Martha Liley

FluidFM: Combining Atomic Force Microscopy and Nanofluidics in a Universal Liquid Delivery System for Single Cell Applications and Beyond

We describe the fluidFM, an atomic force microscope (AFM) based on hollow cantilevers for local liquid dispensing and stimulation of single living cells under physiological conditions. A nanofluidic channel in the cantilever allows soluble molecules to be dispensed through a submicrometer aperture in the AFM tip. The sensitive AFM force feedback allows controlled approach of the tip to a sample for extremely local modification of surfaces in liquid environments. It also allows reliable discrimination between gentle contact with a cell membrane or its perforation. Using these two procedures, dyes have been introduced into individual living cells and even selected subcellular structures of these cells. The universality and versatility of the fluidFM will stimulate original experiments at the submicrometer scale not only in biology but also in physics, chemistry, and material science.

Nanodispenser for attoliter volume deposition using atomic force microscopy probes modified by focused-ion-beam milling

In this letter, we describe the on-demand dispensing of single liquid droplets with volumes down to a few attoliters and submicrometric spacing. This dispensing is achieved using a standard atomic force microscope probe, with a 200 nm aperture at the tip apex, opened by focused ion beam milling. The inside of the tip is used as reservoir for the liquid. This maskless dispensing, realized in ambient environment, permits the direct creation of droplet arrays. Nanoparticles, suspended in the liquid, were organized on a surface.

Immobilization of histidine-tagged proteins on gold surfaces using chelator thioalkanes

The reversible, oriented immobilization of proteins on solid surfaces is a prerequisite for the investigation of molecular interactions and the controlled formation of supramolecular assemblies. This paper describes a generally applicable method using a synthetic chelator thioalkane that can be self-assembled on gold surfaces. The reversible binding of an anti-lysozyme F(ab) fragment modified with a C-terminal hexahistidine extension was monitored and the apparent dissociation constants determined using surface plasmon resonance. Infra-red spectroscopy demonstrated that the secondary structure of the protein was unaffected by the immobilization process. The retention of functionality of the immobilized protein was also successfully demonstrated. Given the mild reaction conditions and reversibility, this method of oriented immobilization of proteins opens possibilities for the development of biosensors.

Biologically addressable monolayer structures formed by templates of sulfur-bearing molecules

We demonstrate that the combined application of Langmuir-Blodgett and self-assembly techniques allows the fabrication of patterns with contrasting surface properties on gold substrates. The process is monitored using fluorescence microscopy and surface plasmon spectroscopy and microscopy. These structures are suitable for the investigation of biochemical processes at surfaces and in ultrathin films. Two examples of such processes are shown. In the first example, the structures are addressed through the binding of a monoclonal antibody to a peptide. This demonstrates the formation of self-assembled monolayers by cysteine-bearing peptides on gold, and the directed binding of proteins to the structured layers. A high contrast between specific and unspecific binding of proteins is observed by the patterned presentation of antigens. Such films possess considerable potential for the design of multichannel sensor devices. In the second example, a structured phospholipid layer is produced by controlled self-assembly from vesicle solution. The structures created--areas of phospholipid bilayer, surrounded by a matrix of phospholipid monolayer--allow formation of a supported bilayer which is robust and strongly bound to the gold support, with small areas of free-standing bilayer which very closely resemble a phospholipid cell membrane.

Nanoscale dispensing of liquids through cantilevered probes

Nanoscale dispensing is a novel technique to deposit material and create structures at dimensions of 100 nm and below. It has great flexibility in feature shape and choice of deposited material. Due to its potential low cost and lack of time consuming steps, it represents an interesting complementary tool to standard lithographic processes. The key feature of nanodispensing is deposition of liquids through an apertured scanning force microscopy probe tip. In the first experiments, liquid is manually loaded into a hollow pyramidal probe tip. Upon contact of the tip and the substrate, liquid at the end of the tip is transferred to the substrate surface. Moving the sample during contact allows to write features with sizes that can be as small as 100 nm and below, largely dependent on the aperture diameter. This approach is novel, and has recently been demonstrated in our laboratory for the first time, with feature sizes still well above 1 µm.

Supramolecular architectures for the functionalization of solid surfaces

Surface plasmon optical techniques are described as sensitive tools that allow for the on-line characterization of supramolecular biofunctional architectures at solid/solution interfaces. After a short introduction into the fundamentals of surface plasmon optics the observation of the build up of a functional bio-interface by the self-assembly process of long chain thiolates at an Au surface is described. Criteria are developed for tailoring the SAM architectures optimized for maximum protein binding from solution by specific bio-recognition reactions. SPM is employed to image the selective binding of streptavidin to a functionalized SAM laterally patterned by UV-photolithographic techniques.

Parallel AFM imaging and force spectroscopy using two‐dimensional probe arrays for applications in cell biology

Atomic force microscopy (AFM) investigations of living cells provide new information in both biology and medicine. However, slow cell dynamics and the need for statistically significant sample sizes mean that data collection can be an extremely lengthy process. We address this problem by parallelizing AFM experiments using a two‐dimensional cantilever array, instead of a single cantilever. We have developed an instrument able to operate a two‐dimensional cantilever array, to perform topographical and mechanical investigations in both air and liquid. Deflection readout for all cantilevers of the probe array is performed in parallel and online by interferometry. Probe arrays were microfabricated in silicon nitride. Proof‐of‐concept has been demonstrated by analyzing the topography of hard surfaces and fixed cells in parallel, and by performing parallel force spectroscopy on living cells. These results open new research opportunities in cell biology by measuring the adhesion and elastic properties of a large number of cells. Both properties are essential parameters for research in metastatic cancer development. Copyright

Increased plasticity of the stiffness of melanoma cells correlates with their acquisition of metastatic properties.

UNLABELLED The stiffness of tumor cells varies during cancer progression. In particular, metastatic carcinoma cells analyzed by Atomic Force Microscopy (AFM) appear softer than non-invasive and normal cells. Here we examined by AFM how the stiffness of melanoma cells varies during progression from non-invasive Radial Growth Phase (RGP) to invasive Vertical Growth Phase (VGP) and to metastatic tumors. We show that transformation of melanocytes to RGP and to VGP cells is characterized by decreased cell stiffness. However, further progression to metastatic melanoma is accompanied by increased cell stiffness and the acquisition of higher plasticity by tumor cells, which is manifested by their ability to greatly augment or reduce their stiffness in response to diverse adhesion conditions. We conclude that increased plasticity, rather than decreased stiffness as suggested for other tumor types, is a marker of melanoma malignancy. These findings advise caution about the potential use of AFM for melanoma diagnosis. FROM THE CLINICAL EDITOR This study investigates the changes to cellular stiffness in metastatic melanoma cells examined via atomic force microscopy. The results demonstrate that increased plasticity is a marker of melanoma malignancy, as opposed to decreased stiffness.

Measuring cell adhesion forces during the cell cycle by force spectroscopy

Force spectroscopy has been used to measure the adhesion of Saos-2 cells to a glass surface at different phases of the cell cycle. The cells were synchronized in three phases of the cell cycle: G1, S, and G2M. Cells in these phases were compared with unsynchronized and native mitotic cells. Individual cells were attached to an atomic force microscope cantilever, brought into brief contact with the glass surface, and then pulled off again. The force-distance curves obtained allowed the work and maximum force of detachment as well as the number, amplitude, and position of discrete unbinding steps to be determined. A statistical analysis of the data showed that the number of binding proteins or protein complexes present at the cell surface and their binding properties remain similar throughout the cell cycle. This, despite the huge changes in cell morphology and adhesion that occur as the cells enter mitosis. These changes are rather associated with the changes in cytoskeletal organization, which can be quantified by force spectroscopy as changes in cell stiffness.

Use of Force Spectroscopy to Investigate the Adhesion of Living Adherent Cells

The use of force spectroscopy to study the adhesion of living fibroblasts to their culture substrate was investigated. Both primary fibroblasts (PEMF) and a continuous cell line (3T3) were studied on quartz surfaces. Using a fibronectin-coated AFM cantilever, it was possible to detach a large proportion of the 3T3 cells from the quartz surfaces. Their adhesion to the quartz surface and the effects of topography on this adhesion could be quantified. Three parameters characteristic of the adhesion were measured: the maximum force of detachment, the work of adhesion, and the distance of detachment. Few PEMF cells were detached under the same experimental conditions. The potential and limitations of this method in measuring cell/surface interactions for adherent cells are discussed.