the strain introduced by the quantum wells. The semiconductor saturable absorber mirror (SESAM) includes two of the same quantum wells as used in the gain structure, positioned close to the surface. The semiconductor structure is grown by MOVPE in a near-resonant design and coated with a fused silica layer for an overall anti-resonant design. For tight focussing of the laser mode onto the absorber, we use a v-shaped cavity with an overall length of 179mm. Autocorrelation measurements show a FWHM pulse duration below 250 fs with side pulses arising due to the diamond heatspreader bonded onto the gain chip. The laser spectrum consists of a soliton-like part at 664.5 nm and a “continuum” which is also found in autocorrelation measurements perfomed in a Hanbury-Brown and Twiss type setup. An FFT based frequency analysis of the emitted pulse train shows a repetition rate of 836MHz. The SESAM charge carrier dynamics were investigated by pump-probe measurements. We observe a tri-exponential decay with a dominant fast decay time in the range of the pulse duration.

Photostability of photosynthetic complexes coupled to silver nanowires

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP