María Satué

Quercitrin and taxifolin stimulate osteoblast differentiation in MC3T3-E1 cells and inhibit osteoclastogenesis in RAW 264.7 cells.

Flavonoids are natural antioxidants that positively influence bone metabolism. The present study screened among different flavonoids to identify biomolecules for potential use in bone regeneration. For this purpose, we used MC3T3-E1 and RAW264.7 cells to evaluate their effect on cell viability and cell differentiation. First, different doses of chrysin, diosmetin, galangin, quercitrin and taxifolin were analyzed to determine the optimum concentration to induce osteoblast differentiation. After 48h of treatment, doses ≥100μM of diosmetin and galangin and also 500μM taxifolin revealed a toxic effect on cells. The same effect was observed in cells treated with doses ≥100μM of chrysin after 14 days of treatment. However, the safe doses of quercitrin (200 and 500μM) and taxifolin (100 and 200μM) induced bone sialoprotein and osteocalcin mRNA expression. Also higher osteocalcin secreted levels were determined in 100μM taxifolin osteoblast treated samples when compared with the control ones. On the other hand, quercitrin and taxifolin decreased Rankl gene expression in osteoblasts, suggesting an inhibition of osteoclast formation. Indeed, osteoclastogenesis suppression by quercitrin and taxifolin treatment was observed in RAW264.7 cells. Based on these findings, the present study demonstrates that quercitrin and taxifolin promote osteoblast differentiation in MC3T3-E1 cells and also inhibit osteoclastogenesis in RAW264.7 cells, showing a positive effect of these flavonoids on bone metabolism.

Bioactive implant surface with electrochemically bound doxycycline promotes bone formation markers in vitro and in vivo

OBJECTIVES The objective of this study was to demonstrate a successful binding of Doxy hyclate onto a titanium zirconium alloy surface. METHODS The coating was done on titanium zirconium coins in a cathodic polarization setup. The surface binding was analyzed by SEM, SIMS, UV-vis, FTIR and XPS. The in vitro biological response was tested with MC3T3-E1 murine pre-osteoblast cells after 14 days of cultivation and analyzed in RT-PCR. A rabbit tibial model was also used to confirm its bioactivity in vivo after 4 and 8 weeks healing by means of microCT. RESULTS A mean of 141 μg/cm(2) of Doxy was found firmly attached and undamaged on the coin. Inclusion of Doxy was documented up to a depth of approximately 0.44 μm by tracing the (12)C carbon isotope. The bioactivity of the coating was documented by an in vitro study with murine osteoblasts, which showed significantly increased alkaline phosphatase and osteocalcin gene expression levels after 14 days of cell culture along with low cytotoxicity. Doxy coated surfaces showed increased bone formation markers at 8 weeks of healing in a rabbit tibial model. SIGNIFICANCE The present work demonstrates a method of binding the broad spectrum antibiotic doxycycline (Doxy) to an implant surface to improve bone formation and reduce the risk of infection around the implant. We have demonstrated that TiZr implants with electrochemically bound Doxy promote bone formation markers in vitro and in vivo.

Flavonoid-Modified Surfaces: Multifunctional Bioactive Biomaterials with Osteopromotive, Anti-Inflammatory, and Anti-Fibrotic Potential

Flavonoids are small polyphenolic molecules of natural origin with antioxidant, anti-inflammatory, and antibacterial properties. Here, a bioactive surface based on the covalent immobilization of flavonoids taxifolin and quercitrin on titanium substrates is presented, using (3-aminopropyl)triethoxysilane (APTES) as coupling agent. FTIR and XPS measurements confirm the grafting of the flavonoids to the surfaces. Using 2-aminoethyl diphenylborinate (DPBA, a flavonoid-specific dye), the modified surfaces are imaged by fluorescence microscopy. The bioactivity of the flavonoid-modified surfaces is evaluated in vitro with human umbilical cord derived mesenchymal stem cells (hUC-MSCs) and human gingival fibroblasts (HGFs) and compared to that of simple flavonoid coatings prepared by drop casting. Flavonoid-modified surfaces show anti-inflammatory and anti-fibrotic potential on HGF. In addition, Ti surfaces covalently functionalized with flavonoids promote the differentiation of hUC-MSCs to osteoblasts--enhancing the expression of osteogenic markers, increasing alkaline phosphatase activity and calcium deposition; while drop-casted surfaces do not. These findings could have a high impact in the development of advanced implantable medical devices like bone implants. Given the broad range of bioactivities of flavonoid compounds, these surfaces are ready to be explored for other biomedical applications, e.g., as stent surface or tumor-targeted functionalized nanoparticles for cardiovascular or cancer therapies.

A New Role for 5‐methoxytryptophol On Bone Cells Function in Vitro

The present study investigates the direct action of 5‐methoxytryptophol (5‐MTX) in both MC3T3‐E1 and RAW264.7 cells and compares it with melatonin (MEL), another 5‐methoxyindol known to play a significant role on bone metabolism. We first screened increasing doses of both 5‐MTX and MEL to determine their effect on metabolic activity and viability of preosteoblastic MC3T3‐E1 cells. The optimal dose was used to determine its effect on differentiation of MC3T3‐E1 cells and preosteoclastic RAW264.7 cells. Finally, we investigated the mechanism of action by adding the melatonin receptor antagonist luzindole (LUZ) and detecting the immunostaining of phospho‐ERK. In MC3T3‐E1 cells, most of the 5‐MTX doses reduced slightly the metabolic activity of osteoblasts compared with the control, while MEL only decreased it for the highest dose (2.5 mM). As regards to cytotoxicity, low doses (0.001–0.1 mM) of both indoles showed a protective effect on osteoblasts, while the highest dose of MEL showed a higher cytotoxicity than the 5‐MTX one. After 14 days of cell culture, Rankl mRNA levels were decreased, especially for 5‐MTX. 5‐MTX also induced a higher osteocalcin secretion and mineralization capacity than MEL. In RAW264.7 cells, 5‐MTX decreased the number of osteoclast formed and its activity whereas MEL did not affect significantly the number of multinucleated TRAP‐positive cells formed and showed a lower activity. Finally, MEL and 5‐MTX promoted activation of the ERK1/2 pathway through the phosphorylation of ERK, while LUZ addition suppressed this effect. In conclusion, the present study demonstrates a new role of 5‐MTX inhibiting osteoclastogenesis and promoting osteoblast differentiation. J. Cell. Biochem. 116: 551–558, 2015.

Cholecalciferol synthesized after UV‐activation of 7‐dehydrocholesterol onto titanium implants inhibits osteoclastogenesis in vitro

UV-activated 7-dehydrocholesterol (7-DHC) has been successfully used as a biocompatible coating for titanium (Ti) implants producing active vitamin D with positive effect on osteoblast differentiation. Since an osseointegrating implant must promote bone formation while delay resorption, here we determine the effect of this coating on the pre-osteoclast cell line RAW 264.7. Moreover, D3 synthesis was optimized by (1) the supplementation with VitE of the 7-DHC coating to reduce 7-DHC oxidation and (2) the addition of an incubation step (48 h at 23°C) after UV-irradiation to favor isomerization. In vitro results with RAW264.7 cells showed no cytotoxic effect of the coatings and a significant decrease of osteoclastogenesis. Indeed, TRAP immunostaining suggested an inhibition of Trap-positive multinucleated cells and the mRNA levels of different phenotypic, fusion, and activity markers were reduced, particularly with 7-DHC:VitE. In conclusion, we demonstrate an improvement of the D3 synthesis from UV-activated 7-DHC when combined with VitE and show that these implants inhibit osteoclastogenesis in vitro.

UV-irradiated 7-dehydrocholesterol coating on polystyrene surfaces is converted to active vitamin D by osteoblastic MC3T3-E1 cells

The aim of the present study was to determine the effects of UV irradiation on the conversion of 7-dehydrocholesterol (7-DHC), which has been coated onto a polystyrene surface, to cholecalciferol (D3), and the resulting effect on the formation of vitamin D (1,25-D3) by MC3T3-E1 cells. The changes in gene expression of the enzymes regulating its hydroxylation, Cyp27b1 and Cyp27a1, were monitored as well as the net effect of the UV-treated 7-DHC coating on cell viability and osteoblast differentiation. MC3T3-E1 cells were found to express the enzymes required for synthesizing active 1,25-D3, and we found a dose-dependent increase in the production of both 25-D3 and 1,25-D3 levels for UV-activated 7-DHC samples unlike UV-untreated ones. Cell viability revealed no cytotoxic effect for any of the treatments, but only for the highest dose of 7-DHC (20 nmol per well) that was UV-irradiated. Furthermore, osteoblast differentiation was increased in cells treated with some of the higher doses of 7-DHC when UV-irradiated, as shown by collagen-I, osterix and osteocalcin relative mRNA levels. The conversion of 7-DHC to preD3 exogenously by UV irradiation and later to 25-D3 by MC3T3-E1 cells was determined for the optimum 7-DHC dose (0.2 nmol per well), i.e. 8.6 ± 0.7% of UV-activated 7-DHC was converted to preD3 and 6.7 ± 2.8% of preD3 was finally converted to 25-D3 under the conditions studied. In conclusion, we demonstrate that an exogenous coating of 7-DHC, when UV-irradiated, can be used to endogenously produce active vitamin D. We hereby provide the scientific basis for UV-activated 7-DHC coating as a feasible approach for implant therapeutics focused on bone regeneration.

UV-activated 7-dehydrocholesterol-coated titanium implants promote differentiation of human umbilical cord mesenchymal stem cells into osteoblasts.

Vitamin D metabolites are essential for bone regeneration and mineral homeostasis. The vitamin D precursor 7-dehydrocholesterol can be used after UV irradiation to locally produce active vitamin D by osteoblastic cells. Furthermore, UV-irradiated 7-dehydrocholesterol is a biocompatible coating for titanium implants with positive effects on osteoblast differentiation. In this study, we examined the impact of titanium implants surfaces coated with UV-irradiated 7-dehydrocholesterol on the osteogenic differentiation of human umbilical cord mesenchymal stem cells. First, the synthesis of cholecalciferol (D3) was achieved through the incubation of the UV-activated 7-dehydrocholesterol coating for 48 h at 23℃. Further, we investigated in vitro the biocompatibility of this coating in human umbilical cord mesenchymal stem cells and its potential to enhance their differentiation towards the osteogenic lineage. Human umbilical cord mesenchymal stem cells cultured onto UV-irradiated 7-dehydrocholesterol-coated titanium implants surfaces, combined with osteogenic supplements, upregulated the gene expression of several osteogenic markers and showed higher alkaline phosphatase activity and calcein blue staining, suggesting increased mineralization. Thus, our results show that the use of UV irradiation on 7-dehydrocholesterol -treated titanium implants surfaces generates a bioactive coating that promotes the osteogenic differentiation of human umbilical cord mesenchymal stem cells, with regenerative potential for improving osseointegration in titanium-based bone anchored implants.

Suture materials affect peri-implant bone healing and implant osseointegration.

The aim of this study was to evaluate the effects of the remnants of two suture materials on osseointegration of titanium implants in a rabbit tibial model. Calibrated defects were prepared in the tibia of five Chinchilla rabbits. Filaments of nonresorbable (NR) nylon or resorbable (R) chitosan were placed at the bone to implant interface, whereas control sites had no suture material. After a healing period of 4 weeks, a pull-out test procedure was performed followed by enzymatic analyses of the wound fluid and relative quantification of mRNA levels for bone-related and cytokine markers from the peri-implant bone. A trend toward a reduced pull-out force was observed in the NR group (NR: 23.0 ± 12.8 N; R: 33.9 ± 11.3 N; control: 33.6 ± 24.0 N). Similarly, the bone resorption marker vacuolar type H+-ATPase was increased in the NR group compared with that in the control group (P = 0.041). The R group showed trends for lower alkaline phosphatase activity and osteocalcin expression and higher total protein content and RNA compared with the control group. In this submerged healing model, peri-implant bone healing was marginally affected by the two suture materials tested. However, there was a tendency toward better osseointegration and lower expression of bone resorption markers in the R group compared with the control group.