Mariaserena Dottori

Poly (L-lactic acid)/calcium-deficient nanohydroxyapatite electrospun mats for bone marrow stem cell cultures

Electrospinning of bioresorbable polymers is a promising and valuable scaffolding technique. To improve its potential applications, the addition of specific fillers has been considered. This paper reports the fabrication of electrospun poly(L-lactic acid)/Ca-deficient-hydroxyapatite (PLLA/dHAp) mats, the content of nanosized d-HAp ranged between 1 and 8 wt%. All samples consisted of micrometric and submicrometric fibers, comprising 2D voids of 8 and 13 µm for PLLA and PLLA/d-HAp mats, respectively. The surface of the electrospun fibers was characterized by an uniform distribution of nanopores. Hybrid mats loaded with 1 wt% d-HAp showed the most homogeneous microstructure, differently from the mats loaded with 4 and 8 wt% d-HAp due to the presence of microagglomerates. The viscoelastic properties of PLLA/d-HAp hybrids were characterized by a decreasing trend of the storage modulus with increases in the nanofiller content. The microstructure, viscoelastic behavior, and cytocompatibility were investigated using murine bone marrow mesenchymal stem cells. On the basis of the biological data, the electrospun PLLA and PLLA/d-HAp mats can be regarded as potential scaffolds for bone marrow mesenchymal stem cells culture.

Novel poly(L-lactide) PLLA/SWNTs nanocomposites for biomedical applications: material characterization and biocompatibility evaluation.

Poly(L-lactide) (PLLA)/single-walled carbon nanotubes (SWNTs) nanocomposite films were produced using the solvent casting method, and morphological, thermal and mechanical properties were investigated. Biocompatibility was evaluated by using human bone cells, performing adhesion and proliferation studies. The role of single-walled nanotube incorporation and functionalization on PLLA bio-polymers was investigated. Pristine (SWNTs) and carboxylated (SWNTs–COOH) carbon nanotubes were considered in order to control the interaction between PLLA and nanotubes. SWNTs and SWNTs–COOH showed a good dispersion in the polymer matrix and improved the PLLA crystallinity. Thermal, morphological and dynamic-mechanical analyses revealed that carboxylic groups on the tube sidewalls increased compatibility between PLLA and nanostructures. Mechanical properties demonstrated an enhancement related to introduction and functionalization of carbon nanotubes. Biological investigations showed osteoblasts cultured on PLLA/SWNTs–COOH nanocomposites has higher cell adhesion and proliferation than osteoblasts cultured on PLLA and PLLA/SWNTs nanocomposites. These studies suggest that combination of biodegradable polymers and SWNTs opens a new perspective in the self-assembly of nanomaterials and nanodevices for biomedical applications with tunable properties.

Microstructure and cytocompatibility of electrospun nanocomposites based on poly(epsilon-caprolactone) and carbon nanostructures.

Carbon nanostructures (CNSs) are attractive and promising nanomaterials for the next generation of tissue engineering scaffolds, especially in neural prosthesis. Optimizing scaffold vascularization may be an important strategy to promote the repair of damaged brain tissue. In this context, the idea was to evaluate the cell response of electrospun nanohybrid scaffolds loaded with CNSs. Fibrous composites based on poly(ɛ-caprolactone) (PCL) and CNSs were fabricated by means of electrospinning technique. High-purity carbon nanofibers (CNFs) and single-wall carbon nanotubes (SWNTs) were studied. A detailed microstructural characterization was performed to evaluate the most favorable experimental conditions for the realization of fibrous PCL/CNS fabrics. Electrospun mats comprised of rather uniform and homogeneous submicrometric fibers were obtained starting from 1:1 v/v mixture of tetrahydrofuran (THF) and N,N dimethylformamide (DMF). In vitro cytocompatibility tests were performed using rat cerebro-microvascular endothelial cells (CECs). Acquired results showed an increased cell viability for PCL/CNS nanocomposites, suggesting these materials as a suitable environment for endothelial cells. These results are indicative of the promising potential of CNS-based nanocomposites in biomedical devices for tissue engineering applications where endothelial functional properties are required.