Marilyn Rayner

Characterization of starch Pickering emulsions for potential applications in topical formulations

The aim of this work has been to characterize starch based Pickering emulsions as a first step to evaluate their possible use as vehicles for topical drug delivery. A minor phase study of emulsions with high oil content has been performed. Emulsion stability against coalescence over eight weeks and after mild centrifugation treatment has been studied. The particle size, rheological properties and in vitro skin penetration of emulsions containing three different oils (Miglyol, paraffin and sheanut oil) was investigated. It was shown that it is possible to produce oil in water starched stabilised Pickering emulsions with oil content as high as 56%. Furthermore, this emulsions show good stability during storage over eight weeks and towards mild centrifugation. The particle size of the systems are only dependent on the ratio between oil and starch and for liquid oils the type of oil do not affect the particle size. The type of oil also affects the cosmetic and rheological properties of the creams but did not affect the transdermal diffusion in in vitro tests. However, it seems as if the Pickering emulsions affected the transport over the skin, as the flux was twice that of what has been previously reported for solutions.

Quinoa starch granules: a candidate for stabilising food-grade Pickering emulsions.

BACKGROUND Particle-stabilised emulsions, so-called Pickering emulsions, are known to possess many beneficial properties, including being extremely stable. Starch granules isolated from quinoa have been used as emulsion stabilising particles. The granules were intact, 1-3 µm in diameter and modified with octenyl succinic anhydride to increase their hydrophobicity. Starch granules, as opposed to most other particles used to generate Pickering emulsions, are edible, abundant and derived from natural sources. RESULTS Emulsions produced by high shear homogenisation had droplet sizes of 9-70 µm depending on the starch-to-oil ratio. Droplet size decreased with increasing starch-to-oil ratio, but was unaffected by the oil phase volume over a range of 5-33% oil (v/v). Although the drops were large and subject to creaming, their size remained unchanged over a period of 7 days. By adjusting the starch-to-oil ratio drops could be made to be buoyancy neutral to prevent creaming. Rheological characterisation indicated a gel structure with an elastic modulus in the range 200-2000 Pa depending on droplet size. CONCLUSION This work has demonstrated the successful use of starch granules to stabilise emulsions which may find applications beyond that of food, for example in cosmetics and pharmaceutical formulations.

Emulsion stabilizing capacity of intact starch granules modified by heat treatment or octenyl succinic anhydride

Starch granules are an interesting stabilizer candidate for food-grade Pickering emulsions. The stabilizing capacity of seven different intact starch granules for making oil-in-water emulsions has been the topic of this screening study. The starches were from quinoa; rice; maize; waxy varieties of rice, maize, and barley; and high-amylose maize. The starches were studied in their native state, heat treated, and modified by octenyl succinic anhydride (OSA). The effect of varying the continuous phase, both with and without salt in a phosphate buffer, was also studied. Quinoa, which had the smallest granule size, had the best capacity to stabilize oil drops, especially when the granules had been hydrophobically modified by heat treatment or by OSA. The average drop diameter (d32) in these emulsions varied from 270 to 50 μm, where decreasing drop size and less aggregation was promoted by high starch concentration and absence of salt in the system. Of all the starch varieties studied, quinoa had the best overall emulsifying capacity, and OSA modified quinoa starch in particular. Although the size of the drops was relatively large, the drops themselves were in many instances extremely stable. In the cases where the system could stabilize droplets, even when they were so large that they were visible to the naked eye, they remained stable and the measured droplet sizes after 2 years of storage were essentially unchanged from the initial droplet size. This somewhat surprising result has been attributed to the thickness of the adsorbed starch layer providing steric stabilization. The starch particle-stabilized Pickering emulsion systems studied in this work has potential practical application such as being suitable for encapsulation of ingredients in food and pharmaceutical products.

Quinoa starch granules as stabilizing particles for production of Pickering emulsions

Intact starch granules isolated from quinoa (Chenopodium quinoa Willd.) were used to stabilize emulsion drops in so-called Pickering emulsions. Miglyol 812 was used as dispersed phase and a phosphate buffer (pH7) with different salt (NaCl) concentrations was used as the continuous phase. The starch granules were hydrophobically modified to different degrees by octenyl succinic anhydride (OSA) or by dry heat treatment at 120 degrees C in order to study the effect on the resulting emulsion drop size. The degree of OSA-modification had a low to moderate impact on drop size. The highest level of modification (4.66%) showed the largest mean drop size, and lowest amount of free starch, which could be an effect of a higher degree of aggregation of the starch granules and, thereby, also the emulsion drops stabilized by them. The heat treated starch granules had a poor stabilizing ability and only the starch heated for the longest time (150 min at 120 degrees C) had a better emulsifying capacity than the un-modified native starch granules. The effect of salt concentration was rather limited. However, an increased concentration of salt slightly increased the mean drop size and the elastic modulus.

Thylakoids promote release of the satiety hormone cholecystokinin while reducing insulin in healthy humans

Objective. The effects of a promising new appetite suppressor named “thylakoids” (membrane proteins derived from spinach leaves) were examined in a single meal in man. Thylakoids inhibit the lipase/colipase hydrolysis of triacylglycerols in vitro and suppress food intake, decrease body-weight gain and raise the satiety hormone cholecystokinin (CCK) in rats, but their effects in man remain unclear. The aim of this study was to investigate whether thylakoids, when added to a test meal, affect appetite regulation and blood parameters in healthy individuals. Material and methods. In an intervention crossover study, healthy individuals of normal weight (n=11) were offered a high-fat meal with and without the addition of thylakoids. Blood samples were taken 0 (prior to meal), 30, 60, 120, 180, 240, 300 and 360 min after the start of the meal. Blood samples were analysed for satiety and hunger hormones (CCK, leptin and ghrelin), insulin and blood metabolites (glucose and free fatty acids). Results. The CCK level increased, in particular between the 120 min time-point and onwards, the ghrelin level was reduced at 120 min and leptin level increased at 360 min after intake of the thylakoid-enriched meal. The insulin level was reduced, whereas glucose concentrations were unchanged. Free fatty acids were reduced between time-point 120 min and onwards after the thylakoid meal. Conclusions. The addition of thylakoids to energy-dense food promotes satiety signals and reduces insulin response during a single meal in man.

Barrier properties of heat treated starch Pickering emulsions

HYPOTHESIS There is a recognized technological need for delivery systems encapsulating lipophilic substances in food and pharmaceutical products. Pickering emulsions can provide well-defined and highly stable systems, but may not provide good enough barrier properties. Starch granules, recently being used for Pickering stabilization, have the advantage of the ability to swell during gelatinization. Hence, this property could be used to tune and control barrier properties. EXPERIMENTS Oil-in-water Pickering emulsions stabilized by starch were subject to heat treatment at different conditions. The influence of temperature, time, and storage on emulsion drop characteristics was evaluated. In order to further evaluate the barrier properties, lipolysis using the pH-stat method was applied and the effect of starch concentration, treatment temperature, and preliminary oral conditions were also investigated. FINDINGS A better encapsulating barrier was obtained by starch swelling at the oil drop interface. This was seen as reduced lipase activity. The internal oil drop size remained intact and the starch was kept at the interface during heat treatment. The extent of swelling could be controlled by the heating conditions and had impact on the ability to prevent lipase transport through the starch barrier layer. Addition of α-amylase simulating oral digestion only had minor impact on the barrier effect.

Chemical composition, digestibility and emulsification properties of octenyl succinic esters of various starches

Octenyl succinate starches are commonly used as emulsifiers and texturizing agents in many food-systems. Rice, tapioca, corn, wheat and potato starches were modified with octenyl succinic anhydride (OSA) at 3% level. Structural characterization, molecular weight, starch digestibility and physical properties of starch granule stabilized emulsions were studied for modified starches. Modified potato (0.022) and wheat (0.018) starches had the highest and lowest degrees of OSA substitution, respectively. For all starches, amylose and amylopectin molecular mass was significantly (P<0.05) lower for OSA starches. OSA modification may have hydrolyzed the small amylose and amylopectin chains, or caused rearrangement of the starch molecules. Although the starch modification improved emulsification properties, botanical source showed more influence on this parameter. Overall, botanical source had more influence on functional properties than degree of substitution. Further studies on OSA group distribution and fine molecular structure of amylopectin and relationship with functional properties will be important.

Membrane emulsification modelling: how can we get from characterisation to design?

Abstract There has been an increasing interest in a new technique for making emulsions known as membrane emulsification, which uses a microporous membrane operated in cross-flow. The continuous phase is pumped along the membrane and sweeps away dispersed phase droplets forming from pore openings as shown in Fig. 1. The effects of process parameters in membrane emulsification have been studied, especially on a quantitative level. However, the physical mechanisms of droplet formation are still under investigation to better elucidate the roles of operating parameters, and finally model the process. This work reviews current developments and deficiencies in the modelling membrane emulsification processes.

Chloroplast thylakoids reduce glucose uptake and decrease intestinal macromolecular permeability.

Thylakoid membranes, derived from chloroplasts, have previously been shown to retard fat digestion and lower blood glucose levels after oral intake. The purpose of the present study was to investigate the effect of thylakoid membranes on the passage of methyl-glucose, dextran and ovalbumin over rat intestine in vitro using Ussing chambers. The results show that thylakoids retard the passage of each of the test molecules in a dose-dependent way. The thylakoids appear to be attached on the mucosal surface and a mechanism is suggested that the thylakoids delay the passage of the test molecules by sterical hindrance. The present results indicate that thylakoid membranes may be useful both to control intestinal absorption of glucose and to enhance the barrier function of the intestine.

The use of micro- and nanoparticles in the stabilisation of pickering-type emulsions for topical delivery.

This review describes the use of Pickering emulsions for topical drug delivery. The focus is on Pickering emulsions and how to formulate these. However, a short description of the challenges of topical drug delivery is also given. The article describes how Pickering emulsions might have other properties than traditional topical creams. It is our believe that Pickering emulsions could give added value to topical formulations as it is surfactant free, has new properties, and may alter the transport of drugs across the skin barrier.