Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Markus Osterhoff is active.

Publication


Featured researches published by Markus Osterhoff.


Optics Express | 2013

Sub-5 nm hard x-ray point focusing by a combined Kirkpatrick-Baez mirror and multilayer zone plate

Florian Döring; Anna-Lena Robisch; Christian Eberl; Markus Osterhoff; A. Ruhlandt; Tobias Liese; Felix Schlenkrich; Sarah Hoffmann; Matthias Bartels; Tim Salditt; Hans-Ulrich Krebs

Compound optics such as lens systems can overcome the limitations concerning resolution, efficiency, or aberrations which fabrication constraints would impose on any single optical element. In this work we demonstrate unprecedented sub-5 nm point focusing of hard x-rays, based on the combination of a high gain Kirkpatrick-Baez (KB) mirror system and a high resolution W/Si multilayer zone plate (MZP) for ultra-short focal length f. The pre-focusing allows limiting the MZP radius to below 2 μm, compatible with the required 5 nm structure width and essentially unlimited aspect ratios, provided by enabling fabrication technology based on pulsed laser deposition (PLD) and focused ion beam (FIB).


Journal of Synchrotron Radiation | 2015

Compound focusing mirror and X-ray waveguide optics for coherent imaging and nano-diffraction

Tim Salditt; Markus Osterhoff; Martin Krenkel; Robin N. Wilke; Marius Priebe; Matthias Bartels; Sebastian Kalbfleisch; Michael Sprung

A compound optical system for coherent focusing and imaging at the nanoscale is reported, realised by high-gain fixed-curvature elliptical mirrors in combination with X-ray waveguide optics or different cleaning apertures. The key optical concepts are illustrated, as implemented at the Göttingen Instrument for Nano-Imaging with X-rays (GINIX), installed at the P10 coherence beamline of the PETRA III storage ring at DESY, Hamburg, and examples for typical applications in biological imaging are given. Characteristic beam configurations with the recently achieved values are also described, meeting the different requirements of the applications, such as spot size, coherence or bandwidth. The emphasis of this work is on the different beam shaping, filtering and characterization methods.


New Journal of Physics | 2011

Coherence filtering of x-ray waveguides: analytical and numerical approach

Markus Osterhoff; Tim Salditt

We model and describe the spatial coherence and mutual intensity of focused synchrotron radiation x-ray beams, based on ensemble averages of stochastic superpositions. Within this framework, we present numerical calculations for typical synchrotron sources with focusing mirrors, and simulate the evolution of coherence inside x-ray waveguides used for filtering by analytical and numerical methods. Simulated focus fields are compared with an experimental setup, including figure errors and vibrations.


Optics Express | 2011

Partially coherent nano-focused x-ray radiation characterized by Talbot interferometry

Tim Salditt; Sebastian Kalbfleisch; Markus Osterhoff; S. P. Krüger; Matthias Bartels; Klaus Giewekemeyer; H. Neubauer; M. Sprung

We have studied the spatial coherence properties of a nano-focused x-ray beam by grating (Talbot) interferometry in projection geometry. The beam is focused by a fixed curvature mirror system optimized for high flux density under conditions of partial coherence. The spatial coherence of the divergent exit wave emitted from the mirror focus is measured by Talbot interferometry The results are compared to numerical calculations of coherence propagation. In view of imaging applications, the magnified in-line image of a test pattern formed under conditions of partial coherence is analyzed quantitatively. Finally, additional coherence filtering by use of x-ray waveguides is demonstrated. By insertion of x-ray waveguides, the beam diameter can be reduced from typical values of 200 nm to values below 15 nm. In proportion to the reduction in the focal spot size, the numerical aperture (NA) of the projection imaging system is increased, as well as the coherence length, as quantified by grating interferometry.


Journal of Synchrotron Radiation | 2014

High-dynamic-range coherent diffractive imaging: ptychography using the mixed-mode pixel array detector

Klaus Giewekemeyer; Hugh T. Philipp; Robin N. Wilke; Andrew Aquila; Markus Osterhoff; Mark W. Tate; Katherine S. Shanks; Alexey V. Zozulya; Tim Salditt; Sol M. Gruner; Adrian P. Mancuso

The advantages of a novel wide dynamic range hard X-ray detector are demonstrated for (ptychographic) coherent X-ray diffractive imaging.


Acta Crystallographica Section A | 2014

High-flux ptychographic imaging using the new 55 µm-pixel detector `Lambda' based on the Medipix3 readout chip

Robin N. Wilke; Jesper Wallentin; Markus Osterhoff; D. Pennicard; A. Zozulya; Michael Sprung; Tim Salditt

The Large Area Medipix-Based Detector Array (Lambda) has been used in a ptychographic imaging experiment on solar-cell nanowires. By using a semi-transparent central stop, the high flux density provided by nano-focusing Kirkpatrick–Baez mirrors can be fully exploited for high-resolution phase reconstructions.


Journal of Synchrotron Radiation | 2017

Probe reconstruction for holographic X-ray imaging.

Johannes Hagemann; Anna-Lena Robisch; Markus Osterhoff; Tim Salditt

A comparison of different schemes for probe characterization of an X-ray nano-probe in a near-field imaging setting is presented.


Journal of Synchrotron Radiation | 2013

Versatility of a hard X-ray Kirkpatrick-Baez focus characterized by ptychography.

Klaus Giewekemeyer; Robin N. Wilke; Markus Osterhoff; Matthias Bartels; Sebastian Kalbfleisch; Tim Salditt

In the past decade Kirkpatrick-Baez (KB) mirrors have been established as powerful focusing systems in hard X-ray microscopy applications. Here a ptychographic characterization of the KB focus in the dedicated nano-imaging setup GINIX (Göttingen Instrument for Nano-Imaging with X-rays) at the P10 coherence beamline of the PETRA III synchrotron at HASLYLAB/DESY, Germany, is reported. More specifically, it is shown how aberrations in the KB beam, caused by imperfections in the height profile of the focusing mirrors, can be eliminated using a pinhole as a spatial filter near the focal plane. A combination of different pinhole sizes and illumination conditions of the KB setup makes the prepared optical setup well suited not only for high-resolution ptychographic coherent X-ray diffractive imaging but also for moderate-resolution/large-field-of-view propagation imaging in the divergent KB beam.


Biophysical Journal | 2016

X-Ray Micro- and Nanodiffraction Imaging on Human Mesenchymal Stem Cells and Differentiated Cells.

Marten Bernhardt; Marius Priebe; Markus Osterhoff; Carina Wollnik; Ana Diaz; Tim Salditt; Florian Rehfeldt

Adult human mesenchymal stem cells show structural rearrangements of their cytoskeletal network during mechanically induced differentiation toward various cell types. In particular, the alignment of acto-myosin fibers is cell fate-dependent and can serve as an early morphological marker of differentiation. Quantification of such nanostructures on a mesoscopic scale requires high-resolution imaging techniques. Here, we use small- angle x-ray scattering with a spot size in the micro- and submicrometer range as a high-resolution and label-free imaging technique to reveal structural details of stem cells and differentiated cell types. We include principal component analysis into an automated empirical analysis scheme that allows the local characterization of oriented structures. Results on freeze-dried samples lead to quantitative structural information for all cell lines tested: differentiated cells reveal pronounced structural orientation and a relatively intense overall diffraction signal, whereas naive human mesenchymal stem cells lack these features. Our data support the hypothesis of stem cells establishing ordered structures along their differentiation process.


X-ray Optics and Instrumentation | 2010

Hard X-Ray Focusing with Curved Reflective Multilayers

Christian Morawe; Markus Osterhoff

This paper provides a comprehensive overview on the utilization of curved graded multilayer coatings as focusing elements for hard X-rays. It concentrates on the Kirkpatrick-Baez (KB) focusing setup that has been developed at 3rd generation synchrotron sources worldwide. The optical performance of these devices is evaluated applying analytical and numerical approaches. The essential role of the multilayer coating and its meridional d-spacing gradient are discussed as well as important technological issues. Experimental data and examples of operational KB focusing devices and applications complement the work.

Collaboration


Dive into the Markus Osterhoff's collaboration.

Top Co-Authors

Avatar

Tim Salditt

University of Göttingen

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Robin N. Wilke

University of Göttingen

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar

Michael Sprung

Argonne National Laboratory

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge