Mark D. Thoreson

Ultra-thin ultra-smooth and low-loss silver films on a germanium wetting layer

We demonstrate a method to fabricate ultra-thin, ultra-smooth and low-loss silver (Ag) films using a very thin germanium (Ge) layer as a wetting material and a rapid post-annealing treatment. The addition of a Ge wetting layer greatly reduces the surface roughness of Ag films deposited on a glass substrate by electron-beam evaporation. The percolation threshold of Ag films and the minimal thickness of a uniformly continuous Ag film were significantly reduced using a Ge wetting layer in the fabrication. A rapid post-annealing treatment is demonstrated to reduce the loss of the ultra-thin Ag film to the ideal values allowed by the quantum size effect in smaller grains. Using the same wetting method, we have also extended our studies to ultra-smooth silver-silica lamellar composite films with ultra-thin Ag sublayers.

Loss-compensated and active hyperbolic metamaterials

We have studied the dispersion relations of multilayers of silver and a dye-doped dielectric using four methods: standard effective-medium theory (EMT), nonlocal-effect-corrected EMT, nonlinear equations based on the eigenmode method, and a spatial harmonic analysis method. We compare the validity of these methods and show that metallic losses can be greatly compensated by saturated gain. Two realizable applications are also proposed. Loss-compensated metal-dielectric multilayers that have hyperbolic dispersion relationships are beneficial for numerous applications such as subwavelength imaging and quantum optics.

Ultrathin, ultrasmooth, and low-loss silver films via wetting and annealing

We have demonstrated that a thermal annealing treatment can reduce the optical losses in ultrathin, ultrasmooth, silver films deposited on a Ge wetting layer to values as low as the bulk material value and at the same time maintain an ultrasmooth surface. The annealing effect is sensitive to the annealing temperature and time, both of which should be carefully controlled. This annealing treatment is also effective for Ag–SiO2 multilayer composite films.

Fabrication and realistic modeling of three-dimensional metal-dielectric composites

Historically, the methods used to describe the electromagnetic response of random, three-dimensional (3D), metal-dielectric composites (MDCs) have been limited to approximations such as effective-medium theories that employ easily-obtained, macroscopic parameters. Full-wave numerical simulations such as finite-difference time domain (FDTD) calculations are difficult for random MDCs due to the fact that the nanoscale geometry of a random composite is generally difficult to ascertain after fabrication. We have developed a fabrication method for creating semicontinuous metal films with arbitrary thicknesses and a modeling technique for such films using realistic geometries. We extended our two-dimensional simulation method to obtain realistic geometries of 3D MDC samples, and we obtained the detailed near- and far-field electromagnetic responses of such composites using FDTD calculations. Our simulation results agree quantitatively well with the experimentally measured far-field spectra of the real samples.

Translation of nanoantenna hot spots by a metal-dielectric composite superlens

We employ numerical simulations to show that highly localized, enhanced electromagnetic fields, also known as “hot spots,” produced by a periodic array of silver nanoantennas can be spatially translated to the other side of a metal-dielectric composite superlens. The proposed translation of the hot spots enables surface-enhanced optical spectroscopy without the undesirable contact of molecules with metal, and thus it broadens and reinforces the potential applications of sensing based on field-enhanced fluorescence and surface-enhanced Raman scattering.

Semicontinuous silver films for protein sensing with SERS

High SERS sensitivity for protein detection has been accomplished with semicontinuous silver films. Specifically, an insulin surface density as low as 80 fmol/mm2 and 25 amol in a probed area has been readily detected.

Studies of plasmonic hot-spot translation by a metal-dielectric layered superlens

We have studied the ability of a lamellar near-field superlens to transfer an enhanced electromagnetic field to the far side of the lens. In this work, we have experimentally and numerically investigated superlensing in the visible range. By using the resonant hot-spot field enhancements from optical nanoantennas as sources, we investigated the translation of these sources to the far side of a layered silver-silica superlens operating in the canalization regime. Using near-field scanning optical microscopy (NSOM), we have observed evidence of superlens-enabled enhanced-field translation at a wavelength of about 680 nm. Specifically, we discuss our recent experimental and simulation results on the translation of hot spots using a silver-silica layered superlens design. We compare the experimental results with our numerical simulations and discuss the perspectives and limitations of our approach.

Photomodification of Semicontinuous Silver Films with ps Pulses -- New Spectrum-Structure Optimization Technique

Semicontinuous silver films were photomodified with picosecond laser operating at 10.6µm. Slow spectral and structural changes were obtained. This technique allows the creation of filters for mid-IR wavelengths and optimization of films for sensing applications.

Plasmonic hybrid nanostructure with controlled interaction strength

In this report we discuss the influence of plasmon excitations in a silver island film on the fluorescence of photosynthetic complex, peridinin-chlorophyll-protein (PCP). Control of the separation between these two components is obtained by fabricating a wedge layer of silica across the substrate, with a thickness from 0 to 46 nm. Continuous variation of the silica thickness allows for gradual change of interaction strength between plasmon excitations in the metallic film and the excited states of pigments comprising photosynthetic complexes. While the largest separation between the silver film and photosynthetic complexes results in fluorescence featuring a mono-exponential decay and relatively narrow distribution of intensities, the PCP complexes placed on thinner silica spacers show biexponential fluorescence decay and significantly broader distribution of total fluorescence intensities. This broad distribution is a signature of stronger sensitivity of fluorescence enhancement upon actual parameters of a hybrid nanostructure. By gradual change of the silica spacer thickness we are able to reproduce classical distance dependence of fluorescence intensity in plasmonic hybrid nanostructures on ensemble level. Experiments carried out for different excitation wavelengths indicate that the interaction is stronger for excitations resonant with plasmon absorption in the metallic layer.

A plasmonic hybrid nanostructure with controlled interaction strength

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP