Marta C. Figueiredo

Competition between Hydrogen Evolution and Carbon Dioxide Reduction on Copper Electrodes in Mildly Acidic Media

Understanding the competition between hydrogen evolution and CO2 reduction is of fundamental importance to increase the faradaic efficiency for electrocatalytic CO2 reduction in aqueous electrolytes. Here, by using a copper rotating disc electrode, we find that the major hydrogen evolution pathway competing with CO2 reduction is water reduction, even in a relatively acidic electrolyte (pH 2.5). The mass-transport-limited reduction of protons takes place at potentials for which there is no significant competition with CO2 reduction. This selective inhibitory effect of CO2 on water reduction, as well as the difference in onset potential even after correction for local pH changes, highlights the importance of differentiating between water reduction and proton reduction pathways for hydrogen evolution. In-situ FTIR spectroscopy indicates that the adsorbed CO formed during CO2 reduction is the primary intermediate responsible for inhibiting the water reduction process, which may be one of the main mechanisms by which copper maintains a high faradaic efficiency for CO2 reduction in neutral media.

Structure- and Potential-Dependent Cation Effects on CO Reduction at Copper Single-Crystal Electrodes

The complexity of the electrocatalytic reduction of CO to CH4 and C2H4 on copper electrodes prevents a straightforward elucidation of the reaction mechanism and the design of new and better catalysts. Although structural and electrolyte effects have been separately studied, there are no reports on structure-sensitive cation effects on the catalyst’s selectivity over a wide potential range. Therefore, we investigated CO reduction on Cu(100), Cu(111), and Cu(polycrystalline) electrodes in 0.1 M alkaline hydroxide electrolytes (LiOH, NaOH, KOH, RbOH, CsOH) between 0 and −1.5 V vs RHE. We used online electrochemical mass spectrometry and high-performance liquid chromatography to determine the product distribution as a function of electrode structure, cation size, and applied potential. First, cation effects are potential dependent, as larger cations increase the selectivity of all electrodes toward ethylene at E > −0.45 V vs RHE, but methane is favored at more negative potentials. Second, cation effects are structure-sensitive, as the onset potential for C2H4 formation depends on the electrode structure and cation size, whereas that for CH4 does not. Fourier Transform infrared spectroscopy (FTIR) and density functional theory help to understand how cations favor ethylene over methane at low overpotentials on Cu(100). The rate-determining step to methane and ethylene formation is CO hydrogenation, which is considerably easier in the presence of alkaline cations for a CO dimer compared to a CO monomer. For Li+ and Na+, the stabilization is such that hydrogenated dimers are observable with FTIR at low overpotentials. Thus, potential-dependent, structure-sensitive cation effects help steer the selectivity toward specific products.

Redox transformations of adsorbed NO molecules on a Pt(100) electrode

The electrochemical behavior of adsorbed NO molecules on a Pt(100) electrode has been studied in perchloric acid solutions by means of cyclic voltammetry. According to the literature data, a saturated NO adlayer with a coverage of ∼0.5 monolayers (MLs) is formed under open circuit conditions in an acidic nitrite solution as a result of a disproportionation reaction. The saturated adlayer is stable in the potential range of 0.4–0.9 V vs. a reversible hydrogen electrode in 0.1 M HClO4. NO molecules are oxidized at 0.9–1.1 V with the formation of adsorbed nitrite anions, and they can be reduced to ammonia at potentials less than 0.4 V. In this paper it has been shown that the adlayer stability depends on the surface coverage and extent of ordering. An unsaturated NO adlayer demonstrates NO ↔ NH3 redox transformations at 0.5–0.8 V.

Nitrate Reduction on Platinum (111) Surfaces Modifiedl with Bi: Single Crystalsl and Nanoparticles

Abstract Nitrate reduction on well-oriented platinum surfaces modified with Bi adatoms has been studied. The quantification of the electrocatalytic enhancement of the reaction rate due to the presence of Bi at different coverages was made on Pt(111) and the vicinal surfaces Pt(554) and Pt(332). These contain 9 and 5 atoms-width (111) terraces, respectively, separated by (110) monoatomic steps. The study was then extended to preferentially {111}Pt oriented nanoparticles. In all cases, Bi catalyzes nitrate reduction at high potentials, but the catalytic current suddenly drops when Bi is reduced. The analysis of the variation of catalytic activity with Bi coverage reveals the participation of a third body effect, meaning that Bi impedes the NO formation on the surface that acts as a poison for the nitrate reduction. The poisoning effect was also quantified by measuring the stripping of adsorbed NO spontaneously formed by contacting, with nitrate solutions, electrodes with different Bi coverage. The results of both single crystals and preferentially oriented nanoparticles agree with the supposed third body effect. The comparison of Pt nanoparticles with the stepped surfaces, Pt(554) and Pt(332), suggests that the main differences are related to the size of the terraces and not to the existence of defects/steps that do not seem to play any significant contribution to the catalysis.

Spectro-Electrochemical Examination of the Formation of Dimethyl Carbonate from CO and Methanol at Different Electrode Materials

In this work, we report a fundamental mechanistic study of the electrochemical oxidative carbonylation of methanol with CO for the synthesis of dimethyl carbonate on metallic electrodes at low overpotentials. For the first time, the reaction was shown to take place on the metallic catalysts without need of oxidized metals or additives. Moreover, in-situ spectroelectrochemical techniques were applied to this electrosynthesis reaction in order to reveal the reaction intermediates and to shed light into the reaction mechanism. Fourier transformed infrared spectroscopy was used with different electrode materials (Au, Pd, Pt, and Ag) to assess the effect of the electrode material on the reaction and the dependence of products and intermediates on the applied potentials. It was observed that the dimethyl carbonate is only formed when the electrode is able to decompose/oxidize MeOH to form (adsorbed) methoxy groups that can further react with CO to dimethyl carbonate. Furthermore, the electrode needs to adsorb CO not too strongly; otherwise, further reaction will be inhibited because of surface poisoning by CO.

Electrodeposited Mesoporous Pt for Direct Ethanol Fuel Cells Anodes

Powered by TCPDF (www.tcpdf.org) This material is protected by copyright and other intellectual property rights, and duplication or sale of all or part of any of the repository collections is not permitted, except that material may be duplicated by you for your research use or educational purposes in electronic or print form. You must obtain permission for any other use. Electronic or print copies may not be offered, whether for sale or otherwise to anyone who is not an authorised user. Nguyet Doan; Figueiredo, Marta C.; Johans, Christoffer; Kallio, Tanja

Spectroscopic Investigation of the Electrosynthesis of Diphenyl Carbonate from CO and Phenol on Gold Electrodes

In this work, we study the synthesis of diphenyl carbonate (DPC) from phenol and CO on gold electrodes studied by means of in situ Fourier transform infrared spectroscopy (FTIR). The results show that, on gold electrodes, the formation of DPC is observed at potentials as low as 0.4 V vs Ag/AgCl, together with the formation of dimethyl carbonate (DMC) from the carbonylation of methanol that was used as a solvent. The spectroelectrochemical results also suggest that the formation of DPC occurs via the replacement of the methoxy groups from DMC with phenoxy groups from phenol and not directly by the carbonylation of phenol. Although this transesterification process is known to occur with heterogeneous catalysts, it has not been reported under electrochemical conditions. These are interesting findings, since the direct DPC production by carbonylation of phenol to DPC is usually performed with Pd-based catalysts. With this reaction scheme of transesterification happening under electrochemical conditions, other non-Pd catalysts could be used as well for one-step DPC production from phenol and CO. These findings give important mechanistic insights into this reaction and open up possibilities to an alternative process for the production of DPC.