Matthias Gierloff

Orbital floor reconstruction with resorbable polydioxanone implants.

Abstract Many different materials are proposed for reconstruction of traumatic orbital floor defects. Donor-site morbidity of autologous transplants and infections or extrusions of nonresorbable implants lead to a widespread use of resorbable, alloplastic materials such as polydioxanone (PDS). The goal of this study was to evaluate the prevalence of orbital floor fracture–related problems after surgical treatment using PDS. Ophthalmologic and clinical examinations were performed at 194 patients before orbital floor reconstruction, 14 days and 6 months after surgery (approximate defect sizes: <1 cm2, n = 50; 1–2 cm2, n = 97; >2 cm2, n = 47). Clinical findings including the ocular motility, the sensibility of the infraorbital nerve, and the position of the globe were evaluated. For statistical analysis of categorical data, confidence intervals of percentages were determined. Linear relationships between 2 variables were assessed with Pearson correlation analysis. A reduced ocular motility was diagnosed in 60 patients (31%) before surgery; in 14 patients (7%), 2 weeks; and in 10 patients (5%), 6 months after surgery. Infraorbital hypesthesia was found in 120 patients (62%) before surgery; in 47 patients (24%), 2 weeks; and in 35 patients (18%), 6 months after surgery. An enophthalmos was present in 10 patients (5%) before surgery, and in 4 patients (2%), 6 months after surgery. Our data suggest that PDS is a suitable implant for orbital floor reconstruction with acceptable low rates of infraorbital hypesthesia, bulbus motility disturbances, and enophthalmos. Polydioxanone can also be used for orbital floor defects exceeding 2 cm2.

Comparison of two different absorbable membranes for the coverage of lateral osteotomy sites in maxillary sinus augmentation: A preliminary study

INTRODUCTION Barrier membranes, both absorbable and non-absorbable, have been used in sinus augmentation for many years. Some years ago, a new autologous blood substrate called Platelet-Rich-Fibrin (PRF) was introduced, and to date, the supporting effect on bone regeneration has been controversial. This study aimed to evaluate the effect of PRF on bone regeneration when used as a barrier membrane at the lateral osteotomy site in sinus augmentation. MATERIAL AND METHODS Twelve sinuses from six patients requiring bilateral sinus floor augmentation were treated with a two-stage surgical technique using sinus augmentation and implant placement after 5 months. The sinuses were grafted with autologous bone and bone-substitute material (Bio-Oss(®)) mixed in a 1:1 ratio and were covered in a randomized split-mouth design with a PRF or a conventional collagen membrane (Bio-Gide(®)), respectively. Five months later threaded titanium dental implants were inserted and bone specimens harvested with a trephine burr were evaluated histomorphometrically. RESULTS Bone quality seemed to be equal at both sites of the grafted sinuses. Mean vital bone formation after 5 months was 17.0% and 17.2%, for the PRF and collagen sites, respectively. The mean of residual bone-substitute was 15.9% and 17.3% for PRF and collagen, respectively. No local complications, such as dehiscences or membrane exposures, were detected at either site in any of the treated patients. After 12 months all implants reached primary stability in the augmented maxillary sinus floor without any peri-implant tissue inflammation. CONCLUSIONS Within the limits of the study the coverage of the lateral sinus window with two different absorbable membranes has been shown to result in a similar amount of vital bone formation and residual bone-substitute.

Effect of deproteinized bovine bone matrix coverage on the resorption of iliac cortico‐spongeous bone grafts – a prospective study of two cohorts

OBJECTIVES The augmentation of the alveolar ridge using iliac cortico-spongeous bone grafts is routinely used. However, bone grafts show a substantial degree of resorption, which may negatively affect the long-term success of dental implants in the augmented area. The aim of this study was to evaluate the effect of a deproteinized bovine bone matrix coverage on the resorption of iliac bone grafts. MATERIAL AND METHODS Two cohorts consisting of 40 patients who received a vertical augmentation of the alveolar ridge with onlay grafts from the iliac crest were prospectively investigated over a period of 2 years. In half of the patients (n = 40), the grafts were covered by a thin layer of deproteinized bovine bone matrix (DBBM cohort). The other 40 patients received the identical surgical procedure without a DBBM coverage (non-DBBM cohort). The graft height/resorption was radiographically determined immediately after surgery, 6 months, 1 year, and 2 years postoperatively. RESULTS The height of the bone graft 6 months after surgery accounted 92.15% of the initial value in the DBBM cohort and 87.76% in the non-DBBM cohort. One year after augmentation, the height reduced to 83.95% in the DBBM cohort and 72.92% in the non-DBBM cohort. Two years after surgery, the resorption slowed down and the height of the grafts accounted 81.27% in the DBBM cohort and 71.43% in the non-DBBM cohort. The difference was statistically significant. CONCLUSION Deproteinized bovine bone matrix reduces the postoperative resorption of iliac bone block grafts and may therefore enhance the long-term implant prognosis in the augmented area.

Isolation, characterization and investigation of differentiation potential of human periodontal ligament cells and dental follicle progenitor cells and their response to BMP-7 in vitro

AbstractThe aim of this study was to assess the factors, mechanisms and the differences between periodontal ligament (PDL) cells and denta l follicle (DF) progenitor cells towards the osteoblastic/cementoblastic differentiation and to investigate the effects of BMP-7 on developmental (DF) and mature tissue-derived (PDL) cells, respectively. Primary cell culture of PDL cells and DF progenitor cells was performed. Osteogenic differentiation was evaluated using von Kossa, Alizarin Red S and immuno-histo-chemistry staining of osteocalcin. Gene expression pattern was evaluated via real-time PCR. A series of CD surface marks were tested using flow cytometry and fluorescence-activated cell-sorting analysis was performed. Real-time RT-PCR demonstrated similar gene expression pattern of PDL cells and DF progenitor cells: the expression of OPN and OCN significantly was elevated when incubated with osteogenic components, Runx2 was unaffected, and Osteorix was hardly expressed whether in basic medium or induction medium. In addition, BMP-7 induced osteoblast/cementoblast differentiation of PDLSCs and DF progenitor cells in a dose- and time-dependent manner, as reflected by enhanced Runx2 and (OCN) mRNA transcript expression. BMP-7 triggers PDL cells and DF progenitor cells to differentiate towards an osteoblast/cementoblast phenotype.

In vitro comparison of different carrier materials with rat bone marrow MSCs

ObjectivesInjectable or implantable scaffolds seeded with autologous chondrogenic cells may represent a promising option for treatment of cartilage defects in the future. Current problems with the autologous chondrocyte implantation including dedifferentiation and the development of fibrocartilage suggest the use of alternative chondrogenic cell sources such as mesenchymal stromal cells (MSCs). The aim of this study was to compare the early effects of different scaffolds on the proliferation and metabolic activity of chondrogenic MSCs in vitro.Materials and methodsMultipotent stromal cells were isolated from rat bone marrow, phenotyped by flow cytometry, and differentiated into distinct lineages proved by lineage-specific staining and gene expression (RT-PCR) pattern. Cell proliferation on Tutodent® Membrane, Bio-Gide®, TissuFleece E, and Belotero® Soft was quantified by the MTT and WST-1 assay and direct determination of total cell numbers. Potential cytotoxic effects of eluates obtained from the materials were quantified by lactate dehydrogenase (LDH) and 5-bromo-2-deoxyuridine (BrdU) assay.ResultsTissuFleece E displayed the best results regarding cell proliferation on the biomaterials and metabolic activity (MTT, WST-1) (p < 0.001). Yet, the eluates of TissuFleece E caused an increased LDH release and lower values in the BrdU test. Cell proliferations on Bio-Gide®, Tutodent® Membrane, and Belotero® Soft were similar to the control. The eluates of Belotero® Soft exhibited the highest LDH release and lowest values in the BrdU assay (p < 0.05).ConclusionsOur results support the use of Tissufleece E as scaffold for chondrogenic rat MSCs. However, it should be prewashed with culture medium before seeding of the cells.Clinical relevanceTissufleece E may serve as a promising carrier material for chondrogenic MSCs for cartilage tissue engineering attempts.

Improved adipogenic in vitro differentiation: comparison of different adipogenic cell culture media on human fat and bone stroma cells for fat tissue engineering

To date there is no sufficient in vitro fat tissue engineering and a protocol has not been well established for this purpose. Therefore, we evaluated the in vitro influence of two different adipogenic growth media for their stimulation potential on different cell lineages to clearly define the most potent adipogenic growth media for future in vitro tissue engineering approaches. The samples for differentiation were composed of human adipogenic-derived stroma cells (hADSCs) and human bone marrow mesenchymal stroma cells (hMSCs). A normal adipogenic medium (NAM) and a specific adipogenic medium (SAM) were tested for their adipogenic stimulation potential. After 10 days and 21 days the relative gene expression was measured for the adipogenic marker genes PPARγ2, C/EBPα, FABP4, LPL, and GLUT4 detected through real time reverse transcriptase polymease chain reaction (RT-PCR). Other study variables were the comparison between NAM and SAM and between the used cells hADSCs and hMSCs. Additionally an Oil-Red staining was performed after 21 days. Our results revealed that only SAM was significantly (P<0.05) superior in the differentiation process in contrast to NAM for 10 days and 21 days. As well was SAM superior to differentiate the used cell lineages. This was evaluated by the detected marker genes PPARγ2, C/EBPα, FABP4, LPL, and GLUT4 through real time RT-PCR and by Oil-Red staining. In addition, the hMSCs proofed to be equal donor cells for adipogenic differentiation especially when stimulated by SAM. The results suggest that the SAM should be established as a new standard medium for a more promising in vitro adipogenic differentiation.

Distraction histogenesis of the maxillofacial region.

The changes in the surrounding soft tissues during long bone distraction in orthopedic surgery have been the subject of several reports, studies on changes in the craniofacial region, in which various tissues, including the skin, muscle, tendon, blood vessel, and gingiva are rare. Therefore, there is a need for studies on the soft tissue aspects of bone lengthening of the craniofacial region. The aim of this review was to address this issue by reviewing the literature about the distraction histogenesis of various tissues, including skin, muscle, blood vessel, nerve, and gingiva.

In Vitro Assessment of Primary Stability of BoneTrust Sinus Implant Design.

The aim of this study was to analyze the primary stability of BoneTrust Sinus implants (BTSIs), which are intended to enable higher primary stability by their special design with reduced thread section in cases of reduced vertical bone availability, in comparison with standard BoneTrust implants (SBTIs) in vitro. A bone window 3 cm in length, 4 cm in width, and 3 cm in depth, resembling the maxillary bone window of the lateral sinus wall with 4 mm of residual bone height, was prepared at the dorsal side of freshly slaughtered bovine ribs. One single BTSI and a single SBTI with the same diameter (4 or 5 mm) were placed in each window. After implant placement, the implant stability quotient (ISQ) was measured by using resonance frequency analysis with an Osstell device. A total of 88 implants were placed. ISQ values varied between 63 and 84. Among the implants with 4-mm diameter, all BTSIs showed higher ISQ values compared with SBTIs. One-way analysis of variance showed a significant difference between BTSIs/SBTIs (P < .05). BTSIs with 4-mm diameter showed statistically higher values compared to BTSIs with 5-mm diameter (P < .05). Among the implants with 5-mm diameter, all SBTIs showed higher ISQ values compared to BTSIs but there was no significant difference. The use of 4-mm-diameter BTSIs could present higher ISQ values during simultaneous implant placement in conjunction with lateral sinus floor augmentation.