Mariângela Fontes Santiago

Production of laccase by Pynoporus sanguineus using 2,5 - Xylidine and ethanol

Enzyme application in biotechnological and environmental processes has had increasing interest due to its efficiency, selectivity and mainly for being environmentally healthful, but these applications require a great volume of enzymes. In this work the effect of different concentrations of ethanol and 2,5-xylidine on growth and production of laccase by Pycnoporus sanguineus was investigated. In a medium containing 200 mg.L-1 of 2,5-xylidine or 50 g.L-1 of ethanol, the maximum activity of laccase was 2019 U.L-1 and 1035 U.L-1, respectively. No direct correlation between biomass and activity of laccase was observed for any of the inducers used during the tests. Ethanol concentrations, larger than or equal to 20 g.L-1, inhibited the radial growth of P. sanguineus. This study showed that ethanol, which has less toxicity and cost than the majority of the studied inducers, presents promising perspectives for laccase production by P. sanguineus.

Production and characterization of tyrosinase activity in Pycnoporus sanguineus CCT-4518 crude extract

Tyrosinase is an enzyme of industrial interest. The production and characterization of tyrosinase from P. sanguineus CCT-4518 were investigated. The selection of inductors, luminosity influence, inoculum size and type of culture medium on the production of tyrosinase and the effect of inhibitors on enzyme activity were performed. Optimum conditions for intracellular tyrosinase production was observed after 2 days using 0.15% L-tyrosine as inducer, in the presence of light, with inoculum size of 10 mycelium discs, using 2% malt extract broth medium, incubated at 30°C, and constant agitation of 150 rpm. Tyrosinase activity was completely inhibited by the addition of 6 mM salicylhydroxamic acid or phenylthiourea, however an inhibition of 4.15% was recorded by the addition of 0.1 mM sodium azide. No inhibition could be detected in case of 0.1 mM phenyl methanesulfonyl fluoride addition. Optimal conditions for intracellular tyrosinase activity using L-dopa as substrate were observed at pH 6.6 and 45°C. Thermal stability studies indicated that the enzyme is stable at 45°C for 15 minutes. Higher temperatures decreased tyrosinase activity. Enzyme production was confirmed by non-denaturing polyacrylamide gel electrophoresis and the protein profile was investigated by denaturing polyacrylamide gel electrophoresis.

Electroanalysis and laccase-based biosensor on the determination of phenolic content and antioxidant power of honey samples

Honey is a functional food widely consumed. Thus, the evaluation of honey samples to determine its phenolic content and antioxidant capacity (AOC) is relevant to determine its quality. Usually AOC is performed by spectrophotometric methods, which lacks reproducibility and practicality. In this context, the electroanalytical methods offer higher simplicity and accuracy. Hence, the aim of this work was to use of electroanalytical tools and laccase based biosensor on the evaluation of AOC and total phenol content (TPC) of honey samples from different countries. The antioxidant power established by electrochemical index presented good correlation with the spectrophotometric FRAP (Ferric Reducing Ability of Plasma) and DPPH (2,2-Diphenyl-1-Picrylhydrazyl) radical scavenging assays. Also, TPC results obtained by the biosensor agreed with the Folin-Ciocalteu (FC) assay. In addition to the semi quantitative results, the electroanalysis offered qualitative parameters, which were useful to indicate the nature of major phenolic compounds.

Efficient Enzyme-Free Biomimetic Sensors for Natural Phenol Detection.

The development of sensors and biosensors based on copper enzymes and/or copper oxides for phenol sensing is disclosed in this work. The electrochemical properties were studied by cyclic and differential pulse voltammetry using standard solutions of potassium ferrocyanide, phosphate/acetate buffers and representative natural phenols in a wide pH range (3.0 to 9.0). Among the natural phenols herein investigated, the highest sensitivity was observed for rutin, a powerful antioxidant widespread in functional foods and ubiquitous in the plant kingdom. The calibration curve for rutin performed at optimum pH (7.0) was linear in a broad concentration range, 1 to 120 µM (r = 0.99), showing detection limits of 0.4 µM. The optimized biomimetic sensor was also applied in total phenol determination in natural samples, exhibiting higher stability and sensitivity as well as distinct selectivity for antioxidant compounds.

Estudo da tratabilidade de efluente da indústria farmacêutica por meio dos fungos Pycnoporus sanguineus, Schizophyllum comnune e fotocatálise

The present work intends to evaluate the tractability of a pharmaceutical effluent by Pycnoporus sanguineus, Schizophyllum commune and heterogenic photocatalysis, using TiO2 as catalyser. It was evaluated enzymatic activity of Laccase, manganese peroxidase, lignin peroxidase, chemical oxygen demand (COD) and toxicity to Artemia salina. It was used the solid culture medium with agar and potato to fungal growth (5 days), however there was a variation: the substitution of distilled water to in natura effluent to induction enzymatic. The bioremediation treatment were done with in natura effluent, sterilized effluent and induction on solid medium and the combined treatment were done with initial biologic treatment before photocatalytic treatment and the opposite of. The highest COD increasing in 48h of fungal treatment were using S. commune and the highest laccase production (17.00 U mL‐1) were by Pycnoporus sanguineus in 96h of treatment and manganese peroxidase production in 24h of treatment (2.00 U mL‐1). In general, the combined treatment showed COD decreasing and enzymatic production smaller than the biological treatment. In all treatment forms, there was no increasing of toxicity to Artemia salina, indicating environmental viability to biological treatment.

Cupuaçu (Theobroma grandiflorum) residue and its potential application in the bioremediation of 17-Α-ethinylestradiol as a Pycnoporus sanguineus laccase inducer

Abstract Bioremediation is a strategy to mitigate environmental impacts of hazardous pollutants from anthropogenic sources. Natural byproducts, including agroindustrial wastes (AW) can be used to induce enzyme biosynthesis, leading up to enhancement of pollutants degradation process. Therefore, this study aimed to evaluate the use of cupuaçu, Theobroma grandiflorum AW as Pycnoporus sanguineus Laccase (Lac) inducer in order to promote 17-α-ethinylestradiol (EE2) bioremediation. The macro and micro-nutrients levels of cupuaçu AWs were evaluated in order to establish further correlations with enzymatic biosynthesis induction. The fungus was cultivated for 7 days in temperature of 28 ± 2 °C and agitation of 150 rpm. For bioremediation, Lac enzymatic extract was added to EE2 solution (10 µg mL−1) and the percentage of removal was evaluated by HPLC after 1–24 hr of reaction. At optimized conditions, the enzyme extract production was remarkably enhanced by adding only 1% (w/v) of cupuaçu AW. Lac activity reached 1642 U mL−1 on the 6th day of culture, which was higher than positive control (511 U mL−1). 86% of EE2 removal was reached after 4 hr, and after 8 hr of reaction, 96.5% was removed. Analysis by direct infusion in MS-ESI-TOF exhibited intermediary compounds formed by radical hydroxilation.

Removal of synthetic sex hormones by hydrothermal carbonization

One of the most prominent fields of environmental chemistry is the study and the removal of micro-pollutants from aqueous matrices. Analytical techniques for their identification and quantification are becoming more sensitive and comprehensive and, as a result, an increasing number of drugs have been detected in environmental samples. However, the literature shows that conventional treatments for drinking water and wastewater are not sufficient for remove these compounds. This study aims to check whether the process of hydrothermal carbonization (CHT) is effective in removing the synthetic sex hormones: ethinyl estradiol, gestodene and cyproterone acetate from aqueous samples. The system used in CHT basically consists of a pressurized reactor made of stainless steel and solutions of compounds of interest, both individual and mixed, with a concentration of 1.0 μg.L-1 and a pH range of 2.0 to 3.0. The maximum surface temperature in the reactor was about 180 °C, the internal pressure was 20 bar with 90 minutes for the reaction. Four experiments were conducted, one for each hormone and one with the three hormones together. In individual tests removal of the compounds was found to be 99.8% for ethinyl estradiol, 99.3% for gestodene and 100% for cyproterone acetate. For a mixture of the hormones treated under the same conditions, the mean values of CHT-removal of Ethinylestradiol, Gestodene and Cyproterone Acetate were 99.60%, 96.80% and 68.90%, respectively. The impact of the matrix effect may have affected the efficiency of the hormone removal process by CHT.

Estudo da descoloração do corante FD&C azul no 2 Indigotina pelo tratamento combinado do fungo Trametes versicolor e processo de filtração lenta

The use of fungi in the decolorization of dyes with economically viable methods of producing bacteriologically safe water has long been described by several authors. This study aimed to investigate the removal efficiency of artificial coloring FD&C Blue no 2 Indigo, using the degradation white fungus Trametes versicolor in combination with slow sand filtration. Two prototype filters slowly termed FL-A and FL-B were installed - the supernatant water of filter FL-A was inoculated with the fungus, while filter FL-B was used as control. The best percentage of dye removal by the fungus Trametes versicolor in combination with the slow sand filtration was 44.74% achieved 24 hours after the maximum laccase activity. The results show that the combination of the fungus T. versicolorwith slow sand filtration treatment presents no great potential for color removal at 21 days of treatment, whereas microbial products generated interfere with the filtration process, lowering the efficiency of the physical process. However, with the restriction of the handling time into 24 hours after the maximum enzymatic activity, combined treatment showed good efficiency.