Maurizio Dallera

Fungal Contamination in Hospital Environments

OBJECTIVES To assess the degree of fungal contamination in hospital environments and to evaluate the ability of air conditioning systems to reduce such contamination. METHODS We monitored airborne microbial concentrations in various environments in 10 hospitals equipped with air conditioning. Sampling was performed with a portable Surface Air System impactor with replicate organism detection and counting plates containing a fungus-selective medium. The total fungal concentration was determined 72-120 hours after sampling. The genera most involved in infection were identified by macroscopic and microscopic observation. RESULTS The mean concentration of airborne fungi in the set of environments examined was 19 +/- 19 colony-forming units (cfu) per cubic meter. Analysis of the fungal concentration in the different types of environments revealed different levels of contamination: the lowest mean values (12 +/- 14 cfu/m(3)) were recorded in operating theaters, and the highest (45 +/- 37 cfu/m(3)) were recorded in kitchens. Analyses revealed statistically significant differences between median values for the various environments. The fungal genus most commonly encountered was Penicillium, which, in kitchens, displayed the highest mean airborne concentration (8 +/- 2.4 cfu/m(3)). The percentage (35%) of Aspergillus documented in the wards was higher than that in any of the other environments monitored. CONCLUSIONS The fungal concentrations recorded in the present study are comparable to those recorded in other studies conducted in hospital environments and are considerably lower than those seen in other indoor environments that are not air conditioned. These findings demonstrate the effectiveness of air-handling systems in reducing fungal contamination.

Evaluation of the risk of infection through exposure to aerosols and spatters in dentistry

BACKGROUND Many dental procedures produce extensive aerosols and splatters that are routinely contaminated with microorganisms. METHODS Air containing blood-bearing aerosols and surfaces contaminated by sedimenting blood particulate was sampled in 5 different dental cubicles. To assess contamination by blood particulate, the concentration of hemoglobin (Hb) in the air and on the sedimentation surfaces was determined. RESULTS The mean concentration of Hb in the air aspirated in the 5 cubicles was 0.14 +/- 0.23 microg/m(3), corresponding to a blood volume of 8.7 x 10(-4) microL/m(3). Similarly, the mean concentration of blood particulate sedimented on surfaces was calculated and found to be 1.56 microL/m(2). In 80% of the cubicles monitored, 100% positivity to the Hb determination test was recorded in all of the surface samples. CONCLUSIONS The results obtained revealed contamination of both air and surfaces by blood particulate. Moreover, with the exception of those obtained in 1 cubicle, all of the samples of sedimenting particulate analyzed were positive for the presence of Hb.

Evaluation of contamination by blood aerosols produced during various healthcare procedures

This study aimed to quantify the blood content of aerosols produced during dental, maxillofacial and autopsy procedures and to identify those activities which involve the greatest risk of infection due to exposure to blood-containing aerosols. A total of 132 air samples were taken in several dental cubicles, a maxillofacial operating theatre and an autopsy room. The concentration of haemoglobin (Hb) in the samples was quantified and, for each day of sampling, the concentration of blood/m(3) of air aspirated (muL blood/m(3) air) was calculated. Hb was detected in 38.64% of samples. The mean concentration of Hb in the samples was 0.10+/-0.19 microg Hb/m(3) of aspirated air, with a range of 0-0.72 microg Hb/m(3). No statistically significant differences in the concentration of blood aerosol per m(3) of aspirated air were noted among the three types of activity analysed (P>0.05). Although there is, as yet, no concrete proof of the risk of infection through blood-containing aerosols, minimising the production and dispersal of aerosols and spatters is strongly recommended.

Evaluation of environmental contamination by glutaraldehyde in an outpatient facility for digestive endoscopy in an Italian hospital.

The potential harmful effects of glutaraldehyde on human health are well known, and in recent years various new substitutes for this compound have been proposed for the disinfection and thorough sterilization of medical instruments. Nevertheless, glutaraldehyde is still widely used in hospital environments. In order to evaluate environmental contamination by glutaraldehyde vapours, the rooms of a hospital out-patient department of digestive endoscopy were monitored in 2005; a total of 52 samples were taken. The mean environmental concentration of glutaraldehyde was 3.7±7.4 μg/m3. The number of efficacious air exchanges per hour was 6.3 v/h in all of the environments monitored. The study revealed that, in a hospital setting, adequate structural and functional planning, combined with responsible management on the part of the personnel and constant careful checking of the results obtained can minimize the risk of occupational exposure to glutaraldehyde.