Marzena Grucela-Zajac

Synthesis, materials characterization and opto(electrical) properties of unsymmetrical azomethines with benzothiazole core

Optical (UV-vis and photoluminescence) properties of two soluble organic molecules based on azomethines with benzothiazole core (BTA1 and BTA2) were reported. The structures of both compounds are characterized by means FTIR, (1)H NMR, and (13)C NMR spectroscopy and elemental analysis; the results show an agreement with the proposed structure. The investigated compounds emitted blue light. Influence of excitation wavelength and concentration on maximum and intensity of emission of BTA1 and BTA2 was found. Electrochemical properties of the compounds were studied by differential pulse voltammetry. Introduction of fluorine moieties (BTA1) resulted in lower energy band gap (E(g)) of approximately ∼0.5 eV, whereas BTA2 showed E(g) of ∼2.8 eV. The devices comprised of BTA1 with P3HT:PCBM (1:1:1) showed an open circuit voltage (V(OC)) of 0.40 V, a short circuit current (J(SC)) of 1.19 mA/cm(2), and a fill factor (FF) of 0.23, giving a power-conversion efficiency (PCE) of 0.10% under AM1.5 G irradiation (100 mW/cm(2)).

(Photo)physical Properties of New Molecular Glasses End-Capped with Thiophene Rings Composed of Diimide and Imine Units

New symmetrical arylene bisimide derivatives formed by using electron-donating–electron-accepting systems were synthesized. They consist of a phthalic diimide or naphthalenediimide core and imine linkages and are end-capped with thiophene, bithiophene, and (ethylenedioxy)thiophene units. Moreover, polymers were obtained from a new diamine, N,N′-bis(5-aminonaphthalenyl)naphthalene-1,4,5,8-dicarboximide and 2,5-thiophenedicarboxaldehyde or 2,2′-bithiophene-5,5′-dicarboxaldehyde. The prepared azomethine diimides exhibited glass-forming properties. The obtained compounds emitted blue light with the emission maximum at 470 nm. The value of the absorption coefficient was determined as a function of the photon energy using spectroscopic ellipsometry. All compounds are electrochemically active and undergo reversible electrochemical reduction and irreversible oxidation processes as was found in cyclic voltammetry and differential pulse voltammetry (DPV) studies. They exhibited a low electrochemically (DPV) calculated energy band gap (Eg) from 1.14 to 1.70 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels and Eg were additionally calculated theoretically by density functional theory at the B3LYP/6-31G(d,p) level. The photovoltaic properties of two model compounds as the active layer in organic solar cells in the configuration indium tin oxide/poly(3,4-(ethylenedioxy)thiophene):poly(styrenesulfonate)/active layer/Al under an illumination of 1.3 mW/cm2 were studied. The device comprising poly(3-hexylthiophene) with the compound end-capped with bithiophene rings showed the highest value of Voc (above 1 V). The conversion efficiency of the fabricated solar cell was in the range of 0.69–0.90%.

Comparative studies of structural, thermal, optical, and electrochemical properties of azines with different end groups with their azomethine analogues toward application in (opto)electronics.

Two series of azines and their azomethine analogues were prepared via condensation reaction of benzaldehyde, 2-hydroxybenzaldehyde, 4-pyridinecarboxaldehyde, 2-thiophenecarboxaldehyde, and 4-(diphenylamino)benzaldehyde with hydrazine monohydrate and 1,4-phenylenediamine, respectively. The structures of given compounds were characterized by FTIR, (1)H NMR, and (13)C NMR spectroscopy as well as elemental analysis. Optical, electrochemical, and thermal properties of all compounds were investigated by means of differential scanning calorimetry (DSC), UV-vis spectroscopy, stationary and time-resolved photoluminescence spectroscopy, and cycling voltammetry (CV). Additionally, the electronic properties, that is, orbital energies and resulting energy gap were calculated theoretically by density functional theory (DFT). Influence of chemical structure of the compounds on their properties was analyzed.

Optical properties of unsymmetrical azomethines with one imine bonds

We have explored the photoluminescence (PL) and electronic properties, that is, orbital energies and resulting energy gap calculated theoretically by density functional theory (DFT) of four unsymmetrical (UAz1-UAz4) azomethines. All of the investigated compounds exhibited mesomorphic behavior. The photoluminescence studies have shown that molecular structure of the imines influenced both the PL properties and HOMO-LUMO levels of azomethines. Azomethines emitted violet, blue or green light. The effect of excitation wavelength and concentration on the PL properties has been detected as well. Unsymmetrical imine UAz3 posses carbazole unit exhibited lower both HOMO and LUMO energies compare to others investigated azomethines. Additionally, azomethines were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Two unsymmetrical imines (UAz2 and UAz3) exhibited irreversible oxidation behavior. The HOMO level of the compound with ethylcarbazole (UAz2) moiety was observed at -5.22 eV, while for the UAz3 with phenoxybiphenyl unit was found at -5.64 eV. The data obtained by theoretical calculation using DFT method was very similar to the results obtained by electrochemical measurements.