Matthew J. Reno

Analysis of PV Advanced Inverter Functions and Setpoints under Time Series Simulation.

Utilities are increasingly concerned about the potential negative impacts distributed PV may have on the operational integrity of their distribution feeders. Some have proposed novel methods for controlling a PV systems grid - tie inverter to mitigate poten tial PV - induced problems. This report investigates the effectiveness of several of these PV advanced inverter controls on improving distribution feeder operational metrics. The controls are simulated on a large PV system interconnected at several locations within two realistic distribution feeder models. Due to the time - domain nature of the advanced inverter controls, quasi - static time series simulations are performed under one week of representative variable irradiance and load data for each feeder. A para metric study is performed on each control type to determine how well certain measurable network metrics improve as a function of the control parameters. This methodology is used to determine appropriate advanced inverter settings for each location on the f eeder and overall for any interconnection location on the feeder.

Distribution system low-voltage circuit topology estimation using smart metering data

Operating distribution systems with a growing number of distributed energy resources requires accurate feeder models down to the point of interconnection. Many of the new resources are located in the secondary low-voltage distribution circuits that typically are not modeled or modeled with low level of detail. This paper presents a practical and computational efficient approach for estimating the secondary circuit topologies from historical voltage and power measurement data provided by smart meters and distributed energy resource sensors. The accuracy of the algorithm is demonstrated on a 66- node test circuit utilizing real AMI data. The algorithm is also utilized to estimate the secondary circuit topologies of the Georgia Tech distribution system. Challenges and practical implementation approaches of the algorithm are discussed. The paper demonstrates the computational infeasibility of exhaustive secondary circuit topology estimation approaches and presents an efficient algorithm for verifying whether two radial secondary circuits have identical topologies.

High temporal resolution load variability compared to PV variability

While solar variability has often been quantified and its impact to distribution grids simulated, load variability, especially high-frequency (e.g., 1-second) load variability, has been given less attention. The assumption has often been made that high-frequency load variability is much smaller than PV variability, but with little evidence. Here, we compare load and PV variability using 1-second measurements of each. The impact on voltage regulator tap change operations of using low-resolution (e.g., 15- or 30-minute) interpolated load profiles instead of 1- second is quantified. Our results generally support the assumption that distribution feeder aggregate PV variability is much greater than aggregate load variability.

Advanced inverter controls to dispatch distributed PV systems

The research presented in this paper compares five real-time control strategies for the power output of a large number of distributed PV systems in a large distribution feeder circuit. Both real and reactive power controls are considered with the goal of minimizing network over-voltage violations caused by high penetrations of PV generation. The control parameters are adjusted to maximize the effectiveness of each control. The controls are then compared based on their ability to achieve multiple objectives. These objectives include minimizing the total number of voltage violations, minimizing the total amount of PV energy curtailed or reactive power generated, and maximizing the fairness of any control action among all PV systems. The controls are simulated on the OpenDSS platform using time series load and spatially-distributed irradiance data.

PV ramp rate smoothing using energy storage to mitigate increased voltage regulator tapping

A control algorithm is designed to smooth the variability of PV power output using distributed batteries. The tradeoff between smoothing and battery size is shown. It is also demonstrated that large numbers of highly distributed current, voltage, and irradiance sensors can be utilized to control the distributed storage in a more optimal manner. It is also demonstrated that centralized energy storage control for PV ramp rate smoothing requires very fast communication, typically less than a 15-second update rate. Finally, advanced inverter dynamic reactive current is shown to provide voltage variability smoothing, hence reducing the number of voltage regulator tap changes without energy storage.

Multi-Objective Advanced Inverter Controls to Dispatch the Real and Reactive Power of Many Distributed PV Systems.

The research presented in this report compares several real - time control strategies for the power output of a large number of PV distributed throughout a large distribution feeder circuit. Both real and reactive power controls are considered with the goal of minimizing network over - voltage violations caused by large amounts of PV generation. Several control strategies are considered under various assumptions regarding the existence and latency of a communication network. The control parameters are adjusted to maximize the effectiveness of each control. The controls are then compared based on their ability to achieve multiple objectiv es. These objectives include minimizing the total number of voltage violations , minimizing the total amount of PV energy curtailed or reactive power generated, and maximizing the fairness of any control action among all PV systems . The controls are simulat ed on the OpenDSS platform using time series load and spatially - distributed irradiance data.

Maximum PV size limited by the impact to distribution protection

Utilities issuing new PV interconnection permits must be aware of any risks caused by PV on their distribution networks. One potential risk is the degradation of the effectiveness of the networks protection devices (PDs). This can limit the amount of PV allowed in the network, i.e. the networks PV hosting capacity. This research studies how the size and location of a PV installation can prevent network PDs from operating as intended. Simulations are carried out using data from multiple actual distribution feeders in OpenDSS. The PD TCC are modeled to find the timing of PD tripping to accurately identify when PV will cause unnecessary customer outages. The findings show that more aggressive protection settings limit the amount of PV that can be placed on a network that does not cause more customer outages or damage network equipment.

Multiphase Distribution Feeder Reduction

Quasi-static time-series simulations (QSTS) of distribution feeders are a critical element of distributed solar PV integration studies. QSTS are typically carried out through computer simulation tools, such as OpenDSS. Since a typical feeder contains thousands of buses, for long investigation periods or at fine time scales such simulations are computationally costly. Simulation times are reduced in this paper through a reduction of the number of buses in the model. The feeder reduction algorithm considers p-phase distribution feeders with unbalanced loads and generation, unbalanced wire impedance, and mutual coupling, while preserving the spatial variation of load and generation. An extensive Monte Carlo sensitivity analysis was performed on a real feeder from a California utility. All bus voltage differences are found to be less than 1.13% with a root mean square error of 0.21%. Simulation time savings were up to 96% when only one bus is selected to remain in the model. Example applications of the proposed algorithm are interconnection studies of utility-scale photovoltaic system to the distribution grid, siting analyses of other distributed energy resources and dynamic behavior of devices in large systems, such as smart inverters on distribution grids.

Methods to determine recommended feeder-wide advanced inverter settings for improving distribution system performance

This paper describes methods that a distribution engineer could use to determine advanced inverter settings to improve distribution system performance. These settings are for fixed power factor, volt-var, and volt-watt functionality. Depending on the level of detail that is desired, different methods are proposed to determine single settings applicable for all advanced inverters on a feeder or unique settings for each individual inverter. Seven distinctly different utility distribution feeders are analyzed to simulate the potential benefit in terms of hosting capacity, system losses, and reactive power attained with each method to determine the advanced inverter settings.

Evaluation of communication requirements for voltage regulation control with advanced inverters

A central control algorithm was developed to utilize photovoltaic system advanced inverter functions, specifically fixed power factor and constant reactive power, to provide distribution system voltage regulation and to mitigate voltage regulator tap operations by using voltage measurements at the regulator. As with any centralized control strategy, the capabilities of the control require a reliable and fast communication infrastructure. These communication requirements were evaluated by varying the interval at which the controller sends dispatch commands and evaluating the effectiveness to mitigate tap operations. The control strategy was demonstrated to perform well for communication intervals faster than the delay on the voltage regulator (30 seconds). The communication reliability, latency, and bandwidth requirements were also evaluated.