Marko Loparic

The nanomechanical signature of breast cancer.

Cancer initiation and progression follow complex molecular and structural changes in the extracellular matrix and cellular architecture of living tissue. However, it remains poorly understood how the transformation from health to malignancy alters the mechanical properties of cells within the tumour microenvironment. Here, we show using an indentation-type atomic force microscope (IT-AFM) that unadulterated human breast biopsies display distinct stiffness profiles. Correlative stiffness maps obtained on normal and benign tissues show uniform stiffness profiles that are characterized by a single distinct peak. In contrast, malignant tissues have a broad distribution resulting from tissue heterogeneity, with a prominent low-stiffness peak representative of cancer cells. Similar findings are seen in specific stages of breast cancer in MMTV-PyMT transgenic mice. Further evidence obtained from the lungs of mice with late-stage tumours shows that migration and metastatic spreading is correlated to the low stiffness of hypoxia-associated cancer cells. Overall, nanomechanical profiling by IT-AFM provides quantitative indicators in the clinical diagnostics of breast cancer with translational significance.

Micro- and Nanomechanical Analysis of Articular Cartilage by Indentation-Type Atomic Force Microscopy: Validation with a Gel-Microfiber Composite

As documented previously, articular cartilage exhibits a scale-dependent dynamic stiffness when probed by indentation-type atomic force microscopy (IT-AFM). In this study, a micrometer-size spherical tip revealed an unimodal stiffness distribution (which we refer to as microstiffness), whereas probing articular cartilage with a nanometer-size pyramidal tip resulted in a bimodal nanostiffness distribution. We concluded that indentation of the cartilages soft proteoglycan (PG) gel gave rise to the lower nanostiffness peak, whereas deformation of its collagen fibrils yielded the higher nanostiffness peak. To test our hypothesis, we produced a gel-microfiber composite consisting of a chondroitin sulfate-containing agarose gel and a fibrillar poly(ethylene glycol)-terephthalate/poly(butylene)-terephthalate block copolymer. In striking analogy to articular cartilage, the microstiffness distribution of the synthetic composite was unimodal, whereas its nanostiffness exhibited a bimodal distribution. Also, similar to the case with cartilage, addition of the negatively charged chondroitin sulfate rendered the gel-microfiber composites water content responsive to salt. When the ionic strength of the surrounding buffer solution increased from 0.15 to 2 M NaCl, the cartilages microstiffness increased by 21%, whereas that of the synthetic biomaterial went up by 31%. When the nanostiffness was measured after the ionic strength was raised by the same amount, the cartilages lower peak increased by 28%, whereas that of the synthetic biomaterial went up by 34%. Of interest, the higher peak values remained unchanged for both materials. Taken together, these results demonstrate that the nanoscale lower peak is a measure of the soft PG gel, and the nanoscale higher peak measures collagen fibril stiffness. In contrast, the micrometer-scale measurements fail to resolve separate stiffness values for the PG and collagen fibril moieties. Therefore, we propose to use nanostiffness as a new biomarker to analyze structure-function relationships in normal, diseased, and engineered cartilage.

Articular cartilage repair by genetically modified bone marrow aspirate in sheep

Bone marrow presents an attractive option for the treatment of articular cartilage defects as it is readily accessible, it contains mesenchymal progenitor cells that can undergo chondrogenic differentiation and, once coagulated, it provides a natural scaffold that contains the cells within the defect. This study was performed to test whether an abbreviated ex vivo protocol using vector-laden, coagulated bone marrow aspirates for gene delivery to cartilage defects may be feasible for clinical application. Ovine autologous bone marrow was transduced with adenoviral vectors containing cDNA for green fluorescent protein or transforming growth factor (TGF)-β1. The marrow was allowed to clot forming a gene plug and implanted into partial-thickness defects created on the medial condyle. At 6 months, the quality of articular cartilage repair was evaluated using histological, biochemical and biomechanical parameters. Assessment of repair showed that the groups treated with constructs transplantation contained more cartilage-like tissue than untreated controls. Improved cartilage repair was observed in groups treated with unmodified bone marrow plugs and Ad.TGF-β1-transduced plugs, but the repaired tissue from TGF-treated defects showed significantly higher amounts of collagen II (P<0.001). The results confirmed that the proposed method is fairly straightforward technique for application in clinical settings. Genetically modified bone marrow clots are sufficient to facilitate articular cartilage repair of partial-thickness defects in vivo. Further studies should focus on selection of transgene combinations that promote more natural healing.

Anabolic and catabolic responses of human articular chondrocytes to varying oxygen percentages

IntroductionOxygen is a critical parameter proposed to modulate the functions of chondrocytes ex-vivo as well as in damaged joints. This article investigates the effect of low (more physiological) oxygen percentage on the biosynthetic and catabolic activity of human articular chondrocytes (HAC) at different phases of in vitro culture.MethodsHAC expanded in monolayer were cultured in pellets for two weeks (Phase I) or up to an additional two weeks (Phase II). In each Phase, cells were exposed to 19% or 5% oxygen. Resulting tissues and culture media were assessed to determine amounts of produced/released proteoglycans and collagens, metalloproteinases (MMPs), collagen degradation products and collagen fibril organization using biochemical, (immuno)-histochemical, gene expression and scanning electron microscopy analyses. In specific experiments, the hypoxia-inducible factor-1α (HIF-1α) inhibitor cadmium chloride was supplemented in the culture medium to assess the involvement of this pathway.ResultsIndependent from the oxygen percentage during expansion, HAC cultured at 5% O2 (vs 19% O2) during Phase I accumulated higher amounts of glycosaminoglycans and type II collagen and expressed reduced levels of MMP-1 and MMP-13 mRNA and protein. Switching to 19% oxygen during Phase II resulted in reduced synthesis of proteoglycan and collagen, increased release of MMPs, accumulation of type II collagen fragments and higher branching of collagen fibrils. In contrast, reducing O2 during Phase II resulted in increased proteoglycan and type II collagen synthesis and reduced expression and release of MMP-13 mRNA and protein. Supplementation of cadmium chloride during differentiation culture at 5% O2 drastically reduced the up-regulation of type II collagen and the down-regulation of MMP-1 mRNA.ConclusionsThe application of more physiologic oxygen percentage during specific phases of differentiation culture enhanced the biosynthetic activity and reduced the activity of catabolic enzymes implicated in cartilage breakdown. Modulation of the oxygen percentage during HAC culture may be used to study pathophysiological events occurring in osteoarthritis and to enhance properties of in vitro engineered cartilaginous tissues.

The nanomechanical properties of rat fibroblasts are modulated by interfering with the vimentin intermediate filament system.

The contribution of the intermediate filament (IF) network to the mechanical response of cells has so far received little attention, possibly because the assembly and regulation of IFs are not as well understood as that of the actin cytoskeleton or of microtubules. The mechanical role of IFs has been mostly inferred from measurements performed on individual filaments or gels in vitro. In this study we employ atomic force microscopy (AFM) to examine the contribution of vimentin IFs to the nanomechanical properties of living cells under native conditions. To specifically target and modulate the vimentin network, Rat-2 fibroblasts were transfected with GFP-desmin variants. Cells expressing desmin variants were identified by the fluorescence microscopy extension of the AFM instrument. This allowed us to directly compare the nanomechanical response of transfected and untransfected cells at high spatial resolution by means of AFM. Depending on the variant desmin, transfectants were either softer or stiffer than untransfected fibroblasts. Expression of the non-filament forming GFP-DesL345P mutant led to a collapse of the endogenous vimentin network in the perinuclear region that was accompanied by localized stiffening. Correlative confocal microscopy indicates that the expression of desmin variants specifically targets the endogenous vimentin IF network without major rearrangements of other cytoskeletal components. By measuring functional changes caused by IF rearrangements in intact cells, we show that IFs play a crucial role in mechanical behavior not only at large deformations but also in the nanomechanical response of individual cells.

Oriented lamellar silk fibrous scaffolds to drive cartilage matrix orientation: Towards annulus fibrosus tissue engineering

A novel design of silk-based scaffold is developed using a custom-made winding machine, with fiber alignment resembling the anatomical criss-cross lamellar fibrous orientation features of the annulus fibrosus of the intervertebral disc. Crosslinking of silk fibroin fibers with chondroitin sulphate (CS) was introduced to impart superior biological functionality. The scaffolds, with or without CS, instructed alignment of expanded human chondrocytes and of the deposited extracellular matrix while supporting their chondrogenic redifferentiation. The presence of CS crosslinking could not induce statistically significant changes in the measured collagen or glycosaminoglycan content, but resulted in an increased construct stiffness. By offering the combined effect of cell/matrix alignment and chondrogenic support, the silk fibroin scaffolds developed with precise fiber orientation in lamellar form represent a suitable substrate for tissue engineering of the annulus fibrosus part of the intervertebral disc.

The role of 3D structure and protein conformation on the innate and adaptive immune responses to silk-based biomaterials

We have investigated monocyte and T cell responsiveness to silk based biomaterials of different physico-chemical characteristics. Here we report that untransformed CD14+ human monocytes respond to overnight exposure to silk fibroin-based biomaterials in tridimensional form by IL-1β and IL-6, but not IL-10 gene expression and protein production. In contrast, fibroin based materials in bidimensional form are unable to stimulate monocyte responsiveness. The elicitation of these effects critically requires contact between biomaterials and responding cells, is not sustained and becomes undetectable in longer term cultures. We also observed that NF-κβ and p38 MAP kinase play key roles in monocyte activation by silk-based biomaterials. On the other hand, fibroin based materials, irrespective of their physico-chemical characteristics appeared to be unable to induce the activation of peripheral blood T cells from healthy donors, as evaluated by the expression of activation markers and IFN-γ gene.

Nanoscale Topographic and Biomechanical Studies of the Human Internal Limiting Membrane

PURPOSE The purpose of this article was to create a nanometer scale topographic and biomechanical profile of the human internal limiting membrane (ILM) under native conditions. METHODS ILMs from the posterior pole of postmortem human eyes were prepared as flat mounts and investigated by atomic force microscopy (AFM) under physiological conditions. Structural analysis was complemented by transmission electron microscopy. RESULTS Average thickness of the fully hydrated, native ILMs was 3488 ± 460 nm. Thickness variations from 100 nm to 4326 nm characterized the fovea, which displayed a craterlike morphology. Outside the fovea, thickness distribution was uniform. Although mean ILM thicknesses were similar, standard deviation was higher on the retinal than on the vitreal side, indicating greater roughness. Average ILM stiffness was more than fivefold higher on the retinal than on the vitreal side (227 vs. 44 kPa). CONCLUSIONS A detailed topographical and nanomechanical profile of native human ILM was generated using AFM. Thickness values were significantly higher than in previous studies because of the preservation of native conditions. Both thickness and stiffness showed marked variations around the fovea but were relatively uniform outside the foveal area. Interestingly, the foveal ILM displayed a craterlike morphological appearance with four distinct layers separated by comparatively steep thickness increments. ILM stiffness was considerably higher on the retinal than on the vitreal side. AFM opens new possibilities for investigating native basement membranes under physiological and pathological conditions. Transmission electron microscopy revealed higher extracellular matrix protein density on the retinal than on the vitreal side.

Sliding motion modulates stiffness and friction coefficient at the surface of tissue engineered cartilage

OBJECTIVE Functional cartilage tissue engineering aims to generate grafts with a functional surface, similar to that of authentic cartilage. Bioreactors that stimulate cell-scaffold constructs by simulating natural joint movements hold great potential to generate cartilage with adequate surface properties. In this study two methods based on atomic force microscopy (AFM) were applied to obtain information about the quality of engineered graft surfaces. For better understanding of the molecule-function relationships, AFM was complemented with immunohistochemistry. METHODS Bovine chondrocytes were seeded into polyurethane scaffolds and subjected to dynamic compression, applied by a ceramic ball, for 1h daily [loading group 1 (LG1)]. In loading group 2 (LG2), the ball additionally oscillated over the scaffold, generating sliding surface motion. After 3 weeks, the surfaces of the engineered constructs were analyzed by friction force and indentation-type AFM (IT-AFM). Results were complemented and compared to immunohistochemical analyses. RESULTS The loading type significantly influenced the mechanical and histological outcomes. Constructs of LG2 exhibited lowest friction coefficient and highest micro- and nanostiffness. Collagen type II and aggrecan staining were readily observed in all constructs and appeared to reach deeper areas in loaded (LG1, LG2) compared to unloaded scaffolds. Lubricin was specifically detected at the top surface of LG2. CONCLUSIONS This study proposes a quantitative AFM-based functional analysis at the micrometer- and nanometer scale to evaluate the quality of cartilage surfaces. Mechanical testing (load-bearing) combined with friction analysis (gliding) can provide important information. Notably, sliding-type biomechanical stimuli may favor (re-)generation and maintenance of functional articular surfaces and support the development of mechanically competent engineered cartilage.

The Bi-Functional Organization of Human Basement Membranes

The current basement membrane (BM) model proposes a single-layered extracellular matrix (ECM) sheet that is predominantly composed of laminins, collagen IVs and proteoglycans. The present data show that BM proteins and their domains are asymmetrically organized providing human BMs with side-specific properties: A) isolated human BMs roll up in a side-specific pattern, with the epithelial side facing outward and the stromal side inward. The rolling is independent of the curvature of the tissue from which the BMs were isolated. B) The epithelial side of BMs is twice as stiff as the stromal side, and C) epithelial cells adhere to the epithelial side of BMs only. Side-selective cell adhesion was also confirmed for BMs from mice and from chick embryos. We propose that the bi-functional organization of BMs is an inherent property of BMs and helps build the basic tissue architecture of metazoans with alternating epithelial and connective tissue layers.