Marie-Christine Durrieu

Differentiation of pre-osteoblast cells on poly(ethylene terephthalate) grafted with RGD and/or BMPs mimetic peptides

The bone morphogenetic proteins (BMPs) are cytokines of the transforming growth factor beta family. Some BMPs such as BMP-2, BMP-7 and BMP-9 play a major role in the bone and cartilage formation. The BMP peptides corresponding to residues 73-92, 89-117, and 68-87 of BMP-2, BMP-7 and BMP-9 respectively as well as adhesion peptides (GRGDSPC) were grafted onto polyethylene terephthatalate (PET) surfaces. We evaluated the state of differentiation of pre-osteoblastic cells. The behavior of these cells on various functionalized surfaces highlighted the activity of the mimetic peptides immobilized on surfaces. The induced cells (observed in the case of surfaces grafted with BMP-2, 7 or 9 mimetic peptides and GRGDSPC peptides) were characterized on several levels. First of all, we focused on the evaluation of the osteoblastic markers such as the transcriptional factor Runx2, which is a critical regulator of osteoblastic differentiation. Secondly, the results obtained showed that these induced cells take a different morphology compared to the cells in a state of proliferation or in a state of extracellular matrix production. Induced cells were characterized by an increased thickness compared to non-induced cells. Thus, our studies prove a direct correlation between cell morphology and state of induction. Thereafter, we focused on characterizing the extracellular matrix formed by the cells on various surfaces. The extracellular matrix thickness was more significant in the case of surfaces grafted with mimetic peptides of the BMP-2, 7 or 9 and GRGDSPC peptides which once again proves their activity when immobilized on material surface. These results demonstrate that GRGDSPC and BMPs peptides, grafted to PET surface, act to enhance osteogenic differentiation and mineralization of pre-osteoblastic cells. These findings are potentially useful in developing engineered biomaterials for bone regeneration.

Effect of BMP-2 from matrices of different stiffnesses for the modulation of stem cell fate.

Stem cells cultured on extracellular matrix (ECM) with different stiffnesses have been shown to engage into different lineage commitments. However, in vivo, the components of the ECM are known to bind and strongly interact with growth factors. The effect, on the stem cell fate, of the cooperation between the mechanical properties and the growth factor in the same microenvironment has not yet been investigated. Here, we propose a protocol for mimicking this stem cell microenvironment with an in vitro system. This system consists in grafting (without using a spacer) biomolecules that contain N-termini groups onto hydrogel (poly(acrylamide-co-acrylic acid)) surfaces of various stiffnesses ranging from 0.5 to 70 kPa. First, we demonstrate that the commitment of mesenchymal stem cell populations changes in response to the substrates rigidity, with myogenic differentiation occurring at 13-17 kPa and osteogenic differentiation at 45-49 kPa. Chemical grafting of soft and stiff matrices with an osteogenic factor (BMP-2(mimetic peptide)) results only in osteogenic differentiation. Also, when grafted on even softer gels (0.5-3.5 kPa), the BMP-2(mimetic peptide) had no effect on the stem cell differentiation. We prove that correct organization of F-actin cytoskeleton due to the mechanical properties of the microenvironment is necessary for BMP-induced smad1/5/8 phosphorylation and nuclear translocation. These results suggest that stem cell differentiation is dictated mechanically, but in the presence of a biochemical factor, the effect of the mechanical factor on stem cell commitment is modified. This can explain the diversity of stem cell behaviors in vivo where different growth factors are sequestrated on the ECM.

Altered nanofeature size dictates stem cell differentiation

The differentiation of stem cells can be modulated by physical factors such as the micro- and nano-topography of the extracellular matrix. One important goal in stem cell research is to understand the concept that directs differentiation into a specific cell lineage in the nanoscale environment. Here, we demonstrate that such paths exist by controlling only the micro- and nano-topography of polymer surfaces. Altering the depth (on a nanometric scale) of micro-patterned surface structures allowed increased adhesion of human mesenchymal stem cells (hMSCs) with specific differentiation into osteoblasts, in the absence of osteogenic medium. Small (10 nm) depth patterns promoted cell adhesion without noticeable differentiation, whereas larger depth patterns (100 nm) elicited a collective cell organization, which induced selective differentiation into osteoblast-like cells. This latter response was dictated by stress through focal-adhesion-induced reorganization of F-actin filaments. The results have significant implications for understanding the architectural effects of the in vivo microenvironment and also for the therapeutic use of stem cells.

Influence of nanohelical shape and periodicity on stem cell fate.

Microenvironments such as protein composition, physical features, geometry, and elasticity play important roles in stem cell lineage specification. The components of the extracellular matrix are known to subsequently assemble into fibrillar networks in vivo with defined periodicity. However, the effect of the most critical parameter, which involves the periodicity of these fibrillar networks, on the stem cell fate is not yet investigated. Here, we show the effect of synthetic fibrillar networks patterned with nanometric periodicities, using bottom-up approaches, on the response of stem cells. We have used helical organic nanoribbons based on self-assemblies of Gemini-type amphiphiles to access chiral silica nanoribbons with two different shapes and periodicities (twisted ribbons and helical ribbons) from the same native self-assembled organic nanostructure. We demonstrate the covalent grafting of these silica nanoribbons onto activated glass substrates and the influence of this programmed isotropically oriented matrix to direct the commitment of human mesenchymal stem cells (hMSCs) into osteoblast lineage in vitro, free of osteogenic-inducing media. The specific periodicity of 63 nm (±5 nm) with helical ribbon shape induces specific cell adhesion through the fibrillar focal adhesion formation and leads to stem cell commitment into osteoblast lineage. In contrast, the matrix of periodicity 100 nm (±15 nm) with twisted ribbon shape does not lead to osteoblast commitment. The inhibition of non-muscle myosin II with blebbistatin is sufficient to block this osteoblast commitment on helical nanoribbon matrix, demonstrating that stem cells interpret the nanohelical shape and periodicity environment physically. These results indicate that hMSCs could interpret nanohelical shape and periodicity in the same way they sense microenvironment elasticity. This provides a promising tool to promote hMSC osteogenic capacity, which can be exploited in a 3D scaffold for bone tissue engineering.

pH-controlled delivery of gentamicin sulfate from orthopedic devices preventing nosocomial infections

Since the beginning of the 1970s, controlled release technology has witnessed great advancement, and motivated numerous researchers in materials science. These systems overcome the drawbacks of traditional drug dosage form, and offer more effective and favorable methods to optimize drug delivery in optimum dose to specific sites or to prolong delivery duration. This paper deals with the synthesis of pH-controlled drug delivery systems for bone implant, allowing the local release of gentamicin sulfate (GS), an antibiotic commonly used to prevent infections during orthopedic surgeries. We present a biomaterial synthesis allowing the controlled release of GS at the site of surgical implantation (over an adjustable period of time). In our design, spherical nanoparticles (NPs) functionalized by the chosen antibiotic (Gentamicin sulfate, GS), are chemically anchored to the biomaterial surface. A cleavage reaction of the chemical bond between NPs and GS, effected by the contact of material with a solution presenting an acidic pH (in the case of infection, there is a decrease of the physiological medium pH), induces controlled release of the bioactive molecule in its native form. In this paper, we discuss the synthesis of a bioactive titanium based biomaterial in general, and the grafting of the NPs onto the titanium surfaces in particular. We have paid particular attention to the characterization of the drug surface density and the release kinetic of the active molecule as a function of the pH. In vitro bacterial growth inhibition tests after GS delivery at acidic pH (with Staphylococcus aureus) have also been carried out in order to prove the efficiency of such biomaterials.

Geometrical microfeature cues for directing tubulogenesis of endothelial cells.

Angiogenesis, the formation of new blood vessels by sprouting from pre-existing ones, is critical for the establishment and maintenance of complex tissues. Angiogenesis is usually triggered by soluble growth factors such as VEGF. However, geometrical cues also play an important role in this process. Here we report the induction of angiogenesis solely by SVVYGLR peptide micropatterning on polymer surfaces. SVVYGLR peptide stripes were micropatterned onto polymer surfaces by photolithography to study their effects on endothelial cell (EC) behavior. Our results showed that the EC behaviors (cell spreading, orientation and migration) were significantly more guided and regulated on narrower SVVYGLR micropatterns (10 and 50 µm) than on larger stripes (100 µm). Also, EC morphogenesis into tube formation was switched on onto the smaller patterns. We illustrated that the central lumen of tubular structures can be formed by only one-to-four cells due to geometrical constraints on the micropatterns which mediated cell-substrate adhesion and generated a correct maturation of adherens junctions. In addition, sprouting of ECs and vascular networks were also induced by geometrical cues on surfaces micropatterned with SVVYGLR peptides. These micropatterned surfaces provide opportunities for mimicking angiogenesis by peptide modification instead of exogenous growth factors. The organization of ECs into tubular structures and the induction of sprouting angiogenesis are important towards the fabrication of vascularized tissues, and this work has great potential applications in tissue engineering and tissue regeneration.

Impact of RGD nanopatterns grafted onto titanium on osteoblastic cell adhesion.

This work reports on the synthesis of titanium bone implants functionalized with nanoparticles (NPs) containing Arg-Gly-Asp-Cys peptide (RGDC) and shows the adhesion behavior of cells seeded on these materials. RGDC peptides were first conjugated to a norbornenyl-poly(ethylene oxide) macromonomer (Nb-PEO). Then, functional NPs with a size of ∼300 nm and constituted of polynorbornene core surrounded by poly(ethylene oxide) shell were prepared by ring-opening metathesis polymerization in dispersed medium. The grafting density of these NPs on the titanium surface is up to 2 NPs·μm(-2) (80 pmol of RGDC per cm(-2) of NP surface). Cell adhesion was evaluated using preosteoblast cells (MC3T3-E1). Results of cells cultured for 24 h showed that materials grafted with NPs functionalized with RGDC peptides enhance specific cell adhesion and can create filopodia-like structures among NP sites by stressing the cells.

In Vitro picosecond ultrasonics in a single cell

Ultrasonics signals at frequencies 5.7±0.1 and 6.8±0.1GHz are measured in two organelles of a single vegetal cell in vitro with a picosecond ultrasonic technique. Using standard values for cell optical index, ultrasound velocities of 1.6±0.1 and 2.0±0.1μm∕ns are measured from several signals recorded in the vacuole and in the nucleus of a single Allium cepa cell, respectively. A 1μm lateral and 0.25μm depth resolution is attained.

Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces.

AIM The aim of the present work was to investigate ultrafast laser surface texturing as a surface treatment of Ti-6Al-4V alloy dental and orthopedic implants to improve osteoblastic commitment of human mesenchymal stem cells (hMSCs). MATERIALS & METHODS Surface texturing was carried out by direct writing with an Yb:KYW chirped-pulse regenerative amplification laser system with a central wavelength of 1030 nm and a pulse duration of 500 fs. The surface topography and chemical composition were investigated by scanning electron microscopy and x-ray photoelectron spectroscopy, respectively. Three types of surface textures with potential interest to improve implant osseointegration can be produced by this method: laser-induced periodic surface structures (LIPSSs); nanopillars (NPs); and microcolumns covered with LIPSSs, forming a bimodal roughness distribution. The potential of the laser treatment in improving hMSC differentiation was assessed by in vitro study of hMSCs spreading, adhesion, elongation and differentiation using epifluorescence microscopy at different times after cell seeding, after specific stainings and immunostainings. RESULTS Cell area and focal adhesion area were lower on the laser-textured surfaces than on a polished reference surface. Obviously, the laser-textured surfaces have an impact on cell shape. Osteoblastic commitment was observed independently of the surface topography after 2 weeks of cell seeding. When the cells were cultured (after 4 weeks of seeding) in osteogenic medium, LIPSS- and NP- textured surfaces enhanced matrix mineralization and bone-like nodule formation as compared with polished and microcolumn-textured surfaces. CONCLUSION The present work shows that surface nanotextures consisting of LIPSSs and NPs can, potentially, improve hMSC differentiation into an osteoblastic lineage.

Bioactive chemical nanopatterns impact human mesenchymal stem cell fate.

We present a method of preparing and characterizing nanostructured bioactive motifs using a combination of nanoimprint lithography and surface functionalization. Nanodots were fabricated on silicon surfaces and modified with a cell-adhesive RGD peptide for studies in human mesenchymal stem cell adhesion and differentiation. We report that bioactive nanostructures induce mature focal adhesions on human mesenchymal stem cells with an impact on their behavior and dynamics specifically in terms of cell spreading, cell-material contact, and cell differentiation.