Marlise Amstutz

Deciphering the assembly of the Yersinia type III secretion injectisome

The assembly of the Yersinia enterocolitica type III secretion injectisome was investigated by grafting fluorescent proteins onto several components, YscC (outer‐membrane (OM) ring), YscD (forms the inner‐membrane (IM) ring together with YscJ), YscN (ATPase), and YscQ (putative C ring). The recombinant injectisomes were functional and appeared as fluorescent spots at the cell periphery. Epistasis experiments with the hybrid alleles in an array of injectisome mutants revealed a novel outside‐in assembly order: whereas YscC formed spots in the absence of any other structural protein, formation of YscD foci required YscC, but not YscJ. We therefore propose that the assembly starts with YscC and proceeds through the connector YscD to YscJ, which was further corroborated by co‐immunoprecipitation experiments. Completion of the membrane rings allowed the subsequent assembly of cytosolic components. YscN and YscQ attached synchronously, requiring each other, the interacting proteins YscK and YscL, but no further injectisome component for their assembly. These results show that assembly is initiated by the formation of the OM ring and progresses inwards to the IM ring and, finally, to a large cytosolic complex.

YscU recognizes translocators as export substrates of the Yersinia injectisome

YscU is an essential component of the export apparatus of the Yersinia injectisome. It consists of an N‐terminal transmembrane domain and a long cytoplasmic C‐terminal domain, which undergoes auto‐cleavage at a NPTH site. Substitutions N263A and P264A prevented cleavage of YscU and abolished export of LcrV, YopB and YopD but not of Yop effectors. As a consequence, yscUN263A mutant bacteria made needles without the LcrV tip complex and they could not form translocation pores. The graft of the export signal of the effector YopE, at the N‐terminus of LcrV, restored LcrV export and assembly of the tip complex. Thus, YscU cleavage is required to acquire the conformation allowing recognition of translocators, which represent an individual category of substrates in the hierarchy of export. In addition, yscUN263A mutant bacteria exported reduced amounts of the YscP ruler and made longer needles. Increasing YscP export resulted in needles with normal size, depending on the length of the ruler. Hence, the effect of the yscUN263A mutation on needle length was the consequence of a reduced YscP export.

In situ structural analysis of the Yersinia enterocolitica injectisome

Injectisomes are multi-protein transmembrane machines allowing pathogenic bacteria to inject effector proteins into eukaryotic host cells, a process called type III secretion. Here we present the first three-dimensional structure of Yersinia enterocolitica and Shigella flexneri injectisomes in situ and the first structural analysis of the Yersinia injectisome. Unexpectedly, basal bodies of injectisomes inside the bacterial cells showed length variations of 20%. The in situ structures of the Y. enterocolitica and S. flexneri injectisomes had similar dimensions and were significantly longer than the isolated structures of related injectisomes. The crystal structure of the inner membrane injectisome component YscD appeared elongated compared to a homologous protein, and molecular dynamics simulations documented its elongation elasticity. The ring-shaped secretin YscC at the outer membrane was stretched by 30–40% in situ, compared to its isolated liposome-embedded conformation. We suggest that elasticity is critical for some two-membrane spanning protein complexes to cope with variations in the intermembrane distance. DOI: http://dx.doi.org/10.7554/eLife.00792.001

Structure of the type III secretion recognition protein YscU from Yersinia enterocolitica.

The inner-membrane protein YscU has an important role during the assembly of the Yersinia enterocolitica type III secretion injectisome. Its cytoplasmic domain (YscU(C)) recognizes translocators as individual substrates in the export hierarchy. Activation of YscU entails autocleavage at a conserved NPTH motif. Modification of this motif markedly changes the properties of YscU, including translocator export cessation and production of longer injectisome needles. We determined the crystal structures of the uncleaved variants N263A and N263D of YscU(C) at 2.05 A and 1.55 A resolution, respectively. The globular domain is found to consist of a central, mixed beta-sheet surrounded by alpha-helices. The NPTH motif forms a type II beta-turn connecting two beta-strands. NMR analysis of cleaved and uncleaved YscU(C) indicates that the global structure of the protein is retained in cleaved YscU(C). The structure of YscU(C) variant N263D reveals that wild type YscU(C) is poised for cleavage due to an optimal reaction geometry for nucleophilic attack of the scissile bond by the side chain of Asn263. In vivo analysis of N263Q and H266A/R314A YscU variants showed a phenotype that combines the absence of translocator secretion with normal needle-length control. Comparing the structure of YscU to those of related proteins reveals that the linker domain between the N-terminal transmembrane domain and the autocleavage domain can switch from an extended to a largely alpha-helical conformation, allowing for optimal positioning of the autocleavage domain during injectisome assembly.

Assembly of the Yersinia injectisome: the missing pieces

The assembly of the type III secretion injectisome culminates in the formation of the needle. In Yersinia, this step requires not only the needle subunit (YscF), but also the small components YscI, YscO, YscX and YscY. We found that these elements act after the completion of the transmembrane export apparatus. YscX and YscY co‐purified with the export apparatus protein YscV, even in the absence of any other protein. YscY‐EGFP formed fluorescent spots, suggesting its presence in multiple copies. YscO and YscX were required for export of the early substrates YscF, YscI and YscP, but were only exported themselves after the substrate specificity switch had occurred. Unlike its flagellar homologue FliJ, YscO was not required for the assembly of the ATPase YscN. Finally, we investigated the role of the small proteins in export across the inner membrane. No export of the reporter substrate YscP1–137‐PhoA into the periplasm was observed in absence of YscI, YscO or YscX, confirming that these proteins are required for export of the first substrates. In contrast, YscP1–137‐PhoA accumulated in the periplasm in the absence of YscF, suggesting that YscF is not required for the function of the export apparatus, but that its polymerization opens the secretin YscC.

Sequestering of Rac by the Yersinia Effector YopO Blocks Fcγ Receptor-mediated Phagocytosis

Pathogenic Yersinia species neutralize innate immune mechanisms by injecting type three secretion effectors into immune cells, altering cell signaling. Our study elucidates how one of these effectors, YopO, blocks phagocytosis. We demonstrate using different phagocytic models that YopO specifically blocks Rac-dependent Fcγ receptor internalization pathway but not complement receptor 3-dependent uptake, which is controlled by Rho activity. We show that YopO prevents Rac activation but does not affect Rac accumulation at the phagocytic cup. In addition, we show that plasma membrane localization and the guanine-nucleotide dissociation inhibitor (GDI)-like domain of YopO cooperate for maximal anti-phagocytosis. Although YopO has the same affinity for Rac1, Rac2, and RhoA in vitro, it selectively interacts with Rac isoforms in cells. This is due to the differential localization of the Rho family G proteins in resting cells; Rac isoforms partially exist as a GDI-free pool at the membrane of resting cells, whereas RhoA is trapped in the cytosol by RhoGDIα. We propose that YopO exploits this basic difference in localization and availability to selectively inhibit Rac-dependent phagocytosis.

Oligomeric Coiled-Coil Adhesin YadA Is a Double-Edged Sword

Yersinia adhesin A (YadA) is an essential virulence factor for the food-borne pathogens Yersinia enterocolitica and Yersinia pseudotuberculosis. Suprisingly, it is a pseudogene in Yersinia pestis. Even more intriguing, the introduction of a functional yadA gene in Y. pestis EV76 was shown to correlate with a decrease in virulence in a mouse model. Here, we report that wild type (wt) Y. enterocolitica E40, as well as YadA-deprived E40 induced the synthesis of neutrophil extracellular traps (NETs) upon contact with neutrophils, but only YadA-expressing Y. enterocolitica adhered to NETs and were killed. As binding seemed to be a prerequisite for killing, we searched for YadA-binding substrates and detected the presence of collagen within NETs. E40 bacteria expressing V98D,N99A mutant YadA with a severely reduced ability to bind collagen were found to be more resistant to killing, suggesting that collagen binding contributes significantly to sensitivity to NETs. Wt Y. pestis EV76 were resistant to killing by NETs, while recombinant EV76 expressing YadA from either Y. pseudotuberculosis or Y. enterocolitica were sensitive to killing by NETs, outlining the importance of YadA for susceptibility to NET-dependent killing. Recombinant EV76 endowed with YadA from Y. enterocolitica were also less virulent for the mouse than wt EV76, as shown before. In addition, EV76 carrying wt YadA were less virulent for the mouse than EV76 expressing YadAV98D,N99A. The observation that YadA makes Yersinia sensitive to NETs provides an explanation as for why evolution selected for the inactivation of yadA in the flea-borne Y. pestis and clarifies an old enigma. Since YadA imposes the same cost to the food-borne Yersinia but was nevertheless conserved by evolution, this observation also illustrates the duality of some virulence functions.

Yersinia enterocolitica Type III secretion injectisomes form regularly spaced clusters which incorporate new machines upon activation

Bacterial type III secretion systems or injectisomes are multiprotein complexes directly transporting bacterial effector proteins into eukaryotic host cells. To investigate the distribution of injectisomes in the bacterium and the influence of activation of the system on that distribution, we combined in vivo fluorescent imaging and high‐resolution in situ visualization of Yersinia enterocolitica injectisomes by cryo‐electron tomography. Fluorescence microscopy showed the injectisomes as regularly distributed spots around the bacterial cell. Under secreting conditions (absence of Ca2+), the intensity of single spots significantly increased compared with non‐secreting conditions (presence of Ca2+), in line with an overall up‐regulation of expression levels of all components. Single injectisomes observed by cryo‐electron tomography tended to cluster at distances less than 100 nm, suggesting that the observed fluorescent spots correspond to evenly distributed clusters of injectisomes, rather than single injectisomes. The up‐regulation of injectisome components led to an increase in the number of injectisomes per cluster rather than the formation of new clusters. We suggest that injectisome clustering may allow more effective secretion into the host cells.

A bacterial type III secretion-based protein delivery tool for broad applications in cell biology

Protein delivery based on bacterial type III secretion allows controllable injection of bacterial, viral, and human proteins into target cells, functional interaction studies, targeting of proteins to subcellular locations, and systems-level signaling analysis of a given translocated protein.