Matthew M. Tomaino

Scapholunate advanced collapse wrist : proximal row carpectomy or limited wrist arthrodesis with scaphoid excision ?

Proximal row carpectomy (PRC) and limited intercarpal arthrodesis with scaphoid excision (LWF) are useful alternatives to wrist arthrodesis for treatment of degenerative wrist disorders secondary to scapholunate advanced collapse. Because consensus regarding the ideal motion-preserving option is lacking, we sought to better define the indications for and relative merits of PRC versus LWF. Twenty-four wrists treated for symptomatic scapholunate advanced collapse arthritis between 1980 and 1990 with either PRC or LWF were retrospectively reviewed at an average of 5.5 years postoperatively. At follow-up evaluation, satisfactory pain relief, grip strength, and functional performance were observed except in three patients with PRC, one of whom had developed symptomatic radiocarpal arthritis requiring conversion to arthrodesis. Differences in subjective and objective results between the two treatment groups were not statistically significant except for residual range of motion. Incomplete correction of lunate extension when LWF was performed resulted in diminished wrist extension, compared to PRC. Improvements in grip strength and range of motion were noted for at least 1 year after both procedures, and neither declined with time. A stage-dependent surgical approach to the symptomatic scapholunate advanced collapse wrist is advocated in light of comparable outcomes following both PRC and LWF. For wrists without capitolunate arthritis, PRC avoids the technical demands, lengthy postoperative immobilization, and risk of nonunion associated with LWF, but for stage III disease (capitolunate arthritis) pain relief may be unsatisfactory, and LWF is recommended.

Distal radius fractures in older women: a 10-year follow-up study of descriptive characteristics and risk factors. The study of osteoporotic fractures.

OBJECTIVES: To determine the incidence of distal radius fractures and the characteristics of those fractures and to identify the key risk factors.

Perilunate dislocation and fracture dislocation: A critical analysis of the volar-dorsal approach

A combined volar-dorsal approach was used to treat 11 perilunate dislocations and fracture dislocations between 1989 and 1994. The mean average age of the patients was 38 years, and the mean average time between injury and surgery was 13 hours. Outcome was assessed after an average of 30 months. Results were based on measurements of grip strength, range of motion, radiographs, and patient satisfaction. Patient satisfaction was high in 9 of 11 patients. Seven had satisfactory pain relief, and 5 had returned to their previous occupation without limitation. The wrist flexion-extension arc and grip strength averaged 71% and 77%, respectively, compared to the opposite side. Follow-up radiographs demonstrated complete union of all 8 wrist fractures. For all 11 patients, the carpal height ratio averaged 0.50. Neither scapholunate dissociation nor significant dorsal intercalated segmental instability existed, but 1 wrist developed scapholunate advanced collapse arthritis. Although perilunate instability patterns of injury create significant derangement in carpal anatomy and are among the most challenging of traumatic wrist injuries to correct, our results show that a combined volar-dorsal approach can be used safely and effectively to restore normal intercarpal relationships and provide fixation for accompanying fractures. For the majority of patients, the outcome after this procedure is characterized by acceptable pain relief as well as functional motion and grip strength.

Ulnar Impaction Syndrome in the Ulnar Negative and Neutral Wrist Diagnosis and Pathoanatomy

Although the ulnar impaction syndrome occurs most commonly in the ulnar positive wrist, it can also occur in wrists with either ulnar negative or neutral variance. Dynamic increases in ulnar variance may accompany forceful grip and pronation, but diagnosis of the ulnar impaction syndrome can be difficult nonetheless. This report further substantiates the occurrence of this problem in wrists with neutral and negative variance, and provides a description of diagnostic findings and pathoanatomy.

The Effect of Partial Excision of the A2 and A4 Pulleys on the Biomechanics of Finger Flexion

The purpose of this study was to investigate the effect of partial excision of the A2 and A4 pulleys on digital angular rotation and the energy required to flex the finger. Partial excision of A2 resulted in a statistically significant decrease in angular rotation of 3 and 5% after 50 and 75% excision, respectively. Partial excision of A4 failed to produce any significant differences in angular rotation. Combined partial excision of A2 and A4 resulted in a significant decrease of 5 and 8% after 50 and 75% excision, respectively. Significant differences in work of flexion occurred only after excision of 75% of the A2 pulley. Although optimal finger function relies on the integrity of the A2 and A4 pulleys which maintain the efficiency of the digital flexor system, these data suggest that 25% of the A2 pulley, up to 75% of the A4 and 25% of the A2 and A4 together can be excised without significant effects on angular rotation.

Peroneal nerve palsy following knee dislocation: pathoanatomy and implications for treatment

Abstract Peroneal nerve palsy following knee dislocation is a serious problem, and neurolysis at the time of knee reconstruction does not always result in return of peroneal nerve function. We describe peroneal nerve pathoanatomy in three patients in whom late exploration of the peroneal nerve was performed because of ongoing absence of ankle dorsiflexion. We identified frank nerve rupture in two patients and a lengthy neuroma in continuity in one which extended far proximal to the fibular head and well above the previous surgical incision used for peroneal nerve neurolysis at the time of knee reconstruction. In light of the current state of microneural surgery and the potential to reconstruct nerve defects, we discuss how our findings impact on treatment, and provide recommendations which may improve recovery of peroneal nerve function in future cases.

RECONSTRUCTION OF THE INTEROSSEOUS LIGAMENT OF THE FOREARM REDUCES LOAD ON THE RADIAL HEAD IN CADAVERS

Excision of the radial head after fracture may be complicated by longitudinal radio-ulnar instability (Essex-Lopresti lesion) if the forearm interosseous ligament has also been torn. In such cases proximal migration of the radius occurs, and ulnar impaction at the wrist and radiocapitellar contact at the elbow may impair function. Although metal radial head arthroplasties are now used for irreparable radial head fractures, the long-term clinical outcome may still be unsatisfactory because of excessive radiocapitellar load causing pain. Interosseous ligament reconstruction might improve outcome by restoring normal load transfer from the radius to ulna, but the biomechanical effect of reconstruction has not been reported. This study evaluated forearm load transfer following interosseous ligament reconstruction with an Achilles tendon allograft in a cadaveric model with the radial head intact. Interosseous ligament reconstruction reduced proximal radius loading by transferring force to the proximal ulna, but force transfer by the reconstruction was only half that by the intact ligament.

A new methodology to measure load transfer through the forearm using multiple universal force sensors.

Previous approaches to measuring forces in the forearm have made the assumption that forces acting in the radius and ulna are uniaxial near the wrist and elbow. To accurately describe forces in the forearm and the forces in the interosseous ligament, we have developed a new methodology to quantitatively determine the 3-D force vectors acting in forearm structures when a compressive load is applied to the hand. A materials testing machine equipped with a six degree-of-freedom universal force-moment sensor (UFS) was employed to apply a uniaxial compressive force to cadaveric forearms gripped at the hand and humerus. Miniature UFSs were implanted into the distal radius and proximal ulna to measure force vectors there. A 3-D digitizing device was used to measure transformations between UFS coordinate systems, utilized for calculating the force vectors in the distal ulna, proximal radius, and the interosseous ligament (IOL). This method was found to be repeatable to within 3 N, and accurate to within 2 N for force magnitudes. Computer models of the forearm, generated from CT scans, were used to visualize the force vectors in 3-D. Application of this methodology to eight forearm specimens showed that the radius carries most of the load at the wrist while force in the IOL relieves load acting in the radius at the mid-forearm. For a 136 N applied hand force, the force in the IOL was 36 + 21 N. Advantages of this methodology include the determination of 3-D force vectors, especially those in the IOL, as well as computer generated 3-D visualization of results.

Carpal tunnel release for advanced disease in patients 70 years and older: does outcome from the patient's perspective justify surgery?

Because more advanced stages of nerve compression are likely to result in intraneural changes including intrinsic fibrosis and axon loss, we hypothesised that carpal tunnel release for advanced carpal tunnel syndrome might not result in satisfactory resolution of symptoms. We were particularly interested in evaluating a population of elderly patients 70 years and older for whom relief of symptoms is the overwhelming objective of surgery. Our retrospective assessment of symptom resolution and patient satisfaction in 13 patients with advanced carpal tunnel syndrome utilized a validated self-administered questionnaire and revealed minimal symptoms in 11 patients. Although carpal tunnel release is unlikely to result in the total elimination of symptoms when performed in elderly patients with advanced disease, outcome from the patient’s perspective appears to be satisfactory and the surgery quite justified.

The Essex-Lopresti fracture-dislocation Factors in early management and salvage alternatives

Treatment recommendations for the Essex-Lopresti lesion have not come very far in 50 years. Although there have been multiple biomechanical studies, the biomechanics of forearm loading and stability remain somewhat elusive. Clinical studies have yielded some insight, but predictable outcomes are exceptional. More studies are needed to further understand the biomechanics of the forearm and provide a basis for reconstruction of the IOL. Although current clinical studies regarding IOL reconstruction and radial head replacement seem promising, long-term results with substantial patient numbers are needed. In the short term, the Essex-Lopresti lesion continues to challenge clinicians.