Martyn Hill

Design and fabrication of a new vibration-based electromechanical power generator

A device is described for generating electrical power from mechanical energy in a vibrating environment. The design utilises an electromagnetic transducer and its operating principle is based on the relative movement of a magnet pole with respect to a coil. The approach is suitable for embedded remote microsystems structures with no physical links to the outside world. Simulation, modelling and test results following fabrication of a first prototype have demonstrated that generation of practical amounts of power within a reasonable space is possible. Power generation of more than 1 mW within a volume of 240 mm3 at a vibration frequency of 320 Hz has been obtained.

Micromixing Within Microfluidic Devices

Micromixing is a crucial process within microfluidic systems such as micro total analysis systems (μTAS). A state-of-art review on microstructured mixing devices and their mixing phenomena is given. The review first presents an overview of the characteristics of fluidic behavior at the microscale and their implications in microfluidic mixing processes. According to the two basic principles exploited to induce mixing at the microscale, micromixers are generally classified as being passive or active. Passive mixers solely rely on pumping energy, whereas active mixers rely on an external energy source to achieve mixing. Typical types of passive micromixers are discussed, including T- or Y-shaped, parallel lamination, sequential, focusing enhanced mixers, and droplet micromixers. Examples of active mixers using external forces such as pressure field, electrokinetic, dielectrophoretic, electrowetting, magneto-hydrodynamic, and ultrasound to assist mixing are presented. Finally, the advantages and disadvantages of mixing in a microfluidic environment are discussed.

A Silicon Microfluidic Ultrasonic Separator

Ultrasonic standing waves can be used to generate forces on particles within a fluid. Such forces have a number of potential applications in microfluidic devices. This paper describes a device that provides filtration on a microfluidic scale. It is microfabricated and uses ultrasound in the megahertz frequency range to concentrate particles at a node within the flow. It offers the possibility of a functional equivalent of a centrifugal separator for microfluidic systems. It is constructed using silicon and Pyrex, and hence is compatible with established microfabrication techniques. The modelling, design, fabrication and control of the device are discussed.

Modelling of layered resonators for ultrasonic separation

The potential of ultrasonic techniques for the separation and concentration of particles within a fluid has been investigated in some detail in recent years. Devices for effecting such separation typically consist of a piezoceramic transducer driving into a matching layer, fluid layer and reflector layer. This paper uses an equivalent-circuit transducer model, coupled with acoustic impedance transfer relationships to model such cells with regards to both their electrical characteristics and the strength of the resonance produced under different conditions. The model is compared with experimental results from two different cells and is shown to match experimental values well in terms of electrical characteristics and separator performance. The effects of matching layer thickness are also examined using the model. The importance of the adhesive bonding layer is demonstrated, and it is shown that the model can predict the effects of such a layer. The model is also used to demonstrate the effects of coincident resonances in cell layers and to examine the pressure distribution across cells at key frequencies.

Forthcoming Lab on a Chip tutorial series on acoustofluidics: Acoustofluidics—exploiting ultrasonic standing wave forces and acoustic streaming in microfluidic systems for cell and particle manipulation

Forthcoming lab on a chip tutorial series on acoustofluidics : Acoustofluidics - Exploiting ultrasonic standing wave forces and acoustic streaming in microfluidic systems for cell and particle manipulation

The selection of layer thicknesses to control acoustic radiation force profiles in layered resonators

Ultrasonic standing waves can be used to generate radiation forces on particles within a fluid. A number of authors have derived detailed representations of these forces but these are most commonly applied using an approximation to the energy distribution based upon an idealized standing wave within a mode based upon rigid boundaries. An electro-acoustic model of the acoustic energy distribution within a standing wave with arbitrary thickness boundaries has been expanded to model the radiation force on an example particle within the acoustic field. This is used to examine the force profile on a particle at resonances other than those predicted with rigid boundaries, and with pressure nodes at different positions. A simple analytical method for predicting modal conditions for combinations of frequencies and layer thickness characteristics is presented, which predicts that resonances can exist that will produce a pressure node at arbitrary positions in the fluid layer of such a system. This can be used to design resonators that will drive particles to positions other than the center of the fluid layer, including the fluid/solid boundary of the layer, with significant potential applications in sensing systems. Further, the model also predicts conditions for multiple subwavelength resonances within the fluid layer of a single resonator, each resonance having different nodal planes for particle concentration.

Signal processing techniques applied to human sleep EEG signals - a review

Abstract A bewildering variety of methods for analysing sleep EEG signals can be found in the literature. This article provides an overview of these methods and offers guidelines for choosing appropriate signal processing techniques. The review considers the three key stages required for the analysis of sleep EEGs namely, pre-processing, feature extraction, and feature classification. The pre-processing section describes the most frequently used signal processing techniques that deal with preparation of the sleep EEG signal prior to further analysis. The feature extraction and classification sections are also dedicated to highlight the most commonly used signal analysis methods used for characterising and classifying the sleep EEGs. Performance criteria of the addressed techniques are given where appropriate. The online supplementary materials accompanying this article comprise an extended taxonomy table for each section, which contains the relevant signal processing techniques, their brief descriptions (including their pros and cons where possible) and their specific applications in the field of sleep EEG analysis. In order to further increase the readability of the article, signal processing techniques are also categorised in tabular format based on their application in intensively researched sleep areas such as sleep staging, transient pattern detection and sleep disordered breathing diagnosis.

Array-controlled ultrasonic manipulation of particles in planar acoustic resonator

Ultrasonic particle manipulation tools have many promising applications in life sciences, expanding on the capabilities of current manipulation technologies. In this paper, the ultrasonic manipulation of particles and cells along a microfluidic channel with a piezoelectric array is demonstrated. An array integrated into a planar multilayer resonator structure drives particles toward the pressure nodal plane along the centerline of the channel, then toward the acoustic velocity maximum centered above the subset of elements that are active. Switching the active elements along the array moves trapped particles along the microfluidic channel. A 12-element 1-D array coupled to a rectangular capillary has been modeled and fabricated for experimental testing. The device has a 300-μm-thick channel for a half-wavelength resonance near 2.5 MHz, with 500 μm element pitch. Simulation and experiment confirm the expected trapping of particles at the center of the channel and above the set of active elements. Experiments demonstrated the feasibility of controlling the position of particles along the length of the channel by switching the active array elements.

Manipulation of microparticles using phase- controllable ultrasonic standing waves

A method of manipulating microparticles in a liquid using ultrasound is proposed and demonstrated. An ultrasonic standing wave with nodal planes whose positions are controllable by varying the relative phase of two applied sinusoidal signals is generated using a pair of acoustically matched piezoelectric transducers. The resulting acoustic radiation force is used to trap micron scale particles at a series of arbitrary positions (determined by the relative phase) and then move them in a controlled manner. This method is demonstrated experimentally and 5 μm polystyrene particles are trapped and moved in one dimension through 140 μm.

Deformation of red blood cells using acoustic radiation forces

Acoustic radiation forces have been used to manipulate cells and bacteria in a number of recent microfluidic applications. The net force on a cell has been subject to careful investigation over a number of decades. We demonstrate that the radiation forces also act to deformcells. An ultrasonic standing wave field is created in a 0.1 mm glass capillary at a frequency of 7.9 MHz. Using osmotically swollen red-blood cells, we show observable deformations up to an aspect ratio of 1.35, comparable to deformations created by optical tweezing. In contrast to optical technologies, ultrasonic devices are potentially capable of deforming thousands of cells simultaneously. We create a finite element model that includes both the acoustic environment of the cell, and a model of the cell membrane subject to forces resulting from the non-linear aspects of the acoustic field. The model is found to give reasonable agreement with the experimental results, and shows that the deformation is the result of variation in an acoustic force that is directed outwards at all points on the cell membrane. We foresee applications in diagnostic devices, and in the possibility of mechanically stimulating cells to promote differentiation and physiological effects.