Mariana Spulber

Hemoglobin and red blood cells catalyze atom transfer radical polymerization.

Hemoglobin (Hb) is a promiscuous protein that not only transports oxygen, but also catalyzes several biotransformations. A novel in vitro catalytic activity of Hb is described. Bovine Hb and human erythrocytes were found to display ATRPase activity, i.e., they catalyzed the polymerization of vinyl monomers under conditions typical for atom transfer radical polymerization (ATRP). N-isopropylacrylamide (NIPAAm), poly(ethylene glycol) methyl ether acrylate (PEGA), and poly(ethylene glycol) methyl ether methacrylate (PEGMA) were polymerized using organobromine initiators and the reducing agent ascorbic acid in acidic aqueous solution. In order to avoid chain transfer from polymer radicals to Hbs cysteine residues, the accessible cysteines were blocked by a reaction with a maleimide. The formation of polymers with bromine chain ends, relatively low polydispersity indices (PDI), first order kinetics and an increase in the molecular weight of poly(PEGA) and poly(PEGMA) upon conversion indicate that control of the polymerization by Hb occurred via reversible atom transfer between the protein and the growing polymer chain. For poly(PEGA) and poly(PEGMA), the reactions proceeded with a good to moderate degree of control. Sodium dodecyl sulfate (SDS) gel electrophoresis, circular dichroism spectroscopy, and time-resolved ultraviolet-visible (UV-vis) spectroscopy revealed that the protein was stable during polymerization, and only underwent minor conformational changes. As Hb and erythrocytes are readily available, environmentally friendly, and nontoxic, their ATRPase activity is a useful tool for synthetic polymer chemistry. Moreover, this novel activity enhances the understanding of Hbs redox chemistry in the presence of organobromine compounds.

Filling polymersomes with polymers by peroxidase-catalyzed atom transfer radical polymerization.

Polymersomes that encapsulate a hydrophilic polymer are prepared by conducting biocatalytic atom transfer radical polymerization (ATRP) in these hollow nanostructures. To this end, ATRPase horseradish peroxidase (HRP) is encapsulated into vesicles self-assembled from poly(dimethylsiloxane)-block-poly(2-methyl-2-oxazoline) (PDMS-b-PMOXA) diblock copolymers. The vesicles are turned into nanoreactors by UV-induced permeabilization with a hydroxyalkyl phenone and used to polymerize poly(ethylene glycol) methyl ether acrylate (PEGA) by enzyme-catalyzed ATRP. As the membrane of the polymersomes is only permeable for the reagents of ATRP but not for macromolecules, the polymerization occurs inside of the vesicles and fills the polymersomes with poly(PEGA), as evidenced by (1) H NMR. Dynamic and static light scattering show that the vesicles transform from hollow spheres to filled spheres during polymerization. Transmission electron microscopy (TEM) and cryo-TEM imaging reveal that the polymersomes are stable under the reaction conditions. The polymer-filled nanoreactors mimic the membrane and cytosol of cells and can be useful tools to study enzymatic behavior in crowded macromolecular environments.

Poly(N-vinylpyrrolidone)-poly(dimethylsiloxane)-based polymersome nanoreactors for laccase-catalyzed biotransformations.

Laccases (Lac) are oxidizing enzymes with a broad range of applications, for example, in soil remediation, as bleaching agent in the textile industry, and for cosmetics. Protecting the enzyme against degradation and inhibition is of great importance for many of these applications. Polymer vesicles (polymersomes) from poly(N-vinylpyrrolidone)-block-poly(dimethylsiloxane)-block-poly(N-vinylpyrrolidone) (PNVP-b-PDMS-b-PNVP) triblock copolymers were prepared and investigated as intrinsically semipermeable nanoreactors for Lac. The block copolymers allow oxygen to enter and reactive oxygen species (ROS) to leave the polymersomes. EPR spectroscopy proved that Lac can generate ROS. They could diffuse out of the polymersome and oxidize an aromatic substrate outside the vesicles. Michaelis-Menten constants Km between 60 and 143 μM and turn over numbers kcat of 0.11 to 0.18 s(-1) were determined for Lac in the nanoreactors. The molecular weight and the PDMS-to-PNVP ratio of the block copolymers influenced these apparent Michaelis-Menten parameters. Encapsulation of Lac in the polymersomes significantly protected the enzyme against enzymatic degradation and against small inhibitors: proteinase K caused 90% less degradation and the inhibitor sodium azide did not affect the enzymes activity. Therefore, these polymer nanoreactors are an effective means to stabilize laccase.

Charge Transfer Pathways in Three Isomers of Naphthalene-Bridged Organic Mixed Valence Compounds

Naphthalene was substituted at different positions with two identical triarylamine moieties to result in species which are mixed-valence compounds in their one-electron oxidized forms. They were investigated by cyclic voltammetry, optical absorption, EPR spectroscopy, X-ray crystallography, and DFT calculations. When the two redox-active triarylamine moieties are connected to the 2- and 6-positions of the naphthalene bridge, their electronic communication is significantly stronger than when they are linked to the 1- and 5-positions, and this can be understood on the basis of a simple through-bond charge transfer pathway model. However, this model fails to explain why electronic communication between triarylamine moieties in the 1,5- and 1,8-isomers is similarly strong, indicating that through-space charge transfer pathways play an important role in the latter. In particular, charge transfer in the 1,8-isomer is likely to occur between the triarylamino C atoms in α-position to the naphthalene linker because the respective atoms are only about 3 Å apart from each other, and because they carry significant spin density in the one-electron oxidized forms of triarylamines. This particular through-space charge transfer pathway might be generally important in molecular structures based on the 1,8-disubstituted naphthalene pillaring motif.

New concepts to fight oxidative stress: nanosized three-dimensional supramolecular antioxidant assemblies

Introduction: Misregulation of reactive oxygen species and reactive nitrogen species by the body’s antioxidant system results in oxidative stress, which is known to be associated with aging, and involved in various pathologies including cancer, neurodegenerative and cardiovascular diseases. A large variety of low-molecular-weight (LMW) antioxidant compounds and antioxidant enzymes have been proposed to alleviate oxidative stress, but their therapeutic efficacy is limited by their solubility, stability or bioavailability. In this respect, nanoscience-based systems are expected to provide more efficient mitigation of oxidative stress. Areas covered: The main nanoscience-based three-dimensional (3D) supramolecular assemblies, decorated with, or entrapping antioxidant compounds, or which possess intrinsic antioxidant activity are discussed and illustrated with recent examples. Assemblies with different architectures and sizes in the nanometer range serve: i) to deliver LMW antioxidant compounds or enzymes; ii) as antioxidant systems due to their intrinsic activity; and recently iii) to provide a confined space where catalytic antioxidant reactions take place in situ (nanoreactors and artificial organelles). A few insights into the role of antioxidants in mitigating oxidative stress caused by therapeutic compounds or drug carriers are also discussed. Expert opinion: Several challenges must still be overcome in the development of 3D supramolecular assemblies to efficiently fight oxidative stress. First, an improvement of the assemblies’ properties and stability in biological conditions has to be addressed. Second, new systems based on the combination of biomolecules or mimics in supramolecular assemblies should provide multifunctionality, stimuli-responsiveness and targeting properties for a more efficient therapeutic effect. Third, comparative studies are necessary to evaluate these systems in a standardized manner both in vitro and in vivo.

Charge delocalization in an organic mixed valent bithiophene is greater than in a structurally analogous biselenophene.

A series of selenophenes with redox-active amine end-capping groups was synthesized and investigated. A combination of cyclic voltammetry, optical absorption, EPR spectroscopy, and quantum-chemical calculations based on Kohn-Sham density functional theory was used to explore charge delocalization in the monocationic mixed-valence forms of these selenophenes, and the results were compared to those obtained from analogous studies of structurally identical thiophenes. The striking finding is that the comproportionation constant (Kc) for the experimentally investigated biselenophene is more than 2 orders of magnitude lower than for its bithiophene counterpart (in CH3CN with 0.1 M TBAPF6), and the electronic coupling between the two amine end-capping groups in the mixed-valent biselenophene monocation is only roughly half as strong as in the corresponding bithiophene monocation. These are surprisingly large differences given the structural similarity between the respective biselenophene and bithiophene molecules. However, the computationally determined comproportionation constants for biselenophene and bithiophene are almost identical, and the electronic coupling in the monocationic biselenophene is only slightly smaller than that in the monocationic bithiophene. We assume that the external electric field may be responsible for the differences in monocation stabilities between experiment and computation. Our findings indicate that charge delocalization across individual selenophenes tends to be less pronounced than across individual thiophenes, and this may have important implications for long-range charge transfer across selenophene oligomers or polymers.

Poly(N-isopropylacrylamide-co-tris-nitrilotriacetic acid acrylamide) for a combined study of molecular recognition and spatial constraints in protein binding and interactions.

Many biological processes require precise regulation and synergy of proteins, and consequently involve molecular recognition and spatial constraints between biomolecules. Here, a library of poly(N-isopropylacrylamide-co-tris-nitrilotriacetic acid acrylamide) (PNTs) has been synthesized and complexed with Cu(2+) in order to serve as models for investigation of the combined effects of molecular recognition and spatial constraints in biomolecular interactions. The average distance between Cu(2+)-trisNTA binding sites in PNTs polymers was varied from 4.3 to 31.5 nm by adjusting their trisNTA contents. His tag (His6), His-tagged enhanced yellow fluorescent protein (His6-eYFP), and His6-tagged collagenase G (His6-ColG), with sizes ranging from 1 to 11 nm, were used as models to assess whether the binding ability is influenced by a cooperative topology based on molecular recognition interactions with Cu(2+)-trisNTA binding sites, and spatial constraints created by decreasing average distance between trisNTAs. His-tagged molecules bound to all PNTs polymers due to their molecular recognition interaction involving histidines and Cu(2+)-trisNTA pockets, but with a binding ability that was highly modulated by the average distance between the trisNTA binding sites. Small molecular mass molecules (His6) exhibit a high binding ability to all PNTs polymers, whereas his-tagged proteins bind to PNTs efficiently only when the average distance between trisNTA binding sites is larger than the protein dimensions.

Biomimetic artificial organelles with in vitro and in vivo activity triggered by reduction in microenvironment

Despite tremendous efforts to develop stimuli-responsive enzyme delivery systems, their efficacy has been mostly limited to in vitro applications. Here we introduce, by using an approach of combining biomolecules with artificial compartments, a biomimetic strategy to create artificial organelles (AOs) as cellular implants, with endogenous stimuli-triggered enzymatic activity. AOs are produced by inserting protein gates in the membrane of polymersomes containing horseradish peroxidase enzymes selected as a model for natures own enzymes involved in the redox homoeostasis. The inserted protein gates are engineered by attaching molecular caps to genetically modified channel porins in order to induce redox-responsive control of the molecular flow through the membrane. AOs preserve their structure and are activated by intracellular glutathione levels in vitro. Importantly, our biomimetic AOs are functional in vivo in zebrafish embryos, which demonstrates the feasibility of using AOs as cellular implants in living organisms. This opens new perspectives for patient-oriented protein therapy.The efficacy of stimuli-responsive enzyme delivery systems is usually limited to in vitro applications. Here the authors form artificial organelles by inserting stimuli-responsive protein gates in membranes of polymersomes loaded with enzymes and obtain a triggered functionality both in vitro and in vivo.

Investigation of Horseradish Peroxidase Kinetics in an “Organelle‐Like” Environment

In order to mimic cell organelles, artificial nanoreactors have been investigated based on polymeric vesicles with reconstituted channel proteins (outer membrane protein F) and coencapsulated enzymes horseradish peroxidase (HRP) along with a crowding agent (Ficoll or polyethylene glycol) inside the cavity. Importantly, the presence of macromolecules has a strong impact on the enzyme kinetics, but no influence on the integrity of vesicles up to certain concentrations. This particular design allows for the first time the determination of HRP kinetics inside nanoreactors with crowded milieu. The values of the Michaelis-Menten constant (K m ) measured for HRP in a confined space (encapsulated in nanoreactors) in the absence of macromolecules are ≈50% lower than in free conditions, and the presence of a crowding agent results in a further pronounced decrease. These results clearly suggest that activities of enzymes in confined spaces can be tuned by varying the concentrations of crowding compounds. The present investigation represents an advance in nanoreactor design by considering the influence of environmental factors on enzymatic performance, and it demonstrates that both encapsulation and the presence of a crowding environment increase the enzyme-substrate affinity.

Biomimetic Strategy To Reversibly Trigger Functionality of Catalytic Nanocompartments by the Insertion of pH-Responsive Biovalves

We describe an innovative strategy to generate catalytic compartments with triggered functionality at the nanoscale level by combining pH-reversible biovalves and enzyme-loaded synthetic compartments. The biovalve has been engineered by the attachment of stimuli-responsive peptides to a genetically modified channel porin, enabling a reversible change of the molecular flow through the pores of the porin in response to a pH change in the local environment. The biovalve functionality triggers the reaction inside the cavity of the enzyme-loaded compartments by switching the in situ activity of the enzymes on/off based on a reversible change of the permeability of the membrane, which blocks or allows the passage of substrates and products. The complex functionality of our catalytic compartments is based on the preservation of the integrity of the compartments to protect encapsulated enzymes. An increase of the in situ activity compared to that of the free enzyme and a reversible on/off switch of the activity upon the presence of a specific stimulus is achieved. This strategy provides straightforward solutions for the development of catalytic nanocompartments efficiently producing desired molecules in a controlled, stimuli-responsive manner with high potential in areas, such as medicine, analytical chemistry, and catalysis.