Martin Lorenzoni

Randomized controlled trial comparing a variable-thread novel tapered and a standard tapered implant: Interim one-year results

STATEMENT OF PROBLEM A tapered implant with continuously changing threads purported to provide stable tissue support and allow immediate function has been developed. Treatment success and stabilization of supporting tissues over time require documentation. PURPOSE The purpose of this prospective, randomized, controlled, multicenter study was to evaluate changes in bone level and soft tissue behavior between the novel implant (NobelActive/NA) and a standard tapered implant (NobelReplace Tapered Groovy/NR) with regard to immediate function. MATERIAL AND METHODS A total of 177 patients randomly allocated to 3 treatment groups (2 different test implant groups: NA Internal (n=117; internal connection) and External (n=82), and 1 standard treatment group, NR (n=126)) received 325 implants. Implants were placed into healed sites, and all but 6 implants were immediately nonocclusally loaded. Clinical and radiographic evaluations of treatment success, crestal bone levels, and soft tissue changes were performed at the time of placement and after 3, 6, and 12 months. Log-Rank test was used to analyze the differences in survival rate. Marginal bone level was compared using the Kruskal-Wallis test and Mann-Whitney U-test (alpha=.05). RESULTS One-year cumulative survival rates were comparable (96.6% for NA Internal; 96.3% for NA External; 97.6% for NR; P=.852; Log-Rank). Mean (SD) change in bone level was -0.95 mm (1.37) for NA Internal, -0.64 mm (0.97) for NA External, and -0.63 mm (1.18) for NR (P=.589; Kruskal-Wallis). Stable soft tissues and significantly increased papilla scores (P<.001; Wilcoxon signed-rank) were observed for all implant types. CONCLUSIONS The novel implants showed high survival rates as well as stable bone and soft tissue levels after 1 year, and may be recommended for clinical use, even under immediate function.

Evaluation of three‐dimensional changes after sinus floor augmentation with different grafting materials

OBJECTIVE The aim of this retrospective investigation was to assess the dimensional stability of different grafting materials after maxillary sinus floor augmentation with computed tomography (CT) scans. MATERIALS AND METHODS Two postoperative CT scans were available from 16 patients who had undergone maxillary sinus lift procedures. The first scan was made within a few days after the surgical intervention and the second one >6 months later. A total of 25 maxillary sinuses were augmented with different materials before implant insertion by lateral antrostomy in a staged approach. The volume of bone formation was calculated using the Somaris Sienet Magic View software. RESULTS Based on volumetric measurements of the augmented domes derived from the image sections, shrinkage was about 26%. The mean of the augmented bone volume was 3.02 cm(3) (1.4-5.56 cm(3); SD+/-1.18 cm(3)) as determined in the first CT scan. The respective mean volume in the second CT scan amounted to 2.28 cm(3) (0.92-4.46 cm(3); SD+/-1.07 cm(3)). CONCLUSION Within the limits of our descriptive and analytic study, the results indicate a significant reduction of the graft volume after maxillary sinus augmentation. Further prospective studies will have to evaluate the quantitative changes of different bone graft materials for maxillary sinus augmentation procedures in order to improve long-term implant stability.

Prevalence, location and morphology of maxillary sinus septa: systematic review and meta-analysis

AIM To gain further insights and resolve conflicting results in the literature regarding prevalence, predominant location and morphologic variability of maxillary sinus septa. MATERIAL AND METHODS Electronic and hand searching of English literature identified 33 investigations published from 1995 to 2011. Septa were defined as at least 2-4 mm in height. RESULTS Septa were present in 28.4% of 8923 sinuses investigated (95% confidence interval: 24.3-32.5%). Prevalence was significantly higher in atrophic sinuses compared with dentate maxillae (p < 0.001). Septa were located in premolar, molar and retromolar regions in 24.4%, 54.6% and 21.0% respectively. Orientation of septa was transverse in 87.6%, sagittal in 11.1% and horizontal in 1.3% of cases. Septa height measured 7.5 mm on average. Complete septa (dividing the sinus into two separate cavities) were found in only 0.3%. Other rare conditions included multiple septa in one sinus (4.2%) and bilateral septa (17.2%). Septa diagnosis using panoramic radiographs yielded incorrect results in 29% of cases. CONCLUSIONS In view of their high overall prevalence and significant morphologic variability, 3D radiographic imaging prior to sinus floor augmentation may help to reduce complication rates in the presence of maxillary sinus septa.

Fabricating auricular prostheses using three-dimensional soft tissue models☆☆☆

This article describes a method for fabricating an auricular prosthesis. This procedure uses the contours of the soft tissue surface from computerized tomography scans to fabricate a computer-generated, side-inverted 3-dimensional soft tissue model from a solid block of polyurethane using an Endoplan milling machine. The resultant 3-dimensional soft tissue model can then be used as the basis for a wax sculpture. This procedure facilitates the planning of the prosthesis; symmetrical modeling, especially for large, hemifacial defects; and the impression, which can be made on the model itself.

All‐ceramic restoration of zirconia two‐piece implants – a randomized controlled clinical trial

OBJECTIVES Aim of this controlled prospective randomized study was to evaluate the outcome of two-piece zirconia implants compared to titanium implants over a period of up to 24 months. MATERIAL AND METHODS A total of 31 implants (16 zirconia/Ziterion vario Z(®) + 15 titanium/Ziterion vario T(®) ) were inserted primary stable (>30 Ncm) in the maxilla (7) and mandible (24) of 22 patients (13 male, nine female) requiring neither bone nor soft tissue augmentation. After a healing period of 6 months in the maxilla and 4 months in the mandible, ceramic abutments were luted adhesively to the zirconia implants and definitive all-ceramic restoration was performed with high-density ceramics. Radiographic bone levels, condition of the peri-implant mucosa, aesthetic outcome, implant survival and success were recorded for up to 24 months. RESULTS Measurements of mean marginal bone levels 24 months after surgery showed a significant bone loss (P < 0.001) in both groups (Ti: 1.43 (SD ± 0.67) vs. Zir 1.48 (SD ± 1.05). One zirconia implant was lost 8 months after restoration. No further complications were recorded, giving an overall survival and success rate of 93.3% for zirconia and 100% for titanium implants after a period of up to 24 months. CONCLUSIONS After 24 months, success rates of the two-piece ceramic implants showed no significant difference compared to control two-piece titanium implants. The bonded zirconia implant abutment connection appears to be capable with clinical application over the observed period. However, further control measurements need to confirm the presented data.

A comparison of the muscular relaxation effect of TENS and EMG-biofeedback in patients with bruxism.

This study investigated effects of electromyographic (EMG) biofeedback (BFB) and transcutaneous electrical neuromuscular stimulation (TENS) on the EMG activity of the masticatory muscles and skin conductance level (SCL) of patients, suffering from myofacial pain syndrome. In the course of the investigation, EMG activity as well as the SCL was measured after a 20 min BFB or, respectively, after a myomonitor session in 20 patients and pre- and post-treatment values were compared. Results showed tendencies of decreased mean-EMG levels for both groups after the treatment sessions, with higher EMG values for the myomonitor group. There was no indication of a significant decrease in mean EMG levels over the sessions. Furthermore, an increase of the SCL during the period of treatment was observed for both groups in session I and II, while session III produced nearly stable values. No existing correlations for changes in SCL and EMG-activity could be established.

Three-Dimensional Accuracy of Guided Implant Placement: Indirect Assessment of Clinical Outcomes

PURPOSE Precise preoperative implant planning and its exact intraoperative transfer are crucial for successful implant-supported rehabilitation of partially or completely edentulous patients. In the present pilot study, optical laser scanning was used to evaluate deviations between three-dimensional computer-assisted planned and actual implant positions by indirect methods. MATERIAL AND METHODS Five patients receiving a total of 15 implants were included in this study. The used planning software was SimPlant 12.0 (Materialise Dental, Leuven, Belgium) to visualize the implant positions, and with an appropriate guided surgery protocol (Navigator™, Biomet 3i, Palm Beach Gardens, FL, USA) implant positions were implemented via tooth-supported stereolithografic surgical guides. All implants (Osseotite™, Biomet 3i) were inserted in a flapless approach and immediately provided with prefabricated temporary splinted restorations. Intraoral pickup impressions were taken postoperatively, and the implant positions of the master casts were compared with presurgical casts. Implant replica deviations were evaluated by three-dimensional optical laser scanning providing distances and angulations between implant replicas. RESULTS Overall, the postsurgical implant replica positions were found to deviate from the positions in the preoperative cast by a mean of 0.46 ± 0.21 mm (range: 0.09-0.85 mm). Positional deviations were 0.27 ± 0.19 mm (range: 0.04-0.60 mm) along the x-axis representing the buccal-lingual directions, 0.15 ± 0.13 mm (range: 0.0-0.34 mm) along the y-axis representing the ventrodorsal direction, and 0.28 ± 0.19 mm (range: 0.02-0.59 mm) along the z-axis representing cranial and apical directions. Rotational deviations amounted to 14.04 ± 11.6° (range: 0.09-36.47°). CONCLUSIONS The results of this pilot study demonstrate precise transfer of implant replica position by means of simulated guided implant insertion into a preoperative cast and a postoperative cast obtained from impressioning. Further studies are needed to identify appropriate evaluation techniques and mechanisms to increase the transfer precision of three-dimensional planning and guiding systems.

Reproducibility of volumetric measurements on maxillary sinuses.

Although computer assisted volumetric quantification of human maxillary sinuses is commonly used to measure volumetric changes during life, reliability data for this procedure are lacking. The objective of this retrospective study is to test a semi-automatic virtual volumetric analysis technique on 36 CT scans of human maxillary sinuses. Three examiners with different clinical experience performed all measurements in three replicates. As principle of proof, the technique was examined on 12 phantoms with known volumes. The validation of the method revealed that the mean relative error was 0.364%. For the retrospective volumetric measurements from maxillary sinuses the intra- and inter-examiner agreement was quantified using appropriate intraclass correlation coefficients (ICC 1,k and ICC 2,k) and the Bland-Altman analysis. ICC values ranging from 0.997 to 0.999 indicate almost perfect agreement for intra- and inter-examiner data. The Bland-Altman analysis demonstrated good intra- as well as inter-examiner agreement for the two proficient examiners and a lack of agreement for the untrained examiner. It can be concluded that this measurement procedure using CT scans could be strongly recommended for clinical application to determine the volume of human maxillary sinuses reliably.

Immediate provisional restoration of screw-type implants in the posterior mandible: results after 5 years of clinical function.

OBJECTIVE The aim of this prospective study was to evaluate the outcome of immediately provisionally restored implants in the posterior mandible after a minimum of 60 months in function. MATERIAL AND METHODS Twenty-four patients were treated with 40 screw-type implants replacing mandibular molars and premolars. Implants were provisionalized immediately after placement. Radiographic coronal bone levels, implant survival and success were evaluated 12, 24, 36, 48 and 60 months after the final restoration. RESULTS Measurements of the mean marginal bone levels around immediately loaded implants after 12 months showed a significant bone loss (P<0.001) within the first year after the final restoration. Measurements of coronal bone levels after 24, 36, 48 and 60 months, respectively, showed no further significant increase of bone resorption. Two implants were lost within the first year after the final restoration, resulting in an overall survival rate of 95%; a total of three implants were recorded as failures (two implant losses and one excessive bone resorption above 50%), resulting in an overall success rate of 92.5 after an implant observation period of up to 8 years. CONCLUSION The present data revealed results comparable to conventionally loaded implants. Careful patient selection in combination with high primary stability seem to be key factors for immediately loaded implants. Larger long-term randomized clinical trials are needed to confirm the final evidence of this protocol as the standard treatment concept for the partially edentulous mandible.

Overdentures in the Edentulous Mandible Supported by Implants and Retained by a Dolder Bar: A 5‐Year Prospective Study

PURPOSE This prospective study was performed to evaluate the outcomes of XiVE® S plus implants (Dentsply Friadent, Mannheim, Germany) following conventional restoration with bar structures and overdentures in the edentulous mandible. MATERIALS AND METHODS A total of 39 patients were treated with four interforaminal implants (n = 156) splinted by a Dolder bar. Overdentures were attached to the bars after 3 months of healing. As primary outcome measures, clinical and radiological parameters were evaluated at the time of implant placement (baseline) and once a year (1, 2, 3, 4, 5 years) after functional loading. Secondary outcome measures included (i) primary stability and surgical complications, as well as (ii) Periotest® (Medizintechnik Gulden, Modautal, Germany) values, implant survival, and prosthetic complications at baseline and follow-up. RESULTS A total of 156 implants were placed. The vast majority (n = 149) were tightened to >30 Ncm, while torques in the range of 20-30 Ncm were obtained in the remaining cases (n = 7). Mean crestal bone levels around the implants were 0.41 mm at baseline and 1.04/1.20/1.34/1.45/1.44 mm after 1/2/3/4/5 years respectively. The mean values of the plaque, calculus, bleeding, and mucosal indices remained low throughout this period. The reported follow-up periods involved one implant loss after 3 months (survival rate: 99.4%) and one implant failure after 4 years (success rate: 98.4%). Prosthetic complications included factures of bars (n = 3) and denture teeth (n = 7). Prosthetic survival was 100%. CONCLUSIONS Dolder bars to restore oral implants in the edentulous mandible appear to offer a high rate of implant survival, good stability of the peri-implant tissue, and a low rate of prosthetic complications.