Martin Rumpel

Single-layer resonant-waveguide grating for polarization and wavelength selection in Yb:YAG thin-disk lasers.

A single-layer resonant-waveguide grating consisting of a sub-wavelength grating coupler etched into a waveguide is proposed in order to achieve high polarization and high spectral selectivity inside an Yb:YAG thin-disk laser resonator. The designed structure was fabricated with the help of a Lloyds-mirror interference lithography setup followed by reactive ion beam etching down to the desired grating groove depth. The wavelength and polarization dependent reflectivity is measured and compared to the design results. The behaviour of the device at higher temperatures is also investigated in the present work. The device is introduced as the end mirror of an Yb:YAG thin-disk laser cavity. Output powers of up to 123 W with a spectral bandwidth of about 0.5 nm (FWHM) is demonstrated in a multimode configuration (M2~6). In fundamental-mode operation (TEM00 with M2~1.1) 70 W of power with a spectral bandwidth of about 20 pm have been obtained. Moreover, the degree of linear polarization was measured to be higher than 99% for both multimode and fundamental mode operation.

Broadband pulse compression gratings with measured 99.7% diffraction efficiency

We present experimental investigations of grating mirrors with high diffraction efficiencies exceeding 99.7% in the -1st order for TE polarization at a wavelength of 1060 nm, and exceeding a diffraction efficiency of 99% in the wavelength range from 1025 nm to at least 1070 nm. The total efficiency of a four-pass compressor for chirped pulse amplification was >96%. The design, fabrication, and characterization of the fully dielectric grating mirrors are presented.

Amplification of cylindrically polarized laser beams in single crystal fiber amplifiers

Yb:YAG single crystal fiber (SCF) amplifiers have recently drawn much attention in the field of amplification of ultra-short pulses. In this paper, we report on the use of SCF amplifiers for the amplification of cylindrically polarized laser beams, as such beams offer promising properties for numerous applications. While the amplification of cylindrically polarized beams is challenging with other amplifier designs due to thermally induced depolarization, we demonstrate the amplification of 32 W cylindrically polarized beams to an output power of 100 W. A measured degree of radial polarization after the SCF of about 95% indicates an excellent conservation of polarization.

Linearly polarized, narrow-linewidth, and tunable Yb:YAG thin-disk laser.

We report on the design, fabrication, and implementation of grating-waveguide structures (GWS) for intracavity polarization and wavelength selection as well as wavelength tuning. The GWS discussed in this Letter is a combination of a low-index leaky-mode waveguide, a subwavelength diffraction grating, and a highly reflective mirror that was designed to operate in Littrow configuration. Using our device as the end mirror of an Yb:YAG thin-disk laser allowed the extraction of beams that exhibit an extremely narrow laser emission bandwidth of ≈25 pm FWHM and a high degree of linear polarization of 99±0.5%. Moreover, the GWS allows a wavelength tuning range from 1007 to 1053 nm. The high-power suitability and the low loss of the GWS was demonstrated by the intracavity use in an Yb:YAG thin-disk laser with an output power of 325 W in multimode operation (M(2)=6) and with 110 W in fundamental-mode operation (M(2)≈1.2), exhibiting optical efficiencies of 53.2% and 36.2%, respectively. An output power of 1.8 kW, corresponding to a power density of 125 kW/cm(2) on the grating, was achieved in further higher-power experiments.

Circular grating waveguide structures for intracavity generation of azimuthal polarization in a thin-disk laser

We report on the generation of beams with azimuthal polarization using resonant grating waveguide structures (GWSs) inside an Yb:YAG thin-disk laser (TDL) oscillator. Two different GWS concepts were used to select the polarization of the emitted beam. The first uses the resonant reflection principle, and the second is based on the leaky-mode approach already reported in our previous work. Up to 93 W and 103 W of output power were extracted from a TDL with an optical efficiency, η(oo), of 36.2% and 40.1% using the first and the second approaches, respectively. In both cases, a pure azimuthal polarization and a beam quality factor, M2, of about 2.2 were measured. The design, fabrication, and different experimental results, as well as the laser performances for both GWSs, are discussed in the present Letter.

1617 nm emission control of an Er:YAG laser by a corrugated single-layer resonant grating mirror

A resonant grating mirror (RGM) that combines a single layer planar waveguide and a subwavelength grating is used to simultaneously control the beam quality, the spectral bandwidth, and the polarization state of an Er:YAG laser. This simple device is compared to classical methods using several intracavity components: an etalon for wavelength selection, a thin film polarizer for polarization selection, and an aperture for spatial filtering. It is demonstrated that the RGM provides the same polarization purity, an enhanced spectral filtering, and a significant improvement of the beam quality. In CW operation, the Er:YAG laser with a RGM emits an output power of 1.4 W at 1617 nm with a M2 of 1.4.

Investigations on ring-shaped pumping distributions for the generation of beams with radial polarization in an Yb:YAG thin-disk laser.

We present experimental investigations on the generation of radially polarized laser beams excited by a ring-shaped pump intensity distribution in combination with polarizing grating waveguide mirrors in an Yb:YAG thin-disk laser resonator. Hollow optical fiber components were implemented in the pump beam path to transform the commonly used flattop pumping distribution into a ring-shaped distribution. The investigation was focused on finding the optimum mode overlap between the ring-shaped pump spot and the excited first order Laguerre-Gaussian (LG(01)) doughnut mode. The power, efficiency and polarization state of the emitted laser beam as well as the thermal behavior of the disk was compared to that obtained with a standard flattop pumping distribution. A maximum output power of 107 W with a high optical efficiency of 41.2% was achieved by implementing a 300 mm long specially manufactured hollow fiber into the pump beam path. Additionally it was found that at a pump power of 280 W the maximum temperature increase is about 21% below the one observed with standard homogeneous pumping.

Thermal behavior of resonant waveguide-grating mirrors in Yb:YAG thin-disk lasers

We present the experimental investigations of different designs of resonant waveguide-grating (RWG) mirrors, used as intracavity folding mirrors in an Yb:YAG thin-disk laser (TDL). The investigation was focused on the rise of the surface temperature due to the coupling of the incident radiation to a waveguide mode as well as on laser efficiency, polarization, and wavelength selectivity. It was found that the damage threshold and efficiency can be increased significantly with a proper design of the structure in comparison to the simplest design with a single waveguide layer. So far, the presented RWG allow the generation of linear polarization with a narrow spectral linewidth down to 25 pm FWHM in a fundamental mode Yb:YAG TDL. Damage thresholds of 60 kW/cm(2) have been reached where only 63 K of surface temperature increase was observed. This showed that the improved mirrors are suitable for the generation of kW-class narrow linewidth, linearly polarized Yb:YAG TDL.

Yb:YAl 3 (BO 3 ) 4 as gain material in thin-disk oscillators: demonstration of 109 W of IR output power

The first demonstration of an Yb:YAl3(BO3)4 thin-disk laser is reported. An output power of 109 W with an optical efficiency of 50.2% was achieved in multimode CW-operation which is to the best of our knowledge a significant record performance compared to previous reports on CW-lasers with this material. At a lower power level of 19.3 W the material proved its suitability for efficient operation with an optical efficiency of 60.4%. In fundamental-mode operation the extracted output power was 10.4 W with an optical efficiency of 44.5% and a beam propagation factor M(2) = 1.39. The broad emission bandwidth of the material was confirmed by measuring a continuous wavelength tuning range from 1001 to 1053 nm with a maximum output power of 36 W at 1040 nm.

Applications of sub-wavelength grating mirrors in high-power lasers

Abstract A grating waveguide mirror (GWM) results from the combination of a waveguide and a sub-wavelength grating which lead, for given incidence conditions, to polarization and or wavelength filtering. In the present paper, we report on the application of such elements for the selection of the polarization (linear, radial, or azimuthal) as well as the narrowing, stabilizing and tuning of the emission spectrum of high-power lasers. Using a leaky-mode circular GWM, beams with radial and azimuthal polarization with output powers of up to 275 W and 145 W, respectively, could be extracted from a Yb:YAG thin-disk with optical efficiencies of 52.5% and 43%, respectively. In both cases, the GWM was composed of a highly reflective (HR) mirror and a sub-wavelength grating as the end-mirror of the resonator. Using a leaky-mode linear GWM operating under Littrow condition, beams with linear polarization and a narrow spectral bandwidth were obtained from a Yb:YAG thin-disk laser. In multimode operation, an output power of 325 W was achieved at an optical efficiency of 53.5%. In near-fundamental mode operation, 110 W was extracted at an optical efficiency of 36.2%. In this latter case, the spectral bandwidth was measured to be around 25 pm. Moreover, continuous wavelength tuning from 1007 to 1053 nm was demonstrated with our device.