Marijana Blesic

Self-aggregation of ionic liquids: micelle formation in aqueous solution

Interfacial tension (using a drop-shape analysis technique), fluorescence (of a widely used spectroscopic molecular probe, pyrene), and 1H NMR measurements were used to monitor the adsorption at the aqueous solution–air interface and self-aggregation behaviour (critical micelle concentration, CMC) of room-temperature ionic liquids (ionic liquids) of the 1-alkyl-3-methylimidazolium family of cations, [Cnmim]+, with different linear alkyl chain lengths, CnH2n+1 (½n = 1–7), and different counter-ions, namely [Cnmim]Cl (n = 2–14), [Cnmim][PF6] (n = 4 or 10), and [C10mim][NTf2]. Only [Cnmim]Cl with n > 8 unambiguously form aggregates in solution and the nature of this self-aggregation is discussed in terms of the electrostatic vs. hydrophobic contributions of the isolated cation. In contrast, the shortest chains behave, as anticipated, as simple salts. In turn, the transitional ionic liquid, [C6mim]Cl is able to develop a monolayer at the aqueous solution–air interface but shows no noticeable self-aggregation in the bulk fluid. Moreover, the micellar characteristics of the well-studied sodium dodecyl sulfate (SDS) aqueous solutions as a function of the total concentration of [Cnmim]Cl (½n = 1–7) showed a clear change in the behaviour of the mixtures [Cnmim]Cl + SDS for n ≈ 6–8, with a characteristic mixed-micelle formation for the longer and a pure salt effect for the shorter chain lengths of [Cnmim]Cl.

On the self-aggregation and fluorescence quenching aptitude of surfactant ionic liquids.

The aggregation behavior in aqueous solution of a number of ionic liquids was investigated at ambient conditions by using three techniques: fluorescence, interfacial tension, and (1)H NMR spectroscopy. For the first time, the fluorescence quenching effect has been used for the determination of critical micelle concentrations. This study focuses on the following ionic liquids: [Cnmpy]Cl (1-alkyl-3-methylpyridinium chlorides) with different linear alkyl chain lengths (n=4, 10, 12, 14, 16, or 18), [C12mpip]Br (1-dodecyl-1-methylpiperidinium bromide), [C12mpy]Br (1-dodecyl-3-methylpyridinium bromide), and [C12mpyrr]Br (1-dodecyl-1-methylpyrrolidinium bromide). Both the influence of the alkyl side-chain length and the type of ring in the cation (head) on the CMC were investigated. A comparison of the self-aggregation behavior of ionic liquids based on 1-alkyl-3-methylpyridinium and 1-alkyl-3-methylpyridinium cations is provided. It was observed that 1-alkyl-3-methylpyridinium ionic liquids could be used as quenchers for some fluorescence probes (fluorophores). As a consequence, a simple and convenient method to probe early evidence of aggregate formation was established.

New catanionic surfactants based on 1-alkyl-3-methylimidazolium alkylsulfonates, [CnH2n+1mim][CmH2m+1SO3]: mesomorphism and aggregation

Anionic and cationic alkyl-chain effects on the self-aggregation of both neat and aqueous solutions of 1-alkyl-3-methylimidazolium alkylsulfonate salts ([C(n)H(2n+1)mim][C(m)H(2m+1)SO(3)]; n = 8, 10 or 12; m = 1 and n = 4 or 8; m = 4 or 8) have been investigated. Some of these salts constitute a novel family of pure catanionic surfactants in aqueous solution. Examples of this class of materials are rare; they are distinct from both mixed cationic-anionic surfactants (obtained by mixing two salts) and gemini surfactants (with two or more amphiphilic groups bound by a covalent linker). Fluorescence spectroscopy and interfacial tension measurements have been used to determine critical micelle concentrations (CMCs), surface activity, and to compare the effects of the alkyl-substitution patterns in both the cation and anion on the surfactant properties of these salts. With relatively small methylsulfonate anions (n = 8, 10 and 12, m = 1), the salts behave as conventional single chain cationic surfactants, showing a decrease of the CMC upon increase of the alkyl chain length (n) in the cation. When the amphiphilic character is present in both the cation and anion (n = 4 and 8, m = 4 and 8), novel catanionic surfactants with CMC values lower than those of the corresponding cationic analogues, and which exhibited an unanticipated enhanced reduction of surface tension, were obtained. In addition, the thermotropic phase behaviour of [C(8)H(18)mim][C(8)H(18)SO(3)] (n = m = 8) was investigated using variable temperature X-ray scattering, polarising optical microscopy and differential scanning calorimetry; formation of a smectic liquid crystalline phase with a broad temperature range was observed.

1-Alkyl-3-methylimidazolium alkanesulfonate ionic liquids, [CnH2n+1mim][CkH2k+1SO3]: synthesis and physicochemical properties

A set of 1-alkyl-3-methylimidazolium alkanesulfonate ionic liquids, [C(n)mim][C(k)SO(3)], formed by the variation of the alkyl chain lengths both in the cation and the anion (n = 1-6, 8, or 10; k = 1-4, or 6), was synthesised, with sixteen of them being novel. The ionic liquids were characterised by (1)H and (13)C NMR spectroscopy, and mass spectrometry. Their viscosities and densities as a function of temperature, as well as melting points and decomposition temperatures, were determined. The molecular volumes, both experimental and calculated, were found to depend linearly on the sum (n + k).

Solubility of alkanes, alkanols and their fluorinated counterparts in tetraalkylphosphonium ionic liquids

We investigated the mutual solubility of mixtures of phosphonium-based ionic liquids with alkanes, alkanols, fluorinated alkanes and fluorinated alkanols. The solubilities of other solute molecules like water, formamide, 1,4-dioxane, benzene, and dimethylsulfoxide were also tested. Whenever possible, the corresponding temperature-composition (T-x) phase diagrams at atmospheric pressure were built from cloud-point temperature determinations. The influence of the size of the solute was tested with binary mixtures of trihexyl(tetradecyl)phosphonium acetate, [P(6 6 6 14)][Ac], with hexane, decane or tetradecane. The influence of the anion of the ionic liquid, namely acetate, [Ac], bis-[(trifluoromethyl)sulfonyl]imide, [Ntf(2)], trifluoromethanesulfonate, [Otf], and dicyanamide, [dca], on the solubility of the ionic liquids in hexane was also studied. For the ionic liquid [P(6 6 6 14)][Ntf(2)] the liquid-liquid phase diagrams were determined with different solutes-alkanes, perfluoroalkanes, partially fluorinated alkanes, and partially fluorinated alkanols-with the aim of analysing the solute-solvent interactions. A comparison of the phase behaviour of solutions containing phosphonium-based ionic liquids and 1-alkyl-3-methylimidazolium based ionic liquids, including a discussion of their different morphologies at a structural level, is also provided. It was found that fluorination of the aliphatic chains of organic compounds can be used as an effective way to control the solubility limits of these compounds in phosphonium- or imidazolium-based ionic liquids, both in terms of concentration and temperature.

Phase equilibria in ionic liquid-aromatic compound mixtures, including benzene fluorination effects.

This work extends the scope of previous studies on the phase behavior of mixtures of ionic liquids with benzenes or its derivatives by determining the solid-liquid and liquid-liquid phase diagrams of mixtures containing an ionic liquid and a fluorinated benzene. The systems studied include 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide plus hexafluorobenzene or 1,3,5-trifluorobenzene and 1-ethyl-3-methylimidazolium triflate or N-ethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide plus benzene. The phase diagrams exhibit different kinds of solid-liquid behavior: the (usual) occurrence of eutectic points; the (not-so-usual) presence of congruent melting points and the corresponding formation of inclusion crystals; or the observation of different ionic liquid crystalline phases (polymorphism). These different types of behavior can be controlled by temperature annealing during crystallization or by the nature of the aromatic compound and can be interpreted, at a molecular level, taking into account the structure of the crystals or liquid mixtures, together with the unique characteristics of ionic liquids, namely the dual nature of their interactions with aromatic compounds.

Solubility of fluorinated compounds in a range of ionic liquids. Cloud-point temperature dependence on composition and pressure

In this work, we explore the mutual solubility of a number of mixtures of commonly used ionic liquids (imidazolium, pyridinium, phosphonium and ammonium ionic liquids) with partially fluorinated n-alcohols (C7 to C10) or perfluoroheptane. The corresponding T–x diagrams at atmospheric pressure were measured through cloud-point temperature determinations. For some selected systems under near-critical isopleth conditions, pressure effects were also studied. The results are discussed in terms of (i) shifts in the immiscibility envelopes as the cation alkyl-chain length is changed, (ii) the nature of the cation or the anion, (iii) the increasing length of the fluorinated/alkylic moiety of the partially fluorinated alcohol, or (iv) comparisons with similar systems involving normal alcohols.

Phase Behaviour, Interactions, and Structural Studies of (Amines+Ionic Liquids) Binary Mixtures

We present a study on the phase equilibrium behaviour of binary mixtures containing two 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}imide-based ionic liquids, [C(n)mim] [NTf(2)] (n=2 and 4), mixed with diethylamine or triethylamine as a function of temperature and composition using different experimental techniques. Based on this work, two systems showing an LCST and one system with a possible hourglass shape are measured. Their phase behaviours are then correlated and predicted by using Flory-Huggins equations and the UNIQUAC method implemented in Aspen. The potential of the COSMO-RS methodology to predict the phase equilibria was also tested for the binary systems studied. However, this methodology is unable to predict the trends obtained experimentally, limiting its use for systems involving amines in ionic liquids. The liquid-state structure of the binary mixture ([C(2)mim] [NTf(2)]+diethylamine) is also investigated by molecular dynamics simulation and neutron diffraction. Finally, the absorption of gaseous ethane by the ([C(2)mim][NTf(2)]+diethylamine) binary mixture is determined and compared with that observed in the pure solvents.

A class of efficient short-chain fluorinated catanionic surfactants

There have been many attempts to find suitable replacements for fluorinated surfactants due to problems related to their bioaccumulation and resistance to biodegradation. Meeting the exceptional performances of these compounds, however, remains largely an unaccomplished challenge. Currently, a solution might be found through the synthesis of new classes of fluorinated compounds that possess reduced environmental impact by following the recommended strategies for their greener and safer design. In this article we report a novel approach by designing a family of catanionic fluorinated surfactants that shows potential for improved degradation, good water solubility, and low Krafft points. Furthermore, these surfactants exhibit excellent fluorine efficiency and effectiveness of surface tension reduction.

Tunable thermomorphism and applications of ionic liquid analogues of Girard's reagents

A series of ionic liquids based on Girards reagents was synthesised. Their tunable thermomorphic behaviour with water was demonstrated, and slight modifications in the cationic structure led to drastic changes in their water miscibility. Their phase behaviour, involving monophasic–biphasic transitions, drove a number of practical applications, including scavenging water-soluble dyes and the extraction of metals from water.