Massimo Innocenti

Ethanol Oxidation on Electrocatalysts Obtained by Spontaneous Deposition of Palladium onto Nickel-Zinc Materials

Ni-Zn and Ni-Zn-P alloys supported on Vulcan XC-72 are effective materials for the spontaneous deposition of palladium through redox transmetalation with Pd(IV) salts. The materials obtained, Pd-(Ni-Zn)/C and Pd-(Ni-Zn-P)/C, have been characterized by a variety of techniques. The analytical and spectroscopic data show that the surface of Pd-(Ni-Zn)/C and Pd-(Ni-Zn-P)/C contain very small, highly dispersed, and highly crystalline palladium clusters as well as single palladium sites, likely stabilized by interaction with oxygen atoms from Ni--O moieties. As a reference material, a nanostructured Pd/C material was prepared by reduction of an aqueous solution of PdCl(2)/HCl with ethylene glycol in the presence of Vulcan XC-72. In Pd/C, the Pd particles are larger, less dispersed, and much less crystalline. Glassy carbon electrodes coated with the Pd-(Ni-Zn)/C and Pd-(Ni-Zn-P)/C materials, containing very low Pd loadings (22-25 microg cm(-2)), were studied for the oxidation of ethanol in alkaline media in half cells and provided excellent results in terms of both specific current (as high as 3600 A g(Pd)(-1) at room temperature) and onset potential (as low as -0.6 V vs Ag/AgCl/KCl(sat)).

Comparison of the rates of joint arthroplasty in patients with severe factor VIII and IX deficiency: an index of different clinical severity of the 2 coagulation disorders.

Data from the Italian Hemophilia Centres were collected to perform a retrospective survey of joint arthroplasty in patients with severe hemophilia. Twenty-nine of 49 hemophilia centers reported that 328 of the 347 operations were carried out in 253 patients with severe hemophilia A (HA) and 19 in 15 patients with severe hemophilia B (HB). When results were normalized to the whole Italian hemophilia population (1770 severe HA and 319 severe HB), patients with HA had a 3-fold higher risk of undergoing joint arthroplasty (odds ratio [OR], 3.38; 95% confidence interval [CI], 1.97-5.77; P < .001). These results were confirmed after adjustment for age, HIV, hepatitis C virus (HCV), and inhibitor in a Cox regression model (HR, 2.65; 95% CI, 1.62-4.33; P < .001). The survival analysis of time to joint arthroplasty in the subset of patients with severe HA was not affected by the severity of factor VIII (FVIII) gene mutations. A systematic review of literature articles reporting joint arthroplasties in HA and HB showed that the proportion of HA patients who had undergone arthroplasties was higher than that of HB patients, in agreement with the findings in our Italian cohort. These data suggest that the 2 inherited coagulation disorders have a different severity of clinical phenotype.

Nanotechnology makes biomass electrolysis more energy efficient than water electrolysis

The energetic convenience of electrolytic water splitting is limited by thermodynamics. Consequently, significant levels of hydrogen production can only be obtained with an electrical energy consumption exceeding 45 kWh kg(-1)H2. Electrochemical reforming allows the overcoming of such thermodynamic limitations by replacing oxygen evolution with the oxidation of biomass-derived alcohols. Here we show that the use of an original anode material consisting of palladium nanoparticles deposited on to a three-dimensional architecture of titania nanotubes allows electrical energy savings up to 26.5 kWh kg(-1)H2 as compared with proton electrolyte membrane water electrolysis. A net energy analysis shows that for bio-ethanol with energy return of the invested energy larger than 5.1 (for example, cellulose), the electrochemical reforming energy balance is advantageous over proton electrolyte membrane water electrolysis.

Tissue Persistence of Parvovirus B19 Genotypes in Asymptomatic Persons

Parvovirus B19 (B19V) can persist in immunocompetent symptomatic and non‐symptomatic individuals, as demonstrated by the finding of viral DNA in different tissues, in absence of viremia and of anti‐B19V IgM. The spread and the nature of this phenomenon have not been clearly determined. In order to investigate the frequency of persistence and the tissue distribution of the three genotypes of B19V, the viral load of the persistent virus and its expression in the affected tissues, 139 tissue samples and 102 sera from 139 asymptomatic individuals have been analyzed by consensus PCRs and genotype specific PCRs for B19V detection and genotyping. Viral load was measured by real time PCR and viral mRNAs were detected by RT‐PCR. Altogether, 51% individuals carried B19V DNA, more frequently in solid tissues (65%) than in bone marrow (20%). Genotype 1 was found in 28% tissue samples, genotype 2 in 68% and genotype 3 in 3% only. Viral load ranged from less then 10 copies to 7 × 104 copies per 106 cells, with the exception of two samples of myocardium with about 106 copies per 106 cells. mRNA of capsid proteins was present in two bone marrow samples only. In conclusion, in asymptomatic individuals B19V persistence is more common in solid tissues than in bone marrow, and genotype 2 persists more frequently than genotype 1. The results suggest that the virus persists without replicating, at sub‐immunogenic levels. J. Med. Virol. 80:2005–2011, 2008.

Formation of ZnSe on Ag(111) by electrochemical atomic layer epitaxy

ZnSe is an ideal candidate for optoelectronic devices. However, modern technology is quite demanding as to the quality of materials employed. The electrochemical atomic layer epitaxy (ECALE) method ensures good atomic-level control of thin film formation, as it is based on the alternated deposition of atomic layers of the elements making up the compound. The electrochemical conditions necessary to form ZnSe deposits of up to 35 Zn layers and 35 Se layers on Ag(111) by ECALE are described here. The 1:1 stoichiometric ratio of Zn to Se suggests that ZnSe is formed. A miniaturized electrochemical cell is also described.

CdS and ZnS Deposition on Ag(111) by Electrochemical Atomic Layer Epitaxy

We applied the electrochemical atomic layer epitaxy (ECALE) methodology to obtain deposits of CdS and ZnS on Ag (111) by alternate underpotential deposition of the elements forming the compounds. The amounts of the elements deposited, determined by stripping coulometry, always yielded a stoichiometric 1:1 ratio. The deposits were formed using an automated electrochemical deposition system, described here, making use of a simple distribution valve.

Energy Efficiency Enhancement of Ethanol Electrooxidation on Pd–CeO2/C in Passive and Active Polymer Electrolyte‐Membrane Fuel Cells

Pd nanoparticles have been generated by performing an electroless procedure on a mixed ceria (CeO(2))/carbon black (Vulcan XC-72) support. The resulting material, Pd-CeO(2)/C, has been characterized by means of transmission electron microscopy (TEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and X-ray diffraction (XRD) techniques. Electrodes coated with Pd-CeO(2)/C have been scrutinized for the oxidation of ethanol in alkaline media in half cells as well as in passive and active direct ethanol fuel cells (DEFCs). Membrane electrode assemblies have been fabricated using Pd-CeO(2)/C anodes, proprietary Fe-Co cathodes, and Tokuyama anion-exchange membranes. The monoplanar passive and active DEFCs have been fed with aqueous solutions of 10 wt% ethanol and 2 M KOH, supplying power densities as high as 66 mW cm(-2) at 25 °C and 140 mW cm(-2) at 80 °C. A comparison with a standard anode electrocatalyst containing Pd nanoparticles (Pd/C) has shown that, at even metal loading and experimental conditions, the energy released by the cells with the Pd-CeO(2)/C electrocatalyst is twice as much as that supplied by the cells with the Pd/C electrocatalyst. A cyclic voltammetry study has shown that the co-support ceria contributes to the remarkable decrease of the onset oxidation potential of ethanol. It is proposed that ceria promotes the formation at low potentials of species adsorbed on Pd, Pd(I)-OH(ads), that are responsible for ethanol oxidation.

Electrochemical aspects of CdTe growth on the face (111) of silver by ECALE

CdTe deposition on Ag(111) was obtained by Electrochemical Atomic Layer Epitaxy (ECALE) method, that is by the alternated underpotential deposition of tellurium and cadmium. The voltammetric analysis of the first TeUPD and CdUPD peaks indicates a mechanism of two-dimensional growth, which is consistent with an epitaxial growth. The ratio Cd:Te determined on the basis of electrochemical measurements is very close to the 1:1 stoichiometric ratio, which is indicative of a compound formation.

Electrochemical milling and faceting: Size reduction and catalytic activation of palladium nanoparticles

Improved performance through milling: A method for enhancing the catalytic activity of supported metal nanoparticles is reported. This method enhances the activity for the ethanol electro-oxidation of a supported palladium catalyst. The much higher catalytic performance is ascribed to the increased electrochemically active surface area as well as the generation of high-index facets at the milled nanoparticle surface.

Trace Copper(II) or Zinc(II) Ions Drastically Modify the Aggregation Behavior of Amyloid-beta(1-42): An AFM Study

Formation of amyloid-beta (Abeta){1-42} amyloid fibrils, a characteristic feature of Alzheimers disease (AD), was monitored in situ through atomic force microscopy (AFM). Well-structured amyloid fibrils slowly formed in solution within 24 hours for which high quality AFM pictures could be obtained. Remarkably, addition of either copper(II) or zinc(II) ions to the incubation medium, even at extremely low molar ratios, dramatically changed the Abeta {1-42} aggregation profile and prevented fibril formation. Aggregates of different morphology appeared in accordance with previous observations: small globular aggregates upon addition of zinc; ill-structured micro-aggregates in the case of copper. The implications of these AFM results are discussed in the context of current concepts for AD metallobiology.