Matthew R. Field

Enhanced Charge Carrier Mobility in Two-Dimensional High Dielectric Molybdenum Oxide

We demonstrate that the energy bandgap of layered, high-dielectric α-MoO(3) can be reduced to values viable for the fabrication of 2D electronic devices. This is achieved through embedding Coulomb charges within the high dielectric media, advantageously limiting charge scattering. As a result, devices with α-MoO(3) of ∼11 nm thickness and carrier mobilities larger than 1100 cm(2) V(-1) s(-1) are obtained.

Electrochemical Control of Photoluminescence in Two-Dimensional MoS2 Nanoflakes

Two-dimensional (2D) transition metal dichalcogenide semiconductors offer unique electronic and optical properties, which are significantly different from their bulk counterparts. It is known that the electronic structure of 2D MoS2, which is the most popular member of the family, depends on the number of layers. Its electronic structure alters dramatically at near atomically thin morphologies, producing strong photoluminescence (PL). Developing processes for controlling the 2D MoS2 PL is essential to efficiently harness many of its optical capabilities. So far, it has been shown that this PL can be electrically or mechanically gated. Here, we introduce an electrochemical approach to actively control the PL of liquid-phase-exfoliated 2D MoS2 nanoflakes by manipulating the amount of intercalated ions including Li(+), Na(+), and K(+) into and out of the 2D crystal structure. These ions are selected as they are crucial components in many bioprocesses. We show that this controlled intercalation allows for large PL modulations. The introduced electrochemically controlled PL will find significant applications in future chemical and bio-optical sensors as well as optical modulators/switches.

The anodized crystalline WO3 nanoporous network with enhanced electrochromic properties

We demonstrate that a three dimensional (3D) crystalline tungsten trioxide (WO(3)) nanoporous network, directly grown on a transparent conductive oxide (TCO) substrate, is a suitable working electrode material for high performance electrochromic devices. This nanostructure, with achievable thicknesses of up to 2 μm, is prepared at room temperature by the electrochemical anodization of a RF-sputtered tungsten film deposited on a fluoride doped tin oxide (FTO) conductive glass, under low applied anodic voltages and mild chemical dissolution conditions. For the crystalline nanoporous network with thicknesses ranging from 0.6 to 1 μm, impressive coloration efficiencies of up to 141.5 cm(2) C(-1) are achieved by applying a low coloration voltage of -0.25 V. It is also observed that there is no significant degradation of the electrochromic properties of the porous film after 2000 continuous coloration-bleaching cycles. The remarkable electrochromic characteristics of this crystalline and nanoporous WO(3) are mainly ascribed to the combination of a large surface area, facilitating increased intercalation of protons, as well as excellent continuous and directional paths for charge transfer and proton migration in the highly crystalline material.

Elevated temperature anodized Nb2O5: A photoanode material with exceptionally large photoconversion efficiencies

Here, we demonstrate that niobium pentoxide (Nb(2)O(5)) is an ideal candidate for increasing the efficiencies of dye-sensitized solar cells (DSSCs). The key lies in developing a Nb(2)O(5) crisscross nanoporous network, using our unique elevated temperature anodization process. For the same thicknesses of ∼4 μm, the DSSC based on the Nb(2)O(5) layer has a significantly higher efficiency (∼4.1%) when compared to that which incorporates a titanium dioxide nanotubular layer (∼2.7%). This is the highest efficiency among all of the reported photoanodes for such a thickness when utilizing back-side illumination. We ascribe this to a combination of reduced electron scattering, greater surface area, wider band gap, and higher conduction band edge, as well as longer effective electron lifetimes.

Exfoliation Solvent Dependent Plasmon Resonances in Two-Dimensional Sub-Stoichiometric Molybdenum Oxide Nanoflakes.

Few-layer two-dimensional (2D) molybdenum oxide nanoflakes are exfoliated using a grinding assisted liquid phase sonication exfoliation method. The sonication process is carried out in five different mixtures of water with both aprotic and protic solvents. We found that surface energy and solubility of mixtures play important roles in changing the thickness, lateral dimension, and synthetic yield of the nanoflakes. We demonstrate an increase in proton intercalation in 2D nanoflakes upon simulated solar light exposure. This results in substoichiometric flakes and a subsequent enhancement in free electron concentrations, producing plasmon resonances. Two plasmon resonance peaks associated with the thickness and the lateral dimension axes are observable in the samples, in which the plasmonic peak positions could be tuned by the choice of the solvent in exfoliating 2D molybdenum oxide. The extinction coefficients of the plasmonic absorption bands of 2D molybdenum oxide nanoflakes in all samples are found to be high (ε > 10(9) L mol(-1) cm(-1)). It is expected that the tunable plasmon resonances of 2D molybdenum oxide nanoflakes presented in this work can be used in future electronic, optical, and sensing devices.

Defining the role of humidity in the ambient degradation of few-layer black phosphorus

Few-layer black phosphorus (BP) is an emerging material of interest for applications in electronics. However, lack of ambient stability is hampering its incorporation in practical devices as it demands for an inert operating environment. Here, we study the individual effects of key environmental factors, such as temperature, light and humidity on the deterioration of BP. It is shown that humidity on its own does not cause material degradation. In fact, few-layer BP is employed as a recoverable humidity sensor. This study eliminates humidity as an active parameter in BP degradation. Hence, by simply isolating BP from light, its lifetime can be prolonged even in the presence of O2. As such, this study opens the pathway for devising new strategies for the practical implementation of BP.

Interaction of hydrogen with ZnO nanopowders—evidence of hydroxyl group formation

There have been many investigations to reveal the nature of the hydrogen gas and ZnO nanopowder interaction at elevated temperatures, while at present no conclusive description of such an interaction has been confidently reported. In this work, we demonstrate that a hydroxyl group is formed during this interaction, depending on size and relative crystallinity of nanopowders. Our in situ Raman spectroscopy investigations show that the interaction directly affects the intensity of the Raman signal at 483 cm(-1), relative to the peak at 519 cm(-1). Ex situ x-ray diffraction (XRD) and infrared spectroscopy also show extra peaks at 44° and 1618 cm(-1), respectively, after hydrogenation. These peaks were all identified as surface hydroxyl groups, which can be related to the formation of water on the ZnO nanopowder surfaces.

Self-assembled V2O5 interconnected microspheres produced in a fish-water electrolyte medium as a high-performance lithium-ion-battery cathode

Interconnected microspheres of V2O5 composed of ultra-long nanobelts are synthesized in an environmental friendly way by adopting a conventional anodization process combined with annealing. The synthesis process is simple and low-cost because it does not require any additional chemicals or reagents. Commercial fish-water is used as an electrolyte medium to anodize vanadium foil for the first time. Electron microscopy investigation reveals that each belt consists of numerous nanofibers with free space between them. Therefore, this novel nanostructure demonstrates many outstanding features during electrochemical operation. This structure prevents self-aggregation of active materials and fully utilizes the advantage of active materials by maintaining a large effective contact area between active materials, conductive additives, and electrolyte, which is a key challenge for most nanomaterials. The electrodes exhibit promising electrochemical performance with a stable discharge capacity of 227 mAh·g–1 at 1C after 200 cycles. The rate capability of the electrode is outstanding, and the obtained capacity is as high as 278 at 0.5C, 259 at 1C, 240 at 2C, 206 at 5C, and 166 mAh·g–1 at 10C. Overall, this novel structure could be one of the most favorable nanostructures of vanadium oxide-based cathodes for Li-ion batteries.

Modular Molecules: Site‐Selective Metal Substitution, Photoreduction, and Chirality in Polyoxometalate Hybrids

The first members of a promising new family of hybrid amino acid-polyoxometalates have emerged from a search for modular functional molecules. Incorporation of glycine (Gly) or norleucine (Nle) ligands into an yttrium-tungstoarsenate structural backbone, followed by crystallization with p-methylbenzylammonium (p-MeBzNH3(+)) cations, affords (p-MeBzNH3)6K2(GlyH)[As(III)4(Y(III)W(VI)3)W(VI)44Y(III)4O159(Gly)8(H2O)14]⋅47 H2O (1) and enantiomorphs (p-MeBzNH3)15(NleH)3[As(III)4(Mo(V)2Mo(VI)2)W(VI)44Y(III)4O160(Nle)9(H2O)11][As(III)4(Mo(VI)2W(VI)2)W(VI)44Y(III)4O160(Nle)9(H2O)11] (generically designated 2: L-Nle, 2 a; D-Nle, 2 b). An intensive structural, spectroscopic, electrochemical, magnetochemical and theoretical investigation has allowed the elucidation of site-selective metal substitution and photoreduction of the tetranuclear core of the hybrid polyanions. In the solid state, markedly different crystal packing is evident for the compounds, which indicates the role of noncovalent interactions involving the amino acid ligands. In solution, mass spectrometric and small-angle X-ray scattering studies confirm maintenance of the structure of the polyanions of 2, while circular dichroism demonstrates that the chirality is also maintained. The combination of all of these features in a single modular family emphasizes the potential of such hybrid polyoxometalates to provide nanoscale molecular materials with tunable properties.

Effect of Surface Chemistry on the Fluorescence of Detonation Nanodiamonds

Detonation nanodiamonds (DNDs) have unique physical and chemical properties that make them invaluable in many applications. However, DNDs are generally assumed to show weak fluorescence, if any, unless chemically modified with organic molecules. We demonstrate that detonation nanodiamonds exhibit significant and excitation-wavelength-dependent fluorescence from the visible to the near-infrared spectral region above 800 nm, even without the engraftment of organic molecules to their surfaces. We show that this fluorescence depends on the surface functionality of the DND particles. The investigated functionalized DNDs, produced from the same purified DND as well as the as-received polyfunctional starting material, are hydrogen, hydroxyl, carboxyl, ethylenediamine, and octadecylamine-terminated. All DNDs are investigated in solution and on a silicon wafer substrate and compared to fluorescent high-pressure high-temperature nanodiamonds. The brightest fluorescence is observed from octadecylamine-functionalized particles and is more than 100 times brighter than the least fluorescent particles, carboxylated DNDs. The majority of photons emitted by all particle types likely originates from non-diamond carbon. However, we locally find bright and photostable fluorescence from nitrogen-vacancy centers in diamond in hydrogenated, hydroxylated, and carboxylated detonation nanodiamonds. Our results contribute to understanding the effects of surface chemistry on the fluorescence of DNDs and enable the exploration of the fluorescent properties of DNDs for applications in theranostics as nontoxic fluorescent labels, sensors, nanoscale tracers, and many others where chemically stable and brightly fluorescent nanoparticles with tailorable surface chemistry are needed.