Marianne Alphonse Mahrouse

A validated spectrofluorimetric method for the determination of nifuroxazide through coumarin formation using experimental design

BackgroundNifuroxazide (NF) is an oral nitrofuran antibiotic, having a wide range of bactericidal activity against gram positive and gram negative enteropathogenic organisms. It is formulated either in single form, as intestinal antiseptic or in combination with drotaverine (DV) for the treatment of gastroenteritis accompanied with gastrointestinal spasm. Spectrofluorimetry is a convenient and sensitive technique for pharmaceutical quality control. The new proposed spectrofluorimetric method allows its determination either in single form or in binary mixture with DV. Furthermore, experimental conditions were optimized using the new approach: Experimental design, which has many advantages over the old one, one variable at a time (OVAT approach).ResultsA novel and sensitive spectrofluorimetric method was designed and validated for the determination of NF in pharmaceutical formulation. The method was based upon the formation of a highly fluorescent coumarin compound by the reaction between NF and ethylacetoacetate (EAA) using sulfuric acid as catalyst. The fluorescence was measured at 390 nm upon excitation at 340 nm. Experimental design was used to optimize experimental conditions. Volumes of EAA and sulfuric acid, temperature and heating time were considered the critical factors to be studied in order to establish an optimum fluorescence. Each two factors were co-tried at three levels. Regression analysis revealed good correlation between fluorescence intensity and concentration over the range 20–400 ng ml-1. The suggested method was successfully applied for the determination of NF in pure and capsule forms. The procedure was validated in terms of linearity, accuracy, precision, limit of detection and limit of quantification. The selectivity of the method was investigated by analysis of NF in presence of the co-mixed drug DV where no interference was observed. The reaction pathway was suggested and the structure of the fluorescent product was proposed. Statistical comparison between the presented method and a reported spectrophotometric one was carried out on pure and pharmaceutical formulation and revealed no significant difference.ConclusionThe proposed method was considered economic, accurate, precise and highly sensitive. It could be easily applied in laboratory quality control for the analysis of NF in pure form and in pharmaceutical dosage form.

Simultaneous Determination of Amlodipine Besylate and Atorvastatin Calcium in Binary Mixture by Spectrofluorimetry and HPLC Coupled with Fluorescence Detection

Caduet tablets are novel prescription drug that combines amlodipine besylate (AM) with atorvastatin calcium (AT). A spectrofluorimetric and an HPLC-fluorescence detection methods were developed for simultaneous determination of both drugs in tablets. In the spectrofluorimetric method, native fluorescence of AM and AT were measured in methanol at 442 and 369 nm upon excitation at 361 and 274 nm, respectively. The emission spectrum of each drug reveals zero value at the emission wavelength of the other drug, thus allowing their simultaneous determination without interference. In the HPLC method, separation of AM and AT was achieved within 8 minutes on a C18 column using acetonitrile:phosphate buffer (0.015 M, pH 3) (45:55, v/v) as the mobile phase. Fluorescence detection was carried out using excitation wavelengths 361 and 274 nm and emission wavelengths 442 and 378 nm for AM and AT, respectively. Excellent linearity was observed. Careful validation proved advantages of the new methods: high sensitivity, accuracy, selectivity and suitability for quality control laboratories.

Utility of Experimental Design in Pre-Column Derivatization for the Analysis of Tobramycin by HPLC-Fluorescence Detection: Application to Ophthalmic Solution and Human Plasma.

A novel, selective, and sensitive reversed phase high-performance liquid chromatography (HPLC) method coupled with fluorescence detection has been developed for the determination of tobramycin (TOB) in pure form, in ophthalmic solution and in spiked human plasma. Since TOB lacks UV absorbing chromophores and native fluorescence, pre-column derivatization of TOB was carried out using fluorescamine reagent (0.01%, 1.5 mL) and borate buffer (pH 8.5, 2 mL). Experimental design was applied for optimization of the derivatization step. The resulting highly fluorescent stable derivative was chromatographed on C18 column and eluted using methanol:water (60:40, v/v) at a flow rate of 1 mL min−1. A fluorescence detector (λex 390 and λem 480 nm) was used. The method was linear over the concentration range 20–200 ng mL−1. The structure of the fluorescent product was proposed, the method was then validated and applied for the determination of TOB in human plasma. The results were statistically compared with the reference method, revealing no significant difference.

Spectrofluorimetric determination of gemifloxacin mesylate and linezolid in pharmaceutical formulations: Application of quinone-based fluorophores and enhanced native fluorescence

Abstract Quinone-based fluorophores and enhanced native fluorescence techniques were applied for a fast quantitative analysis of gemifloxacin mesylate (GEM) and linezolid (LIN) in pharmaceutical formulations. For this purpose, three sensitive, accurate and precise spectrofluorimetric methods were developed. GEM, as an n-electron donor, reacts with 7,7,8,8-tetracyanoquinodimethane (method A) and 2,5-dichloro-3,6-dihydroxy-p-benzoquinone (method B) as п-electron acceptors, forming charge transfer complexes that exhibit high fluorescence intensity at 441 and 390 nm upon excitation at 260 and 339 nm, respectively. Method C depends on measurement of enhanced native fluorescence of LIN in phosphate buffer (pH 5) at 380 nm upon excitation at 260 nm. Experimental factors affecting fluorescence intensity were optimized. Linearity was obtained over concentration ranges 50-500, 10-60 and 20-400 ng mL-1 for methods A, B and C, respectively. The developed methods were validated and successfully applied for determination of the cited drugs in tablets.

Smart spectrophotometric methods based on normalized spectra for simultaneous determination of alogliptin and metformin in their combined tablets

Alogliptin (ALO) and metformin (MET) are coformulated for the treatment of type II diabetes mellitus. ALO is estimated at its λmax 277 nm (0D), while MET was determined accurately by four spectrophotometric methods with minimum manipulation steps based on normalized division spectrum namely; ratio difference, advanced amplitude modulation, first derivative ratio (1DD) and mean centering of the ratio spectra spectrophotometric methods. Linearity was acceptable over the concentration ranges of 5-40 and 2-16 μg/mL for ALO and MET, respectively. Accuracy and precision of the suggested methods were found to be within the acceptable limit. The specificity was inspected by analyzing laboratory prepared mixtures of the above drugs and their pharmaceutical preparation. The results of proposed and reported methods were statistically compared showing no significant difference regarding accuracy and precision. The developed methods could be applied for routine analysis of the cited drugs in quality control laboratories.

Resolution of overlapped spectra for the determination of ternary mixture using different and modified spectrophotometric methods

Four new spectrophotometric methods were developed, applied to resolve the overlapped spectra of a ternary mixture of [aliskiren hemifumarate (ALS)-amlodipine besylate (AM)-hydrochlorothiazide (HCT)] and to determine the three drugs in pure form and in combined dosage form. Method A depends on simultaneous determination of ALS, AM and HCT using principal component regression and partial least squares chemometric methods. In Method B, a modified isosbestic spectrophotometric method was applied for the determination of the total concentration of ALS and HCT by measuring the absorbance at 274.5nm (isosbestic point, Aiso). On the other hand, the concentration of HCT in ternary mixture with ALS and AM could be calculated without interference using first derivative spectrophotometric method by measuring the amplitude at 279nm (zero crossing of ALS and zero value of AM). Thus, the content of ALS was calculated by subtraction. Method C, double divisor first derivative ratio spectrophotometry (double divisor (1)DD method), was based on that for the determination of one drug, the ratio spectra were obtained by dividing the absorption spectra of its different concentrations by the sum of the absorption spectra of the other two drugs as a double divisor. The first derivative of the obtained ratio spectra were then recorded using the appropriate smoothing factor. The amplitudes at 291nm, 380nm and 274.5nm were selected for the determination of ALS, AM and HCT in their ternary mixture, respectively. Method D was based on mean centering of ratio spectra. The mean centered values at 287, 295.5 and 269nm were recorded and used for the determination of ALS, AM and HCT, respectively. The developed methods were validated according to ICH guidelines and proved to be accurate, precise and selective. Satisfactory results were obtained by applying the proposed methods to the analysis of pharmaceutical dosage form.

A validated LC-MS/MS method for simultaneous determination of linagliptin and metformin in spiked human plasma coupled with solid phase extraction: Application to a pharmacokinetic study in healthy volunteers

&NA; Combination therapy has a pivotal role in type II diabetes mellitus management in patients unable to maintain normal glycemic level using metformin alone. Addition of linagliptin, dipeptidyl peptidase‐IV inhibitor, to metformin improves glycemic control. This study is concerned with the development of an HPLC‐MS/MS method for simultaneous quantification of linagliptin and metformin in spiked human plasma. The method was applied to evaluate the potential pharmacokinetic interactions between the cited drugs in healthy volunteers. Solid phase extraction was applied using Strata™ X cartridge. Separation was carried out on Symmetry® C18 column using methanol: 10 mM ammonium formate buffer (containing 0.2% formic acid) in a ratio of (95: 5, v/v) as mobile phase at flow rate 0.25 mL min−1. Quantification was performed with multiple reaction monitoring in positive ionization mode. The monitored transitions were set at m/z 473.24 → 419.94, 130.14 → 60.18 and 340.27 → 116.07 for linagliptin, metformin and alogliptin (internal standard), respectively. The method was validated according to FDA guidelines. The method showed excellent linearity over concentration ranges 0.25–10 and 25–2000 ng mL−1 for linagliptin and metformin, respectively. The validated HPLC‐MS/MS method was successfully applied to pharmacokinetic study of linagliptin and metformin in healthy volunteers after oral administration of Jentadueto® tablets.

Different resolution techniques for management of overlapped spectra: Application for the determination of novel co-formulated hypoglycemic drugs in their combined pharmaceutical dosage form

To maintain intensive glucose control early in the type II diabetes mellitus process, novel combinations of canagliflozin/metformin (CAG/MEF) and empagliflozin/linagliptin (EMG/LIG) offer particular treatment benefits. In this study, sensitive and precise spectrophotometric methods were developed for the determination of such hypoglycemic drug combinations in bulk powder and in pharmaceutical dosage form without prior separation. The first method was ratio difference coupled with modified isosbestic point technique where the amplitude difference between 239 and 291 nm on the ratio spectrum of CAG obtained using 4 μg/ml of MEF as divisor was used for determination of CAG. On the other hand, MEF was estimated using a modified isosbestic spectrophotometric method, where the total concentration of CAG and MEF in mixture could be calculated at 250 nm (isosbestic point) after multiplication by a correction factor. Then concentration of MEF could be calculated by subtraction. The second method was ratio subtraction coupled with extended ratio subtraction, where EMG was determined at 225 nm by subtraction of plateau values from the ratio spectrum followed by multiplication with the spectrum of 6.5 μg/ml of LIG (divisor). Then, an extension of the normal ratio subtraction method was performed in order to determine LIG at 226 nm. Linearity was obtained over 5-30, 2.5-16, 2.5-16 and 1.25-8 μg/ml for CAG, MEF, EMG and LIG, respectively. The developed methods were successfully applied for the determination of studied drugs in tablets. Validation parameters were found to be within acceptance limits, thus confirming methods accuracy and selectivity. The obtained results were statistically compared with the reported one showing no significant difference in terms of accuracy and precision. The methods could be applied for routine analysis of the cited drugs in quality control laboratories.

Simultaneous HPLC Determination of Betamethasone Esters-Containing Mixtures: Analysis of Their Topical Preparations

Topical pharmaceutical preparations containing betamethasone esters are widely prescribed for treatment of severe inflammatory skin conditions. Some betamethasone esters-containing preparations are formulated with either an antibacterial or an antifungal agent or a vitamin D3 derivative. A fast reversed-phase high-performance liquid chromatography method has been developed for the simultaneous determination of three betamethasone esters-containing binary mixtures along with the excipients of their dosage forms using clobetasone butyrate as internal standard. The first mixture was betamethasone valerate and fusidic acid (Mixture I) with chlorocresol as preservative. The second mixture was betamethasone dipropionate (BTD) and clotrimazole (Mixture II) with benzyl alcohol as preservative. The third mixture was BTD and calcipotriol monohydrate (Mixture III). Optimized chromatographic separation was achieved on a Discovery® C18 (4.6 × 250 mm, 5 μm) column, using water: acetonitrile (35:65, v/v) as mobile phase at flow rate of 1 mL/min with UV detection at 230 nm. The method was validated according to ICH guidelines. The regression coefficients were > 0.999 for all drugs. The method was successfully applied for the determination of the studied drugs in bulk, synthetic mixtures and dosage forms. The developed method is accurate, sensitive, selective and precise and can be used for routine analysis in quality control laboratories.

In vitro metabolism study of a novel P38 kinase inhibitor: in silico predictions, structure elucidation using MS/MS-I

AIM Metabolism study of PH-797804, a promising newly developed drug for treatment of chronic inflammation which inhibits P38 mitogen-activated protein kinase. MATERIALS & METHODS Susceptibility of PH-797804 to metabolism was first investigated using SMARTCyp and Xenosite web servers. Molecular docking of the drug into CYP3A4 crystal structures evaluated binding interactions with active site. The predicted results were confirmed by in vitro incubation with rat S9 fraction. Metabolites of PH-797804 were identified by MS/MS. RESULTS A hydroxy metabolite and a cysteine/glutathione conjugate were detected. Computational prediction of reactive site of PH-797804 was conducted. CONCLUSION The probable cysteine/glutathione adduct is indicative of potential drug chemical reactivity with potential to damage DNA and may provide guidance to the design of analogs with minimum toxicity.