Matthew Finkelman

Structure and diagnosis of adult attention-deficit/hyperactivity disorder: analysis of expanded symptom criteria from the Adult ADHD Clinical Diagnostic Scale.

CONTEXT Controversy exists about the appropriate criteria for a diagnosis of adult attention-deficit/hyperactivity disorder (ADHD). OBJECTIVE To examine the structure and symptoms most predictive of DSM-IV adult ADHD. DESIGN The data are from clinical interviews in enriched subsamples of the National Comorbidity Survey Replication (n = 131) and a survey of a large managed health care plan (n = 214). The physician-administered Adult ADHD Clinical Diagnostic Scale (ACDS) was used to assess childhood ADHD and expanded symptoms of current adult ADHD. Analyses examined the stability of symptoms from childhood to adulthood, the structure of adult ADHD, and the adult symptoms most predictive of current clinical diagnoses. SETTING The ACDS was administered telephonically by clinical research interviewers with extensive experience in the diagnosis and treatment of adult ADHD. PARTICIPANTS An enriched sample of community respondents. MAIN OUTCOME MEASURE Diagnoses of DSM-IV /ACDS adult ADHD. RESULTS Almost half of the respondents (45.7%) who had childhood ADHD continued to meet the full DSM-IV criteria for current adult ADHD, with 94.9% of these patients having current attention-deficit disorder and 34.6% having current hyperactivity disorder. Adult persistence was much greater for inattention than for hyperactivity/impulsivity. Additional respondents met the full criteria for current adult ADHD despite not having met the full childhood criteria. A 3-factor structure of adult symptoms included executive functioning (EF), inattention/hyperactivity, and impulsivity. Stepwise logistic regression found EF problems to be the most consistent and discriminating predictors of adult DSM-IV /ACDS ADHD. CONCLUSIONS These findings document the greater persistence of inattentive than of hyperactive/impulsive childhood symptoms of ADHD in adulthood but also show that inattention is not specific to ADHD because it is strongly associated with other adult mental disorders. In comparison, EF problems are more specific and consistently important predictors of DSM-IV adult ADHD despite not being in the DSM-IV, suggesting that the number of EF symptoms should be increased in the DSM-V/ICD-11.

Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique.

STATEMENT OF PROBLEM The accuracy of chairside computer-aided design and computer-aided manufacturing (CAD/CAM) restorations is questionable, and the effect of the die spacer settings is not well stated in the literature. PURPOSE The purpose of the study was to evaluate the marginal and internal adaptation of E4D crowns fabricated with different spacer thicknesses and to compare these crowns with those fabricated with the heat-press technique. MATERIAL AND METHODS The E4D system was used to fabricate 30 crowns for the first 3 groups, with different spacer thickness settings: 30 μm, 60 μm, and 100 μm. In the fourth group, 10 lithium disilicate crowns were fabricated with the heat-press technique. The occlusal gap, axial gap, vertical marginal gap, and absolute marginal discrepancy were evaluated by x-ray microtomography. Statistical significance was assessed with the Kruskal-Wallis test (α=.05). For post hoc analyses, the Mann-Whitney U test was used alongside the Bonferroni correction for multiple comparisons (α=.008). RESULTS Within the CAD/CAM groups, the 30-μm spacer thickness resulted in the lowest median axial gap (90.04 μm), whereas the 60-μm spacer thickness resulted in the lowest median occlusal gap (152.39 μm). The median marginal gap values of the CAD/CAM-60 group (49.35 μm) and CAD/CAM-100 group (46.65 μm) were lower than those of the CAD/CAM-30 group (55.18 μm). No significant differences among the CAD/CAM groups were observed for absolute marginal discrepancy. The heat-press group had significantly different values than those of the CAD/CAM groups. CONCLUSION The spacer thickness and fabrication technique affected the adaptation of ceramic crowns. The heat-press group yielded the best marginal and internal crown adaptation results. The 30- or 60-μm spacer settings are recommended for the E4D CAD/CAM system.

Item Selection and Hypothesis Testing for the Adaptive Measurement of Change

Assessing individual change is an important topic in both psychological and educational measurement. An adaptive measurement of change (AMC) method had previously been shown to exhibit greater efficiency in detecting change than conventional nonadaptive methods. However, little work had been done to compare different procedures within the AMC framework. This study introduced a new item selection criterion and two new test statistics for detecting change with AMC that were specifically designed for the paradigm of hypothesis testing. In two simulation sets, the new methods for detecting significant change improved on existing procedures by demonstrating better adherence to Type I error rates and substantially better power for detecting relatively small change.

Attention deficit hyperactivity disorder: concordance of the adolescent version of the Composite International Diagnostic Interview Version 3.0 (CIDI) with the K-SADS in the US National Comorbidity Survey Replication Adolescent (NCS-A) supplement

This paper evaluates the internal consistency reliability and concurrent validity of the assessment of Diagnostic and Statistical Manual of Mental Disorders (DSM‐IV) attention deficit hyperactivity disorder (ADHD) in the adolescent version of the World Health Organization (WHO) Composite International Diagnostic Interview Version 3.0 (CIDI). The CIDI is a lay‐administered diagnostic interview that was carried out in conjunction with the US National Comorbidity Survey Adolescent Supplement, a US nationally representative survey of 10,148 adolescents and their parents. Internal consistency reliability was evaluated using factor and item response theory analyses. Concurrent validity was evaluated against diagnoses based on blinded clinician‐administered interviews. Inattention and hyperactivity‐impulsivity items loaded on separate but correlated factors, with hyperactivity and impulsivity items forming a single factor in parent reports but separate factors in youth reports. We were able to differentiate hyperactivity and impulsivity factors for parents as well by eliminating a subset who endorsed zero ADHD items from the factor analysis. Although concurrent validity was relatively weak, decomposition showed that this was due to low validity of adolescent reports. A modified CIDI diagnosis based exclusively on parent reports generated a diagnosis that had good concordance with clinical diagnoses [area under the curve (AUC) = 0.78]. Implications for assessing ADHD using the CIDI and the effect of different informants on measurement are discussed. Copyright

An In Vitro Comparison of Shear Bond Strength of Zirconia to Enamel Using Different Surface Treatments

PURPOSE The purpose of this in vitro study was to compare the shear bond strength of an airborne-particle abraded zirconia, an acid-etched zirconia (Piranha solution), an Alloy Primer treated zirconia, and a silaned zirconia to enamel, all bonded with a phosphate-methacrylate resin luting agent. MATERIALS AND METHODS Seventy extracted intact human molars were collected, cleaned, and mounted in autopolymerizing acrylic resin, with the experimental surface of the teeth exposed. The specimens were randomly divided into seven groups of zirconia specimens (4 mm diameter, 2 mm thick). Group 1: Airborne-particle abrasion; group 2: Airborne-particle abrasion and Z-PRIME Plus; group 3: Airborne-particle abrasion and alloy primer; group 4: Piranha solution 7:1; group 5: Piranha solution 7:1 and Z-PRIME Plus; group 6: Piranha solution 7:1 and Alloy primer; group 7: CoJet and silane. All specimens were luted with a phosphate-methacrylate resin luting agent (Panavia F2.0) and stored in distilled water for 1 day, then thermocycled (5°C and 55°C) for 500 cycles and tested for shear bond strength (SBS), measured in MPa, with a universal testing machine at a 0.55 mm/min crosshead speed. All specimens were inspected under a scanning electron microscope to determine mode of failure. The mean values and standard deviations of all specimens were calculated for each group. A one-way ANOVA was performed, and multiple pairwise comparisons were then completed with post hoc Tukey test (alpha = 0.05). RESULTS The airborne-particle abrasion and Z-PRIME Plus group resulted in a significantly higher SBS than the other groups (21.11 ± 6.32 MPa) (p < 0.001). The CoJet and silane group (15.99 ± 8.92 MPa) and airborne-particle abrasion and alloy primer group (11.07 ± 4.34 MPa) showed high shear bond strength but not statistically significant from the airborne-particle abrasion group (14.23 ± 5.68 MPa). Failure mode was predominately mixed in groups 1, 2, 3, and 7 with islands of retained resin on the zirconia and enamel surfaces; however, groups 4, 5, and 6 showed mostly adhesive failures, which left the zirconia surface free of the adhesive materials. No cohesive failures of the substrates (ceramic, resin, or enamel) were observed. CONCLUSION Airborne-particle abrasion followed by the application of a zirconia primer produced the highest bond strength to enamel. Therefore, it can be recommended as a promising surface treatment method to achieve a durable bond to densely sintered zirconia ceramics.

Rubber dam use during post placement influences the success of root canal-treated teeth.

INTRODUCTION Salivary leakage after root canal therapy is of great concern and can lead to failure of the endodontic therapy. The aim of this study was to investigate whether the use of a rubber dam (RD) during post placement impacts the success of root canal-treated teeth. METHODS Retrospective chart reviews of 185 patients with an average recall of 2.7 years were assessed for the incidence of a new periapical lesion (periapical index score >2) after root canal therapy and post placement. The patients were divided into 2 groups based on the presence or absence of an RD clamp in the verification radiograph during post placement. RESULTS Twenty-six patients (30 teeth) had a post placed with the use of an RD, and 159 patients (174 teeth) had a post placed without an RD. In the non-RD group, 128 (73.6%) teeth were considered successful at follow-up. In the RD group, 28 (93.3%) teeth were considered successful at follow-up. Based on the bivariate GEE model, the difference in success between these 2 groups was statistically significant (P = .035). CONCLUSIONS The use of an RD during prefabricated post placement provides a significantly higher success rate of root canal-treated teeth. Using an RD is already considered a standard of care for nonsurgical root canal therapy; in addition, using an RD during restorative procedures that involve open teeth should also become a standard of care.

Comparison of Treatment Outcomes Associated With Early Versus Late Treatment of Mandible Fractures: A Retrospective Chart Review and Analysis

PURPOSE We conducted outcomes assessment for all patients who had undergone treatment of mandible fractures at Tufts Medical Center across the 2 specialties of oral and maxillofacial surgery and otolaryngology. The aim of the present study was to determine whether a correlation existed between the development of postoperative complications and late treatment of mandible fractures (defined as treatment provided >48 hours after the time of injury). PATIENTS AND METHODS All patients with mandible fractures treated at Tufts Medical Center between January 1, 2003 and January 1, 2008, underwent chart review to document the relevant data, including the time of fracture, time of treatment, and complications recorded during postoperative follow-up. The only patients included in the review were those who had follow-up data with good documentation. RESULTS Our dataset included 92 patients, with a mean age of 28.74 years. The injury scores, compared between the early and late treatment and complication and noncomplication groups, were equivocal. Of our 92 treated patients, 19 (20.7%) had ≥1 postoperative complication. Of the 19 patients with any complication, 10 had undergone early treatment and 9 had been treated after 48 hours. Of our late treatment group, 25% developed ≥1 complication. The overall complication rate for the early group was 18%. CONCLUSIONS Our study did not reveal a statistically significant difference in the development of postoperative complications after mandible fracture repair between the early and late treatment groups. Our study seemed to have a result similar to that of some of the earlier studies investigating the same variable.

The computerized adaptive diagnostic test for major depressive disorder (CAD-MDD): a screening tool for depression.

OBJECTIVE To develop a computerized adaptive diagnostic screening tool for depression that decreases patient and clinician burden and increases sensitivity and specificity for clinician-based DSM-IV diagnosis of major depressive disorder (MDD). METHOD 656 individuals with and without minor and major depression were recruited from a psychiatric clinic and a community mental health center and through public announcements (controls without depression). The focus of the study was the development of the Computerized Adaptive Diagnostic Test for Major Depressive Disorder (CAD-MDD) diagnostic screening tool based on a decision-theoretical approach (random forests and decision trees). The item bank consisted of 88 depression scale items drawn from 73 depression measures. Sensitivity and specificity for predicting clinician-based Structured Clinical Interview for DSM-IV Axis I Disorders diagnoses of MDD were the primary outcomes. Diagnostic screening accuracy was then compared to that of the Patient Health Questionnaire-9 (PHQ-9). RESULTS An average of 4 items per participant was required (maximum of 6 items). Overall sensitivity and specificity were 0.95 and 0.87, respectively. For the PHQ-9, sensitivity was 0.70 and specificity was 0.91. CONCLUSIONS High sensitivity and reasonable specificity for a clinician-based DSM-IV diagnosis of depression can be obtained using an average of 4 adaptively administered self-report items in less than 1 minute. Relative to the currently used PHQ-9, the CAD-MDD dramatically increased sensitivity while maintaining similar specificity. As such, the CAD-MDD will identify more true positives (lower false-negative rate) than the PHQ-9 using half the number of items. Inexpensive (relative to clinical assessment), efficient, and accurate screening of depression in the settings of primary care, psychiatric epidemiology, molecular genetics, and global health are all direct applications of the current system.

Salivary Cortisol, Salivary Alpha Amylase, and the Dental Anxiety Scale

The aim of this study was to investigate the correlation between dental anxiety, salivary cortisol, and salivary alpha amylase (sAA) levels. Furthermore, the aim was to look into individual differences such as age, race, gender, any existing pain, or traumatic dental experience and their effect on dental anxiety. This study followed a cross-sectional design and included a convenience sample of 46. Every patient was asked to complete the Dental Anxiety Scale (DAS) and a basic demographic/dental history questionnaire. A saliva sample, utilizing the method of passive drooling, was then collected in 2-mL cryovials. Samples were analyzed for salivary cortisol and sAA levels by Salimetrics. Significant associations were observed between DAS scores and presence of pain and history of traumatic dental experience. However, no significant correlations were observed between DAS, cortisol, and sAA levels. Our study reconfirms that dental anxiety is associated with presence of pain and a history of traumatic dental experience. On the other hand, our study was the first to our knowledge to test the correlation between the DAS and sAA; nevertheless, our results failed to show any significant correlation between dental anxiety, cortisol, and sAA levels.

Curtailment and Stochastic Curtailment to Shorten the CES-D

The Center for Epidemiologic Studies–Depression (CES-D) scale is a well-known self-report instrument that is used to measure depressive symptomatology. Respondents who take the full-length version of the CES-D are administered a total of 20 items. This article investigates the use of curtailment and stochastic curtailment (SC), two sequential analysis methods that have recently been proposed for health questionnaires, to reduce the respondent burden associated with taking the CES-D. A post hoc simulation based on 1,392 adolescents’ responses to the CES-D was used to compare these methods with a previously proposed computerized adaptive testing (CAT) approach. Curtailment lowered average test lengths by as much as 22% while always matching the classification decision of the full-length CES-D. SC and CAT achieved further reductions in average test length, with SC’s classifications exhibiting more concordance with the full-length CES-D than do CAT’s. Advantages and disadvantages of each method are discussed.