Marisa Semprini

Age and gender influence on maximal bite force and masticatory muscles thickness

The present study aimed investigate the age and gender influence on maximal molar bite force and at outlining the criteria for normal masticatory muscle development in a sample of 177 Brazilian Caucasian dentate individuals aged 7-80 years divided into five age groups: I (7-12 years), II (13-20 years), III (21-40 years), IV (41-60 years), and V (61-80 years). Except for Group V, which comprised nine women and eight men, all groups were equally divided in respect to gender (20 M/20 F). Bite force was recorded with a mouth-adapted 1000N dynamometer and the highest out of three records was regarded as the maximal bite force. The data were submitted to multivariate statistical analysis (SPSS 17.0 p<0.05). Effects of group and gender were found, but no interactions between them. The ANOVA showed significant differences between groups bilaterally. Bonferronis test showed that group I had significantly lower bite force means at both sides as compared to all groups, except group V. No differences were found between the left and right sides. In all the groups, gender was found to be a significant factor associated with maximal bite force. A global comparison including all the subjects and measures showed that the means of men were approximately 30% higher than those of women. Within-group comparisons yielded similar results in all groups. Muscle thickness was measured with a SonoSite Titan ultrasound tool using a high-resolution real-time 56mm/10MHz linear-array transducer. Three ultrasound images were obtained from the bilateral masseter and temporal muscles at rest and at maximal voluntary contraction. The means of the three measures in each clinical condition were analyzed with multivariate statistical analysis (SPSS 17.0 p<0.05). A gradual increase in thickness of the masseter and temporal muscles was found both at rest and maximal voluntary contraction for groups I to IV, whereas a decrease in muscle thickness was observed in group V. Multivariate analysis showed that in both conditions there was an effect of group and gender. The study of the development of the stomatognathic system in relation to age and gender can provide useful data for the identification of normal and impaired functioning patterns. The results of this study indicate that age and gender are associated with structural and functional alterations in the muscles of the stomatognathic system.

Use of the Fonseca's questionnaire to assess the prevalence and severity of temporomandibular disorders in brazilian dental undergraduates

This study to assessed the prevalence of signs and symptoms of temporomandibular disorders (TMD) by means of the frequency distribution of data for 218 dentistry students from a Brazilian public university using the Fonsecas questionnaire. The group consisted of 96 men and 122 women, with an average age of 20 years. Of the students, 53.21% showed some level of TMD: 35.78% mild TMD 11.93% moderate and 5.5% severe. Women were the most affected group, with 63.11% showing some level of TMD, against 40.62% of men. When considering only severe TMD, women are approximately 9 times more affected than men. Students with any level of TMD showed marked characteristics: 76.72% considered themselves tense people; 71.55% reported to clench or grind their teeth; 65.52% reported clicking of the temporomandibular joint; 64.66% reported frequent headache and 61.21% neck pain. In conclusion, clinical signs and symptoms of TMD can occur in young population and this information is of great importance for the early diagnosis of the dysfunction.

Ageing and surface EMG activity patterns of masticatory muscles

The purpose of this study was to evaluate the influence of age on the electromyographic activity of masticatory muscles. All volunteers were Brazilian, fully dentate (except for Group I - mixed dentition), Caucasian, aged 7-80, and divided into five groups: I (7-12 years), II (13-20 years), III (21-40 years), IV (41-60 years) and V (61-80 years). Except for Group V, which comprised nine women and eight men, all groups were equally divided with respect to gender (20 M/20 F). Surface electromyographic records of masticatory muscles were obtained at rest and during maximal voluntary contraction, right and left laterality, maximal jaw protrusion and maximal clenching in the intercuspal position. Statistically significant differences (P < 0.05) were found in all clinical conditions among the different age groups. Considerably different patterns of muscle activation were found across ages, with greater electromyographic activity in children and youth, and decreasing from adults to aged people.

Changes in Masticatory Performance and Quality of Life in Individuals With Chronic Periodontitis

BACKGROUND This study evaluates the effect of periodontitis on masticatory performance and quality of life index. METHODS Patients (n = 24; 23 to 76 years of age) with periodontal conditions ranging from healthy to generalized disease categorized by the alveolar bone height-to-tooth length (AB/T) ratio were separated into the following two groups: control (AB/T >50%) and test (AB/T <50%). The masticatory performance was evaluated through continuous mastication of a special device called a biocapsule. The Brazilian Oral Health Impact Profile (OHIP-14Br) questionnaire was used to assess the oral health-related quality of life. The Student t test was applied for independent samples (P <0.05) to evaluate the masticatory performance, and the Mann-Whitney U test was used to determine quality of life (P <0.05). RESULTS There was a statistically significant difference in masticatory efficiency between groups (P = 0.006). Statistically significant differences were also observed in the following parameters: 1) physical pain (P = 0.003); 2) psychologic discomfort (P = 0.008); 3) physical disability (P = 0.033); and 4) OHIP-14Br total score (P = 0.001). The control group achieved the best indicators. Both the masticatory performance and quality of life indicators showed significant correlation with the alveolar bone height. CONCLUSION The loss of periodontal supporting structures has negative effects on the masticatory performance and quality of life.

Educational material of dental anatomy applied to study the morphology of permanent teeth

The purpose of this report is to present educational material that would allow the dental student to learn to easily identify the morphologic characteristics of permanent teeth, and how they fit together (occlusion). In order to do this, macro models of permanent teeth with no attrition were carved in wax and later molded with alginate. These molds were filled with plaster, dental stone and/or cold-cured acrylic resin. The large individual dental stone tooth models were mounted on a wax base, thus obtaining maxillary and mandibular arches which were occluded. These dental arches were molded with plaster or dental stone. The authors suggest that these types of macro models allow an excellent visualization of the morphologic characteristics of permanent teeth and occlusion. Dental students are able to carve the permanent dentition in wax with great facility when they can observe macro models.

Electromyographic Activity of Masticatory Muscles in Women with Osteoporosis

The purpose of this study was to analyze the electromyographic (EMG) activity and the maximal molar bite force in women diagnosed with osteoporosis in the maxillary and mandibular regions, considering the habits and conditions that lead to development of generalized skeletal bone loss, including on face bones, can disturb the functional harmony of the stomatognathic system. Twenty-seven women with mandibular and maxillary osteoporosis and 27 healthy controls volunteered to participate in the study. A 5-channel electromyographer was used. Muscle activity was evaluated by means of EMG recordings of the masticatory musculature (masseter and temporalis muscles, bilaterally) during the following clinical conditions: rest (5 s); right and left lateral excursions (5 s); protrusion (5 s); maximal dental clenching on Parafilm (4 s) and maximal voluntary contraction (4 s). This latter clinical condition was used as the normalization factor of the sample data. It was observed that individuals with osteoporosis presented greater EMG activity when maintaining mandible posture conditions and less activity during dental clenching and when obtaining maximal molar bite force. It may be concluded that facial osteoporosis can interfere on the patterns of masticatory muscle activation and maximal bite force of the stomatognathic system.

Macroscopic and microscopic aspects of the temporomandibular joint related to its clinical implication.

In order to obtain a precise diagnosis and treatment for temporomandibular dysfunctions, it is necessary to have morphological and functional knowledge of the temporomandibular joint. Anatomic components are important to the understanding of the complexity of temporomandibular joint. Nonetheless, just as important are the anatomic relationships that this joint has with the neighboring structures. Thus, the aim of this study was to present the anatomic relationships of the temporomandibular joint in its various surfaces: external or lateral, anterior, posterior, medial, superior, and posterosuperior, considering the morphological and histological aspects. Nine human heads, fixed in formalin (10%) underwent sagittal medial section and were subsequently dissected, evidencing the anatomic components of all surfaces to be analyzed. Components of the external surface were: skin, subcutaneous tissue, lymphatic ganglia, parotid gland, superficial temporal artery, transverse facial artery, zygomatic-orbital artery, superficial temporal vein, facial and auriculotemporal nerves, masseter muscle, and pre-auricular lymphonodus. The anterior surface comprised the masseter and lateral pterygoid muscles (upper and inferior heads), pterygoid venous plexus, mandibular notch, posterior deep temporal artery, masseteric nerve, and deep posterior temporal branches. Medial surface components were: internal maxillary artery, of which middle meningeal artery was one of the closest branches to the TMJ, anterior tympanic artery, inferior alveolar, lingual, auriculotemporal, and chorda tympani nerves, which belonged to the surface posterior to the anterior wall of the auditory duct; auricolotemporal nerve, parotid gland; and petrotympanic fissure. The cerebral fossa (meninges and encephalon) belonged to the superior surface and the ear belonged to the posterosuperior surface. Histologically, the temporomandibular joint is composed by different tissues that compound the mandibular head, mandibular fossa, and articular eminence of the temporomandibular joint. It was concluded that the temporomandibular joint is a complex structure and the clinician must have the ability to formulate the diagnosis based on the understanding of morphological aspects of the structures that compose the stomatognatic system.

Comparison of retentive systems for composites used as alternatives to porcelain in fixed partial dentures

STATEMENT OF PROBLEM The bond strength between framework metals and composites, used as alternatives to porcelain, requires further study because adhesive failures can promote microleakage, discoloration, and stains in composites. PURPOSE The aim of this in vitro study was to analyze and compare the tensile strength between the base metal Ni-Cr alloys: (Wirocer and Wiron 99) and 2 composites (Artglass and Solidex) with 2 types of mechanical retention (0.4-mm and 0.6-mm beads); 2 types of chemical treatment (Siloc system and Metal Photo Primer system) and the combination of both treatments on a metal framework; to verify whether these composite systems were strong enough to be used as alternatives to porcelain. MATERIAL AND METHODS A total of 144 specimens, cylindrical metal rods (3 mm diameter x 60 mm length), were cast in Ni-Cr alloy (Wiron 99 or Wirocer), divided into 6 equal groups corresponding to 6 types of retention: airborne particle abrasion/control (A), chemical (C), mechanical with 0.4-mm (M4) and 0.6-mm beads (M6), and chemical/mechanical with 0.4-mm (CM4) and 0.6-mm beads (CM6). Composite rings formed around the rods (6.0 mm diameter X 2.0 mm thickness) of Artglass or Solidex were light polymerized in the UniXS unit (wavelength range of 320-520 nm for 540s) according to the manufacturers specifications. Specimens were invested, and their tensile strength was measured at fracture with an EMIC-MEM 2000 universal testing machine at a crosshead speed of 2.0 mm/min and 500 kgf load cell. Statistical analysis was carried out with analysis of variance and Tukeys test at significance level P=.01. RESULTS The highest mean retention values were recorded for groups CM6 (63.57 MPa) and M6 (63.05 MPa). The lowest mean retention values were recorded for groups A (30.63 MPa) and C (25.07 MPa). No significant difference was found regarding the alloys used in this study (P<.01). There was a significant difference in shear strength (P<.01) between Solidex (52.33 MPa) and Artglass (43.18 MPa). CONCLUSION Within the limitations of this study, mechanical retention with 0.6-mm beads and chemical/mechanical retention with 0.6-mm beads increased the metal-composite tensile bond strength. No significant difference was found between these 2 retention systems. Chemical and airborne particle abrasion/control retentions were statistically weaker than the other types of retention tested. The retention means corresponding to the commercial-grade Ni-Cr alloys used were statistically different. The composite Solidex showed a tensile strength mean statistically higher than Artglass. All values observed were higher than that recommended for metal-ceramic dental restorative systems (25 MPa-ISO 9693).

Application of Low-Level Laser Irradiation (LLLI) and rhBMP-2 in Critical Bone Defect of Ovariectomized Rats: Histomorphometric Evaluation

OBJECTIVES The aim of this study was to evaluate the osteogenic potential of recombinant human bone morphogenetic protein-2 (rhBMP-2) and low-level laser irradiation (LLLI), isolated or combined in critical bone defects (5 mm) in parietal bone using ovariectomized female rats as an experimental animal model. MATERIALS AND METHODS Forty-nine female Wistar rats, bilaterally ovariectomized (OVX), were divided into seven treatment groups of seven animals each: (I) laser in a single application, (II) 7 μg of pure rhBMP-2, (III) laser and 7 μg of pure rhBMP-2, (IV) 7 μg of rhBMP-2/monoolein gel, (V) laser and 7 μg of rhBMP-2/monoolein gel, (VI) laser and pure monoolein gel, and (VII) critical bone defect controls. The low-level laser source used was a gallium aluminum arsenide semiconductor diode laser device (λ = 780 nm, D = 120 J/cm(2)). RESULTS Groups II and III presented higher levels of newly formed bone than all other groups with levels of 40.57% and 40.39%, respectively (p < 0.05). The levels of newly formed bone of groups I, IV, V, and VI were similar with levels of 29.67%, 25.75%, 27.75%, and 30.64%, respectively (p > 0.05). The area of new bone formation in group VII was 20.96%, which is significantly lower than groups I, II, III, and VI. CONCLUSIONS It was concluded that pure rhBMP-2 and a single dose of laser application stimulated new bone formation, but the new bone formation area was significantly increased when only rhBMP-2 was used. Additionally, the laser application in combination with other treatments did not influence the bone formation area.

Evaluation of ocular prosthesis biofilm and anophthalmic cavity contamination after use of three cleansing solutions

In addition to an initial socket discomfort, ocular prosthesis (OP) installation may allow the adherence of fungi and/or bacteria due to the superficial characteristics of the prosthesis’ material, use of inadequate cleansing solutions and methods, or because the void located between the internal portion of the prosthesis and the anophthalmic cavity (AC) mucosa. Objective: The aim of this study was to evaluate OP biofilm formation and the level of contamination of the internal portion of the OP and the AC in 24 patients. Material and Methods: Material was collected from the AC at the beginning of the study and 15 days after cleansing of the OP with 3 cleansing solutions: a neutral liquid soap, a multiuse solution for contact lens (Complete) and 0.12% chlorhexidine (Periogard). The collected materials were sowed in Petri dishes containing selective media for aerobic and facultative microorganisms, specifically staphylococci (Hipersalt agar with egg yolk), aerobic microorganisms (Brain Heart Infusion Blood Agar), streptococci (Mitis salivarius Agar), gram-negative bacilli (MacConkey Agar) and yeasts (Chromagar CandidaTM), incubated at 35°C or 37°C and the number of colony forming units were counted. Data were analyzed statistically by ANOVA, Friedman’s test and Spearman’s correlation. Results: Aerobic microorganisms, gram-negative bacilli and S. aureus were found in the OP biofilm and in the AC. There was statistically significant difference (p<0.05) between the number of microorganisms before and after the use of the cleansing solutions. Conclusion: There was positive correlation with respect to the microorganisms present in the OP biofilm and AC for the 4 proposed treatments, indicating that the decrease of OP contamination leads to AC contamination as well.