Martin Lopez-Garcia

Fast electrical switching of orbital angular momentum modes using ultra-compact integrated vortex emitters

The ability to rapidly switch between orbital angular momentum modes of light has important implications for future classical and quantum systems. In general, orbital angular momentum beams are generated using free-space bulk optical components where the fastest reconfiguration of such systems is around a millisecond using spatial light modulators. In this work, an extremely compact optical vortex emitter is demonstrated with the ability to actively tune between different orbital angular momentum modes. The emitter is tuned using a single electrically contacted thermo-optical control, maintaining device simplicity and micron scale footprint. On-off keying and orbital angular momentum mode switching are achieved at rates of 10 μs and 20 μs respectively.

Photonic multilayer structure of Begonia chloroplasts enhances photosynthetic efficiency

Enhanced light harvesting is an area of interest for optimizing both natural photosynthesis and artificial solar energy capture1,2. Iridescence has been shown to exist widely and in diverse forms in plants and other photosynthetic organisms and symbioses3,4, but there has yet to be any direct link demonstrated between iridescence and photosynthesis. Here we show that epidermal chloroplasts, also known as iridoplasts, in shade-dwelling species of Begonia5, notable for their brilliant blue iridescence, have a photonic crystal structure formed from a periodic arrangement of the light-absorbing thylakoid tissue itself. This structure enhances photosynthesis in two ways: by increasing light capture at the predominantly green wavelengths available in shade conditions, and by directly enhancing quantum yield by 5–10% under low-light conditions. These findings together imply that the iridoplast is a highly modified chloroplast structure adapted to make best use of the extremely low-light conditions in the tropical forest understorey in which it is found5,6. A phylogenetically diverse range of shade-dwelling plant species has been found to produce similarly structured chloroplasts7–9, suggesting that the ability to produce chloroplasts whose membranes are organized as a multilayer with photonic properties may be widespread. In fact, given the well-established diversity and plasticity of chloroplasts10,11, our results imply that photonic effects may be important even in plants that do not show any obvious signs of iridescence to the naked eye but where a highly ordered chloroplast structure may present a clear blue reflectance at the microscale. Chloroplasts are generally thought of as purely photochemical; we suggest that one should also think of them as a photonic structure with a complex interplay between control of light propagation, light capture and photochemistry.

Spectral and angular characteristics of dielectric resonator metasurface at optical frequencies

The capability of manipulating light at subwavelength scale has fostered the applications of flat metasurfaces in various fields. Compared to metallic structure, metasurfaces made of high permittivity low-loss dielectric resonators hold the promise of high efficiency by avoiding high conductive losses of metals at optical frequencies. This letter investigates the spectral and angular characteristics of a dielectric resonator metasurface composed of periodic sub-arrays of resonators with a linearly varying phase response. The far-field response of the metasurface can be decomposed into the response of a single grating element (sub-array) and the grating arrangement response. The analysis also reveals that coupling between resonators has a non-negligible impact on the angular response. Over a wide wavelength range, the simulated and measured angular characteristics of the metasurface provide a definite illustration of how different grating diffraction orders can be selectively suppressed or enhanced through antenna sub-array design.

Analysis and design of a cross dipole nanoantenna for fluorescence-sensing applications

This paper introduces the novel concept of a cross dipole nanoantenna for use in fluorescence based sensing applications. The dual-arm nature of the cross nanoantenna allows a dual resonant structure to be designed such that the shorter arm resonates with the pump wavelength and the longer arm with the emission wavelength. This is expected to further enhance emission from any fluorescent molecule that can couple to both nanoantenna arms when compared with a singly resonant structure. The paper uses the finite-difference time-domain method to first analyze the two-arm nanoantenna case and then shows how intensity enhancement depends on the antenna geometry and tapering of arms in the antenna gap. The results show that smaller gap sizes always produce larger enhancement compared with lightning rod effects due to tapering. A four-arm cross nanoantenna is then studied, highlighting differences from the two-arm case. Finally, the effect of a diagonally aligned molecule transiting the central gap region is studied. The results show that two hotspots occur on either side of the central gap region when the molecule is aligned perpendicular to the transit direction and only a single central hotspot occurs when the alignment is parallel to the transit direction.

Efficient out-coupling and beaming of Tamm optical states via surface plasmon polariton excitation

We present evidence of optical Tamm states to surface plasmon polariton (SPP) coupling. We experimentally demonstrate that for a Bragg stack with a thin metal layer on the surface, hybrid Tamm-SPP modes may be excited when a grating on the air-metal interface is introduced. Out-coupling via the grating to free space propagation is shown to enhance the transmission as well as the directionality and polarization selection for the transmitted beam. We suggest that this system will be useful on those devices, where a metallic electrical contact as well as beaming and polarization control is needed.

Excitonic Optical Tamm States: A Step toward a Full Molecular–Dielectric Photonic Integration

We report the first experimental observation of an Excitonic Optical Tamm State supported at the interface between a periodic multilayer dielectric structure and an organic dye-doped polymer layer. The existence of such states is enabled by the metal-like optical properties of the excitonic layer based on aggregated dye molecules. Experimentally determined dispersion curves, together with simulated data, including field profiles, allow us to identify the nature of these new modes. Our results demonstrate the potential of organic excitonic materials as a powerful means to control light at the nanoscale, offering the prospect of a new alternative type of nanophotonics based on molecular materials.

Evidence of Excitonic Optical Tamm States using Molecular Materials

We report the first experimental observation of an Excitonic Optical Tamm State supported at the interface between a periodic multilayer dielectric structure and an organic dye-doped polymer layer. The existence of such states is enabled by the metal-like optical properties of the excitonic layer based on aggregated dye molecules. Experimentally determined dispersion curves, together with simulated data, including field profiles, allow us to identify the nature of these new modes. Our results demonstrate the potential of organic excitonic materials as a powerful means to control light at the nanoscale, offering the prospect of a new alternative type of nanophotonics based on molecular materials.

Evidence of near-infrared partial photonic bandgap in polymeric rod-connected diamond structures

We present the simulation, fabrication, and optical characterization of low-index polymeric rod-connected diamond (RCD) structures. Such complex three-dimensional photonic crystal structures are created via direct laser writing by two-photon polymerization. To our knowledge, this is the first measurement at near-infrared wavelengths, showing partial photonic bandgaps for this structure. We characterize structures in transmission and reflection using angular resolved Fourier image spectroscopy to visualize the band structure. Comparison of the numerical simulations of such structures with the experimentally measured data show good agreement for both P- and S-polarizations.

Circular GaN Membrane Gratings

This letter presents the fabrication and characterization of freestanding circular GaN gratings on a GaN-on-silicon platform. Optical modes propagate within the freestanding GaN membrane and their number decreases as the thickness of GaN membrane is reduced. Backside thinning of freestanding GaN membranes is used to obtain thinner GaN membranes that are helpful to reduce resonance modes and to broaden the reflectance interference fringes in the visible range. Strong coupling between the incident light and the circular grating is confirmed by angular-resolved reflectance measurement. The influences of the grating parameters on the reflectance spectra are investigated. This letter opens the way to fabricate single-layer GaN resonant gratings in the visible wavelength range.

Modelling defect cavities formed in inverse three-dimensional rod-connected diamond photonic crystals

Defect cavities in 3D photonic crystal can trap and store light in the smallest volumes allowable in dielectric materials, enhancing non-linearities and cavity QED effects. Here, we study inverse rod-connected diamond (RCD) crystals containing point defect cavities using plane-wave expansion and finite-difference time domain methods. By optimizing the dimensions of the crystal, wide photonic bandgaps are obtained. Mid-bandgap resonances can then be engineered by introducing point defects in the crystal. We investigate a variety of single spherical defects at different locations in the unit cell focusing on high-refractive-index-contrast (3.3:1) inverse RCD structures; quality factors (Q-factors) and mode volumes of the resonant cavity modes are calculated. By choosing a symmetric arrangement, consisting of a single sphere defect located at the center of a tetrahedral arrangement, mode volumes < 0.06 cubic wavelengths are obtained, a record for high-index cavities.