Markus Lackinger

Self‐Assembled Two‐Dimensional Molecular Host‐Guest Architectures From Trimesic Acid

The adsorption of 1,3,5-Benzenetricarboxylic (Trimesic) Acid (TMA) to a single crystal graphite surface has been studied under Ultra High Vacuum conditions. This work focuses on inducing a particular self-assembly structure by OMBE (Organic Molecular Beam Epitaxy), characterized by periodic non-dense-packing of the molecules. Two coexisting phases could be imaged with sub-molecular resolution by STM. Induced by directed hydrogen bonding, the organic molecules built in both cases a two-dimensional grid architecture with molecular caves. This two-dimensional host structure can accept single trimesic acid guest molecules in different positions.

Reversible phase transitions in self-assembled monolayers at the liquid-solid interface: temperature-controlled opening and closing of nanopores.

We present a variable-temperature study of monolayer self-assembly at the liquid-solid interface. By means of in situ scanning tunneling microscopy (STM), reversible phase transitions from a nanoporous low-temperature phase to a more densely packed high-temperature phase are observed. The occurrence of the phase transition and the respective transition temperature were found to depend on the type of solvent and solute concentration. Estimates of the entropic cost and enthalpic gain upon monolayer self-assembly suggest that coadsorption of solvent molecules within the cavities of the nanoporous structure renders this polymorph thermodynamically stable at low temperatures. At elevated temperatures, however, desorption of these relatively weakly bound solvent molecules destabilizes the nanoporous polymorph, and the densely packed polymorph becomes thermodynamically favored. Interestingly, the structural phase transition provides external control over the monolayer morphology and, for the system under discussion, results in an effective opening and closing of supramolecular nanopores in a two-dimensional molecular monolayer.

Thermodynamical equilibrium of binary supramolecular networks at the liquid-solid interface.

Coadsorption of two different carboxylic acids, benzenetribenzoic acid and trimesic acid, was studied at the liquid-solid interface in two different solvents (heptanoic and nonanoic acid). Independent alteration of both concentrations in binary solutions resulted in six nondensely packed monolayer phases with different structures and stoichiometries, as revealed by means of scanning tunneling microscopy (STM). All of these structures are stabilized by intermolecular hydrogen bonding between the carboxylic acid functional groups. Moreover, phase transitions of the monolayer structures, accompanied by an alteration of the size and shape of cavity voids in the 2D molecular assembly, could be achieved by in situ dilution. The emergence of the various phases could be described by a simple thermodynamic model.

Carboxylic Acids: Versatile Building Blocks and Mediators for Two-Dimensional Supramolecular Self-Assembly

Two-dimensional (2D) supramolecular self-assembly of various organic molecules at the liquid-solid interface is presented and discussed with a focus on compounds that are primarily functionalized by carboxylic groups. The main analytical tool utilized is scanning tunneling microscopy (STM), a high-resolution real-space technique capable of readily providing full crystallographic information (i.e., not only lattice parameters but also number, type, and orientation of molecules within the unit cell). Carboxylic groups are of particular interest because their combined donor and acceptor character with regard to hydrogen bonds provides reliable intermolecular cross-linking, thereby facilitating the self-assembly of well-ordered, stable monolayers. By means of various homomeric (monomolecular) and heteromeric (here, bimolecular) examples, this feature article illustrates the influence of both molecular structure and external conditions (type of solvent, concentration, etc.) on monolayer self-assembly at the liquid-solid interface. A very intriguing aspect of interfacial self-assembly is that many systems are thermodynamically controlled (i.e., adsorbed molecules at the surface are in equilibrium with molecules dissolved in the supernatant liquid phase). This offers the unique possibility not only to steer the system reliably by intensive thermodynamic parameters such as temperature and concentration but also to gain fundamental knowledge about decisive processes and steps in supramolecular self-assembly.

Isoreticular Two-Dimensional Covalent Organic Frameworks Synthesized by On-Surface Condensation of Diboronic Acids

On-surface self-condensation of 1,4-benzenediboronic acid was previously shown to yield extended surface-supported, long-range-ordered two-dimensional covalent organic frameworks (2D COFs). The most important prerequisite for obtaining high structural quality is that the polycondensation (dehydration) reaction is carried out under slightly reversible reaction conditions, i.e., in the presence of water. Only then can the subtle balance between kinetic and thermodynamic control of the polycondensation be favorably influenced, and defects that are unavoidable during growth can be corrected. In the present study we extend the previously developed straightforward preparation protocol to a variety of para-diboronic acid building blocks with the aim to tune lattice parameters and pore sizes of 2D COFs. Scanning tunneling microscopy is employed for structural characterization of the covalent networks and of noncovalently self-assembled structures that form on the surface prior to the thermally activated polycondensation reaction.

Synthesis of Well-Ordered COF Monolayers: Surface Growth of Nanocrystalline Precursors versus Direct On-Surface Polycondensation

Two different straightforward synthetic approaches are presented to fabricate long-range-ordered monolayers of a covalent organic framework (COF) on an inert, catalytically inactive graphite surface. Boronic acid condensation (dehydration) is employed as the polymerization reaction. In the first approach, the monomer is prepolymerized by a mere thermal treatment into nanocrystalline precursor COFs. The precursors are then deposited by drop-casting onto a graphite substrate and characterized by scanning tunneling microscopy (STM). While in the precursors monomers are already covalently interlinked into the final COF structure, the resulting domain size is still rather small. We show that a thermal treatment under reversible reaction conditions facilitates on-surface ripening associated with a striking increase of the domain size. Although this first approach allows studying different stages of the polymerization, the direct polymerization, that is, without the necessity of preceding reaction steps, is desirable. We demonstrate that even for a comparatively small diboronic acid monomer a direct thermally activated polymerization into extended COF monolayers is achievable.

On-surface Ullmann coupling: the influence of kinetic reaction parameters on the morphology and quality of covalent networks.

On-surface Ullmann coupling is a versatile and appropriate approach for the bottom-up fabrication of covalent organic nanostructures. In two-dimensional networks, however, the kinetically controlled and irreversible coupling leads to high defect densities and a lack of long-range order. To derive general guidelines for optimizing reaction parameters, the structural quality of 2D porous covalent networks was evaluated for different preparation protocols. For this purpose, polymerization of an iodine- and bromine-functionalized precursor was studied on Au(111) by scanning tunneling microscopy under ultrahigh vacuum conditions. By taking advantage of the vastly different temperature thresholds for C-Br and C-I cleavage, two different polymerization routes were compared - hierarchical and direct polymerization. The structural quality of the covalent networks was evaluated for different reaction parameters, such as surface temperatures, heating rates, and deposition rates by statistical analysis of STM data. Experimental results are compared to Monte Carlo simulations.

Large Area Synthesis of a Nanoporous Two-Dimensional Polymer at the Air/Water Interface

We present the synthesis of a two-dimensional polymer at the air/water interface and its nm-resolution imaging. Trigonal star, amphiphilic monomers bearing three anthraceno groups on a central triptycene core are confined at the air/water interface. Compression followed by photopolymerization on the interface provides the two-dimensional polymer. Analysis by scanning tunneling microscopy suggests that the polymer is periodic with ultrahigh pore density.

Explosives Sensing by Using Electron-Rich Supramolecular Polymers: Role of Intermolecular Hydrogen Bonding in Significant Enhancement of Sensitivity

We demonstrate here that supramolecular interactions enhance the sensitivity towards detection of electron-deficient nitro-aromatic compounds (NACs) over discrete analogues. NACs are the most commonly used explosive ingredients and are common constituents of many unexploded landmines used during World War II. In this study, we have synthesised a series of pyrene-based polycarboxylic acids along with their corresponding discrete esters. Due to the electron richness and the fluorescent behaviour of the pyrene moiety, all the compounds act as sensors for electron-deficient NACs through a fluorescence quenching mechanism. A Stern-Volmer quenching constant determination revealed that the carboxylic acids are more sensitive than the corresponding esters towards NACs in solution. The high sensitivity of the acids was attributed to supramolecular polymer formation through hydrogen bonding in the case of the acids, and the enhancement mechanism is based on an exciton energy migration upon excitation along the hydrogen-bond backbone. The presence of intermolecular hydrogen bonding in the acids in solution was established by solvent-dependent fluorescence studies and dynamic light scattering (DLS) experiments. In addition, the importance of intermolecular hydrogen bonds in solid-state sensing was further explored by scanning tunnelling microscopy (STM) experiments at the liquid-solid interface, in which structures of self-assembled monolayer of the acids and the corresponding esters were compared. The sensitivity tests revealed that these supramolecular sensors can even detect picric acid and trinitrotoluene in solution at levels as low as parts per trillion (ppt), which is much below the recommended permissible level of these constituents in drinking water.

Extended Two-Dimensional Metal–Organic Frameworks Based on Thiolate–Copper Coordination Bonds

Self-assembly and surface-mediated reactions of 1,3,5-tris(4-mercaptophenyl)benzene--a three-fold symmetric aromatic trithiol--are studied on Cu(111) by means of scanning tunneling microscopy (STM) under ultrahigh-vacuum (UHV) conditions. In order to reveal the nature of intermolecular bonds and to understand the specific role of the substrate for their formation, these studies were extended to Ag(111). Room-temperature deposition onto either substrate yields densely packed trigonal structures with similar appearance and lattice parameters. Yet, thermal annealing reveals distinct differences between both substrates: on Cu(111) moderate annealing temperatures (~150 °C) already drive the emergence of two different porous networks, whereas on Ag(111) higher annealing temperatures (up to ~300 °C) were required to induce structural changes. In the latter case only disordered structures with characteristic dimers were observed. These differences are rationalized by the contribution of the adatom gas on Cu(111) to the formation of metal-coordination bonds. Density functional theory (DFT) methods were applied to identify intermolecular bonds in both cases by means of their bond distances and geometries.