Marisa Masumi Beppu

Preparation and characterization of ethanol-treated silk fibroin dense membranes for biomaterials application using waste silk fibers as raw material.

The possibility of producing valued devices from low cost natural resources is a subject of broad interest. The present study explores the preparation and characterization of silk fibroin dense membranes using waste silk fibers from textile processing. Morphology, crystallinity, thermal resistance and cytotoxicity of membranes as well as the changes on the secondary structure of silk fibroin were analyzed after undergoing treatment with ethanol. Membranes presented amorphous patterns as determined via X-ray diffraction. The secondary structure of silk fibroin on dense membranes was either random coil (silk I) or beta-sheet (silk II), before and after ethanol treatment, respectively. The sterilized membranes presented no cytotoxicity to endothelial cells during in vitro assays. This fact stresses the material potential to be used in the fabrication of biomaterials, as coatings of cardiovascular devices and as membranes for wound dressing or drug delivery systems.

Layer-by-Layer Deposited Chitosan/Silk Fibroin Thin Films with Anisotropic Nanofiber Alignment

Chitosan/silk fibroin multilayer thin films were assembled using layer-by-layer deposition. The resultant multilayer films contained nanofibers aligned parallel to the dipping direction. Fiber deposition and orientation was enabled uniquely by a judicious choice of solvent and drying conditions and layer-by-layer assembly with chitosan. The deposition of oriented nanofibers was found to be the result of a unique combination of layer-by-layer and Langmuir-Blodgett type processing. Fiber orientation was confirmed by fast Fourier transform (FFT) analysis of optical micrographs and atomic force microscopy (AFM). Bidirectional fiber alignment was realized by rotating the substrate between multilayer deposition steps. Infrared spectroscopy revealed that the silk fibroin adopted the silk II secondary structure in the deposited films. We anticipate that these anisotropic films are able to combine the biocompatibility of a natural polymer system with the mechanical strength of SF, two properties useful in many biological applications including scaffolds suitable for guiding cell attachment and spreading.

Bioactive Polyelectrolyte Multilayers: Hyaluronic Acid Mediated B Lymphocyte Adhesion

A strategy was developed to produce thin, biopolymer-based polyelectrolyte multilayer films, based on hyaluronic acid and chitosan, that are able to effectively bind B lymphocytes. These films explore CD44-hyaluronate interactions and provide a method to make surface-bound B cell arrays without the need for nonselective covalent chemistry. The rational design of these films using solution deposition variables, such as ionic strength and pH, allows one to maximize and fine tune this binding efficiency ex vivo. This work suggests two important conditions for successfully attaching B cells to hyaluronate-containing polyelectrolyte multilayer films: (1) hyaluronic acid is required for the proposed CD44-mediated binding mechanism, and (2) hyaluronic acid deposition conditions that favor loops and tails, such as low pH and with added salt, result in more available CD44 binding ligands and higher cell binding efficiency. Chitosan-terminated films prepared without NaCl in the deposition solutions and hyaluronic acid-terminated films prepared with salt, both under pH 3.0 assembly conditions, presented a similar high lymphocyte binding efficiency. In the former case, however, the binding strength was weaker due to a significant electrostatic contribution to the binding. Bioactive polyelectrolyte multilayers for selective binding of lymphocytes hold great promise in fields ranging from cell-based biosensors to immune system engineering.

Characterization and evaluation of copper and nickel biosorption on acidic algae Sargassum Filipendula

The marine algae Sargassum filipendula was collected from Sao Paulo seashore (Brazil) and submitted to treatment with acid. The biosorption mechanisms of Cu2+ and Ni2+ ions onto acidic algae Sargassum filipendula were examined using various analytical techniques: Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and potentiometric titration (pHZPC). The effect of acidic treatment on algae by hydrochloric acid (pH 2.0, 3.0, 4.0 and 5.0) was evaluated for Cu2+ and Ni2+ adsorption. Alginate was extracted from raw algae and the two types of acids present in the biomass (β-D-mannuronic (M) and α-L-guluronic (G) acid) were characterized by 13C NMR. The M/G ratio was found to be 0.50. According to the pHZPC analysis, at a pH higher than 5.5 the acidified algae surface presents a negative charge. The FT-IR analyses showed that the main chemical groups involved in the biosorption were carboxylic, alcoholic, sulfonate and amino groups.

Blood protein adsorption on sulfonated chitosan and κ-carrageenan films.

Many strategies have been reported to improve compatibility of biopolymers using chemical and physical modifications. One possibility is the introduction of sulfonate groups (R-SO3(-)) in the chitosan chain. Another biopolymer with similar characteristics to those of heparin is κ-carrageenan. This study proposed to investigate the application of these two polymers, based on their potential for globular protein adsorption (BSA and fibrinogen). Polymeric films of chitosan and κ-carrageenan were prepared; all films were characterized by elemental analyses, FTIR, XPS and SEM. Characterization techniques showed that the chitosan chain was modified and confirmed the existence of sulfonate groups, as well as in the κ-carrageenan chain, indicating surfaces with similar chemical properties to those of heparin. The effect of charge density was observed for each adsorption condition (BSA at pH 5.0 and 7.4). A more pronounced adsorption rate was observed at pH 5.0 than at pH 7.4 and equilibrium adsorption was achieved, in both cases, after approximately 20 min. The equilibrium data indicate a lower adsorption rate for the sulfonated chitosan film, in comparison to the other films. These results confirm the potential of modified chitosan for use in applications in which globular protein adsorption should be avoided.

Mechanical and Biological Performances of New Scaffolds Made of Collagen Hydrogels and Fibroin Microfibers for Vascular Tissue Engineering

A microstructured composite material made of collagen hydrogel (matrix) and silk fibroin microfibers (randomly oriented reinforcing fibers) is investigated in order to conjugate the mechanical resistance of fibroin with the suitable biological performance of collagen to design new scaffolds for vascular tissue engineering. Results show that fibroin microfibers and collagen fibrils have suitable interfacial adhesion, and the scaffold exhibits improved mechanical properties if compared with a pure collagen hydrogel. Furthermore, the overall biological performance is improved.

Effect of Freezing Methods on the Properties of Lyophilized Porous Silk Fibroin Membranes

Silk fibroin is a fibrous protein that has been extensively studied for application in the biomedical field, and has been used as a scaffold for bone tissue engineering. Biomaterials made of proteins are prone to physical and chemical degradation during storage; lyophilization, a drying method that consists of freezing and drying steps, is known to promote minimal changes in structure and biological activity of biomaterials. This study evaluates the effect of freezing methods on the properties of lyophilized porous silk fibroin membranes. The membranes were obtained from silk fibroin solution, frozen in liquid nitrogen or ultrafreezer, lyophilized, and then characterized by XRD, FTIR, TGA, DSC and SEM. Although the membranes presented similar physical, chemical and microstructural characteristics, quench freezing with liquid nitrogen, followed by lyophilization, promoted collapse of the membranes, while slow cooling performed by ultrafreezer preserved membrane integrity.

The role of dialysis and freezing on structural conformation, thermal properties and morphology of silk fibroin hydrogels

Silk fibroin has been widely explored for many biomedical applications, due to its biocompatibility and biodegradability. The aim of this work was to study the role of dialysis and freezing on structural conformation, thermal properties and morphology of silk fibroin hydrogels. Hydrogels were prepared after 3 and 7 days of dialysis and the effect of freezing was analyzed. For that purpose, a part of the fibroin hydrogels underwent freezing at -20 °C for 24 h, followed by lyophilization and the rest of the hydrogels were kept at 8 °C for 24 h, with further lyophilization. The fibroin hydrogels were characterized by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). Measurements by XRD and FTIR indicated that silk I and silk II structures were present in the fibroin hydrogels and that the secondary structure of fibroin is transformed mostly to β-sheet during the gelation process. Thermal analysis indicated that fibroin hydrogels are thermally stable with the degradation peak at around 330–340 °C. SEM micrographs showed porous structures and the fibroin hydrogels subjected to freezing presented a much larger pore size. Results indicate that the dialysis time and freezing did not alter the material crystallinity, conformation or thermal behavior; however, hydrogel microstructure was strongly affected by dialysis time and freezing, showing controlled pores size. This study provides fundamental knowledge on silk fibroin hydrogels preparation and properties and the studied hydrogels are promising to be used in the biomaterial field.

Effects of sterilization methods on the physical, chemical, and biological properties of silk fibroin membranes.

Silk fibroin has been widely explored for many biomedical applications, due to its biocompatibility and biodegradability. Sterilization is a fundamental step in biomaterials processing and it must not jeopardize the functionality of medical devices. The aim of this study was to analyze the influence of different sterilization methods in the physical, chemical, and biological characteristics of dense and porous silk fibroin membranes. Silk fibroin membranes were treated by several procedures: immersion in 70% ethanol solution, ultraviolet radiation, autoclave, ethylene oxide, and gamma radiation, and were analyzed by scanning electron microscopy, Fourier-transformed infrared spectroscopy (FTIR), X-ray diffraction, tensile strength and in vitro cytotoxicity to Chinese hamster ovary cells. The results indicated that the sterilization methods did not cause perceivable morphological changes in the membranes and the membranes were not toxic to cells. The sterilization methods that used organic solvent or an increased humidity and/or temperature (70% ethanol, autoclave, and ethylene oxide) increased the silk II content in the membranes: the dense membranes became more brittle, while the porous membranes showed increased strength at break. Membranes that underwent sterilization by UV and gamma radiation presented properties similar to the nonsterilized membranes, mainly for tensile strength and FTIR results.

Natural and prosthetic heart valve calcification: morphology and chemical composition characterization.

Calcification is the most common cause of damage and subsequent failure of heart valves. Although it is a common phenomenon, little is known about it, and less about the inorganic phase obtained from this type of calcification. This article describes the scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy and Ca K-edge X-ray absorption near edge structure (XANES) characterization performed in natural and bioprosthetic heart valves calcified in vivo (in comparison to in vitro-calcified valves). SEM micrographs indicated the presence of deposits of similar morphology, and XANES results indicate, at a molecular level, that the calcification mechanism of both types of valves are probably similar, resulting in formation of poorly crystalline hydroxyapatite deposits, with Ca/P ratios that increase with time, depending on the maturation state. These findings may contribute to the search for long-term efficient anticalcification treatments.