Massimo Bambagiotti-Alberti

Flavonol glycosides from sedum telephium subspecies Maximum leaves

Abstract Two new flavonol glycosides, kaempferol 3- O - β -neohesperidoside-7- O - α -rhamnoside and quercetin 3- O - β -neohesperidoside-7- O - α -rhamnoside were identified in the fresh leaves of Sedum telephium ssp. maximum . The known compounds, quercetin, kaempferol and their 3-glucosides, 7-rhamnosides and 3,7-dirhamnosides were also identified. All compounds were characterized by means of chemical and spectroscopic methods. NOE experiments were performed to detect the glycosidic bond at the 7-hydroxyl of the aglycone molecules.

Improving gas chromatographic determination of residual solvents in pharmaceuticals by the combined use of headspace solid-phase microextraction and isotopic dilution

Cyclohexane and toluene were gas chromatographically determined via headspace solid-phase microextraction both in ketoprofen drug substance and ketoprofen capsules by a procedure relying on isotopic dilution (ID), an analytical tool derived from mass spectrometry (MS). This approach, using an internal standard method, gave mean precision and accuracy (RSD 2.56%, 2.97% and bias 0.21%, -0.99% for cyclohexane and toluene, respectively) not obtainable by the more commonly used external standard ones in the presence of real sample matrices. Optimisation of the operative conditions was also supported by experimental design. More generally, the proposed method, exploiting ID without resort to the costly MS instrumentation, could be recommended whenever opportune deuterated analogues of the target analytes and GC capillary columns able to separate all the peaks involved are ready available on the market.

Complete assignment of the 1H and 13C NMR spectra of secoisolariciresinol diglucoside, a mammalian lignan precursor isolated from Linum usitatissimum

A convenient isolation and purification protocol for secoisolariciresinol diglucoside (1), a precursor of the biologically active mammalian lignans enterolactone and enterodiol, from flax seed is reported together with an extensive 1D‐ and 2D‐NMR study (GE‐HSQC, GE‐HMBC and NOESY) leading to its definitive characterization as 2,3‐bis[(4‐hydroxy‐3‐methoxyphenyl)methyl]‐1,4‐butanediyl bis‐[R‐(R*,R*)]‐β‐D‐glucopyranoside. Copyright

Development of a densitometric method for the determination of cephalexin as an alternative to the standard HPLC procedure

A HPTLC-densitometric method was developed in order to obtain a reliable procedure for routine analysis of cephalexin in pharmaceutical formulations. Optimization of TLC conditions for the densitometric scanning was reached by eluting HPTLC silica gel plates in an horizontal developing chamber. Quantitation of cephalexin was performed in single beam reflectance mode by using a computer-controlled densitometric scanner and applying a five-point calibration. A linear regression has been found in the 200-1000 ng range. The setup method is precise, reproducible and accurate. Recovery was also assessed by comparison with the HPLC USP XXIII alternate method. In this case HPTLC-densitometry appears worth of consideration as being relatively inexpensive and time-saving (up to 12 samples can be determined simultaneously in less than 15 min with a solvent consumption of about 15 ml). The results suggest that the proposed method may be used in place of HPLC for the routine quantitation of cephalexin in both pure and dosage forms.

Characterization of Sanguinaria canadensis L. fluid extract by FAB mass spectrometry

Positive-ion fast atom bombardment mass spectrometry was used for the rapid characterization of commercial Sanguinaria canadensis L. fluid extracts. Quaternary and non-quaternary benzophenanthridine alkaloids afford persistent peaks due to [M]+ and [M+H]+ ionic species, respectively, and their relative abundances are in good agreement with previously reported per cent analytical data. The procedure allowed sanguinarine, chelerythrine, chelirubine, sanguilutine, protopine, allocryptopine and the isomers sanguirubine and/or chelilutine to be effectively detected by means of persistent and intense peaks in all the samples examined.

Selective determination of aloin in different matrices by HPTLC densitometry in fluorescence mode

A novel method based on the fluorescence excited solely on aloin by a H₃BO₃ derivatizing procedure, allowed its rapid and selective determination among the co-occurring components in a variety of complex matrices as several Aloes dried extracts and related commercial products. HPTLC LiChrospher silica gel 60 F254S, 20 cm x 10 cm, plates with ethyl formate: CH₃OH:H₂O (100:14.5:10, v/v) as the mobile phase were used. Densitometric determinations were performed in fluorescence mode, exciting wavelength 365 nm, optical filter K540 after derivatization with H₃BO₃. The method was validated giving rise to a dependable and high throughput procedure well suited to routine application. Aloin was quantified in the range of 110-330 ng with RSD of repeatability and intermediate precision not exceeding 2.3% and accuracy inside the acceptance limits.

Physico-chemical and structural characterization of diacerhein.

The physico-chemical and structural characterization of diacerhein, an anthraquinone with antiinflammatory activity, employed in the symptomatic treatment of inflammatory osteoarthritis, is reported. The combined use of FT-IR, DSC, X-ray powder and single-crystal diffraction has provided a valuable tool to fully characterize the title compound. The X-ray diffraction study has revealed the existence of hydrogen-bond assisted tight packing of the quasi-planar molecules in the solid. The collected results are intended to implement the information required for the compilation of drug master files.

Determination of benzalkonium chloride in contact lens solutions by positive-ion fast atom bombardment mass spectrometry☆

Under positive-ion fast atom bombardment (FAB) mass spectrometric conditions, benzalkonium chloride (BAK) afforded intense peaks at m/z 304 and 332, corresponding to the intact cations [M--Cl]+ of C12 and C14 homologues, respectively. The use of benzethonium chloride as an internal standard and thioglycerol as a FAB matrix allowed the direct and specific determination of the BAK content (0.004-0.020%) in commercial hard contact lens solutions through the individual assay of the two alkyl homologues. A linear relationship between the homologue concentration and the peak-area ratio was observed over the concentration range 3-180 micrograms ml-1.

High throughput headspace GC-MS quantitative method to measure the amount of carbon monoxide in treated tuna fish†

A robust and dependable headspace HS-GC-MS method has been developed for the determination of carbon monoxide (CO) treated tuna fish. The performance of the method has been evaluated by analyzing spiked and blank samples. The proposed method uses a programmed temperature vaporizing (PTV) injector to implement the HS injection and overcome the negative effects on the column of water contained in the sample. The level of CO could be easily detected in the treated samples, its amount differing markedly from that detected in the untreated samples. Proper oven temperature programming prevented any deterioration of chromatographic performance caused by the accumulation of water, carbon dioxide and other low molecular weight hydrocarbons in the column during serial analyses. The introduction of PTV injection and the restoring of GC column, by oven temperature programming, were crucial for obtaining the required robustness. This procedure assures the run-to-run repeatability necessary for high throughput applications. The method affords linear calibration curves ranging from 50 to 2500 ng/g of CO content in tuna sample.

Validation of a reversed phase high performance thin layer chromatographic-densitometric method for secoisolariciresinol diglucoside determination in flaxseed

The validation of a HPTLC-densitometric method for the determination of secoisolariciresinol diglucoside (SDG) in flaxseed was performed improving the reproducibility of a previously reported HPTLC densitometric procedure by the use of fully wettable reversed phase plates (silica gel 60 RP18W F(254S), 10cmx10cm) with MeOH:HCOOH 0.1% (40:60, v/v) mobile phase. The analysis required only the alkaline hydrolysis in aqueous medium of undefatted samples and densitometry at 282nm of HPTLC runs. The method was validated following the protocol proposed by the Société Francaise des Sciences et Techniques Pharmaceutiques (SFSTP) giving rise to a dependable and high throughput procedure well suited to routine application. SDG was quantified in the range of 321-1071ng with RSD of repeatability and intermediate precision not exceeding 3.61% and accuracy inside the acceptance limits. Flaxseed of five cultivars of different origin was elected as test-bed.