Mary A. Kaiser

Analytical challenges hamper perfluoroalkyl research

The growing concern over these organohalogens, some of which have been found in human blood and appear to be widespread in the environment, led researchers to gather in Hamburg, Germany, in 2003 to evaluate the current state of methods to analyze for the organic contaminants. Jonathan Martin of the University of Toronto and 20 colleagues from industry, government, and academia summarize the main recommendations from the workshop.

Recent developments in trace analysis of poly- and perfluoroalkyl substances

AbstractRecent developments, improvements, and trends in the ultra-trace determination of per- and polyfluoroalkyl substances (PFASs) in environmental and human samples are highlighted and the remaining challenges and uncertainties are outlined and discussed. Understanding the analytical implications of such things as adsorption of PFASs to surfaces, effects of differing matrices, varying PFAS isomer response factors, potential bias effects of sampling, sample preparation, and analysis is critical to measuring highly fluorinated compounds at trace levels. These intricate analytical issues and the potential consequences of ignoring to deal with them correctly are discussed and documented with examples. Isomer-specific analysis and the development of robust multi-chemical methods are identified as topical trends in method development for an ever-increasing number of PFASs of environmental and human interest. Ultimately, the state-of-the-art of current analytical method accuracy is discussed on the basis of results from interlaboratory comparison studies. FigureSeparation of the linear, mono-trifluoromethyl branched, and di-trifluoromethyl branched structural isomers of PFOS and PFOA by ultra-performance liquid chromatography using a conventional C18 reversed-phase column. The PFOS and PFOA structural isomers were detected by tandem mass spectrometry

Partitioning and removal of perfluorooctanoate during rain events: the importance of physical-chemical properties

The potential for airborne emissions to undergo long-range transport or to be removed from the atmosphere is influenced by their physical-chemical properties. When perfluorooctanate (PFO) enters the environment, its physical-chemical properties can vary significantly, depending on whether it exists as an acid, a salt, or a dissociated ion. A summary of the physical-chemical properties of the three most likely environmental states: ammonium perfluorooctanoate (APFO), perfluorooctanoic acid (PFOA) and the dissociated perfluorooctanoate anion (PFO(-)) is presented to illustrate the distinct environmental properties of each. The most volatile species, PFOA, is shown to have a pH-dependent air-water partitioning coefficient (K(aw)). The variability of K(aw) with pH influences the potential for vapor formation from aqueous environments, including rain events. Using the pH-dependent K(aw) and measured rain and air concentrations, it is shown that vapor-phase PFOA is not likely to be present above measurable levels of 0.2 ng m(-3) (12 parts per quadrillion v/v) during a rain event. Because rain concentrations determined in this work are comparable to measurements in other parts of North America, it is unlikely that rain events are a significant source of vapor-phase PFOA for the general North American region. It is shown that PFOA exists primarily in the particle phase in ambient air near direct sources of emissions and is efficiently scavenged by rain droplets, making wet deposition an important removal mechanism for emissions originating as either PFOA or APFO. Washout ratios of particle-associated PFO were determined to range between 1 x 10(5) and 5 x 10(5), in the same range as other semi-volatile compounds for which wet deposition is an important mechanism for atmospheric removal and deposition onto soils and water bodies.

Systematic approach to stationary phase selection in gas chromatography

Abstract A method is presented for selecting gas chromatographic (GC) stationary phases, based on both selectivity and strength parameters. This scheme indicates that additional liquid phases are needed not only for improved stability, but, more importantly, for selectivity in two of the three corners of the selectivity triangle. The method can be automated for computer-controlled GC optimization.

Peer Reviewed: Analytical Challenges Hamper Perfluoroalkyl Research

The growing concern over these organohalogens, some of which have been found in human blood and appear to be widespread in the environment, led researchers to gather in Hamburg, Germany, in 2003 to evaluate the current state of methods to analyze for the organic contaminants. Jonathan Martin of the University of Toronto and 20 colleagues from industry, government, and academia summarize the main recommendations from the workshop.

Method for the Determination of Perfluorooctanoic Acid in Air Samples Using Liquid Chromatography with Mass Spectrometry

Abstract Perfluorooctanoic acid is a completely fluorinated carbo-xylic acid that is usually used in the ammonium salt form as a processing aid in the production of many fluoropolymers and fluoroelastomers. Ammonium perfluorooctanoate readily dissociates in water to give the ammonium and perfluorooctanoate ions. Perfluorooctanoate has been reported to be present in low levels in human serum in the United States and Europe. This study reports on the development and validation of a method for the determination of perfluorooctanoic acid in air samples. This method uses the Occupational Safety and Health Administration (OSHA) Versatile Sampler (OVS) with a nominal 0.3 μ m filter and polystyrene resin sorbent (XAD-2 or XAD-4) followed by determination of the perfluorooctanoate anion by liquid chromatography mass spectrometry. The method was validated in the range of 0.474 to 47.4 μ g/m3 for a 480-L sample. Breakthrough studies showed samples could be collected at 1 L/min for 24 hours or at 15 L/min up to 8 hours without breakthrough. Extract storage stability tests showed that sample extracts in methanol remain stable in glass autosampler vials for up to 13 days following initial injection. Perfluorooctanoic acid stability on OVS tubes was unaffected at both refrigerated and ambient temperatures. The overall average retention efficiency was 92.1% with a pooled RSD95 of 5.8% at five concentration levels (0.474 μ g/m3 to 47.4 μ g/m3).

Understanding Potential Exposure Sources of Perfluorinated Carboxylic Acids in the Workplace

This paper integrates perspectives from analytical chemistry, environmental engineering, and industrial hygiene to better understand how workers may be exposed to perfluorinated carboxylic acids when handling them in the workplace in order to identify appropriate exposure controls. Due to the dramatic difference in physical properties of the protonated acid form and the anionic form, this family of chemicals provides unique industrial hygiene challenges. Workplace monitoring, experimental data, and modeling results were used to ascertain the most probable workplace exposure sources and transport mechanisms for perfluorooctanoic acid (PFOA) and its ammonium salt (APFO). PFOA is biopersistent and its measurement in the blood has been used to assess human exposure since it integrates exposure from all routes of entry. Monitoring suggests that inhalation of airborne material may be an important exposure route. Transport studies indicated that, under low pH conditions, PFOA, the undissociated (acid) species, actively partitions from water into air. In addition, solid-phase PFOA and APFO may also sublime into the air. Modeling studies determined that contributions from surface sublimation and loss from low pH aqueous solutions can be significant potential sources of workplace exposure. These findings suggest that keeping surfaces clean, preventing accumulation of material in unventilated areas, removing solids from waste trenches and sumps, and maintaining neutral pH in sumps can lower workplace exposures.

Efficient “total” extraction of perfluorooctanoate from polytetrafluoroethylene fluoropolymer

To determine the optimum conditions for the complete extraction of perfluorooctanoate (PFO) from polytetrafluoroethylene fluoropolymers, sample preparation and pressurized solvent extraction (PSE) conditions were investigated. Solvent extraction temperature, solvent residence time, relaxation time between extractions, and the effects of heating before PSE showed that methanol at 150 degrees C extraction temperature and a 12 min solvent residence time were the most efficient conditions. Preheating the polymer before extraction at 150 degrees C for 24 h significantly enhanced the quantity of PFO removed. Heating above 150 degrees C resulted in loss of PFO. PFO was determined by liquid chromatography with tandem mass spectrometry.

Analytical Challenges Hamper Perfluoroalkyl Research : researches need better tools to get to the bootom of the contamination mystery

The growing concern over these organohalogens, some of which have been found in human blood and appear to be widespread in the environment, led researchers to gather in Hamburg, Germany, in 2003 to evaluate the current state of methods to analyze for the organic contaminants. Jonathan Martin of the University of Toronto and 20 colleagues from industry, government, and academia summarize the main recommendations from the workshop.

Advancement in Perfluoroalkyl Research Hampered by Analytical Challenges

The growing concern over these organohalogens, some of which have been found in human blood and appear to be widespread in the environment, led researchers to gather in Hamburg, Germany, in 2003 to evaluate the current state of methods to analyze for the organic contaminants. Jonathan Martin of the University of Toronto and 20 colleagues from industry, government, and academia summarize the main recommendations from the workshop.