Maromu Yamada

Variations in the structure of airborne bacterial communities in a downwind area during an Asian dust (Kosa) event

Asian dust (Kosa) events transport airborne microorganisms that significantly impact biological ecosystems, human health, and ice-cloud formation in downwind areas. However, the composition and population dynamics of airborne bacteria have rarely been investigated in downwind areas during Kosa events. In this study, air samplings were sequentially performed at the top of a 10-m high building within the Kosa event arrival area (Kanazawa City, Japan) from May 1 to May 7, 2011, during a Kosa event. The particle concentrations of bacterial cells and mineral particles were ten-fold higher during the Kosa event than on non-Kosa event days. A 16S ribosomal DNA clone library prepared from the air samples primarily contained sequences from three phyla: Cyanobacteria, Firmicutes, and Alphaproteobacteria. The clones from Cyanobacteria were mainly from a marine type of Synechococcus species that was dominant during the first phase of the Kosa event and was continuously detected throughout the Kosa event. The clones from Alphaproteobacteria were mainly detected at the initial and final periods of the Kosa event, and phylogenetic analysis showed that their sequences clustered with those from a marine bacterial clade (the SAR clade) and Sphingomonas spp. During the middle of the Kosa event, the Firmicutes species Bacillus subtilis and Bacillus pumilus were predominant; these species are known to be predominant in the atmosphere above the Chinese desert, which is the source of the dust during Kosa events. The clones obtained after the Kosa event had finished were mainly from Bacillus megaterium, which is thought to originate from local terrestrial areas. Our results suggest that airborne bacterial communities at the ground level in areas affected by Kosa events change their species compositions during a Kosa event toward those containing terrestrial and pelagic bacteria transported from the Sea of Japan and the continental area of China by the Kosa event.

Performance evaluation of newly developed portable aerosol sizers used for nanomaterial aerosol measurements.

Nanomaterial particles exhibit a wide range of sizes through the formation of agglomerates/aggregates. To assess nanomaterial exposure in the workplace, accurate measurements of particle concentration and size distribution are needed. In this study, we evaluated the performance of two recently commercialized instruments: a portable scanning mobility particle sizer (SMPS) (NanoScan, TSI Inc.), which measures particle size distribution between 10 and 420 nm and an optical particle sizer (OPS, TSI Inc.), which measures particle size distribution between 300 and 10,000 nm. We compared the data measured by these instruments to conventional instruments (i.e., a widely used laboratory SMPS and an optical particle counter (OPC)) using nano-TiO2 powder as test aerosol particles. The results showed obvious differences in the size distributions between the new and old SMPSs. A possible reason for the differences is that the cyclone inlet of the new SMPS (NanoScan) acted as a disperser of the weakly agglomerated particles and consequently the concentration increased through the breakup of the agglomerates. On the other hand, the particle concentration and size distributions measured by the OPS were similar to the OPC. When indoor aerosol particles were measured, the size distribution measured by the NanoScan was similar to the laboratory SMPS.

Function of Rayon Fibers with Metallophthalocyanine Derivatives: Potential of Low-Molecular Weight Polycyclic Aromatic Hydrocarbon Removal and Bacillus sp. Removal

Polycyclic aromatic hydrocarbons (PAHs) are known as carcinogenic and/or mutagenic substances, and are present at high concentration in polluted environments. It has recently been reported that spore-forming bacteria (e.g., Bacillus spp.) can be transported long distances alive in the atmosphere, which raises the possibility that some of the transported bacteria could have adverse effects on human health. There is thus a need for filters that can remove gaseous PAHs from the air that people breathe and that can inhibit bacterial growth on the filters. We focused on metallophthalocyanine derivatives (M-Pc) which are known to adsorb PAHs as well as to inhibit the growth of bacteria as a potential filtering agent. In this study, we developed different types of M-Pc-supported rayon fibers by changing central metals, functional groups, concentrations of M-Pc and rayon types, and evaluated their removal effects by measuring adsorption rates of 3- and 4-ring PAHs with a HPLC and growth curves of Bacillus sp. with a spectrophotometer. The results showed that both the effects depended on functional groups and concentrations of M-Pc, and rayon types. The most effective combination was observed in Fe-Pc with sulfo group supported on cationized rayon fiber at the concentration of 2 to 3.3 wt%. Central metal species of M-Pc were influenced only on the antibacterial properties. This fiber would be applicable to filtering agents and textiles.