Maximiliano Sérgio Cenci

Longevity of posterior composite restorations: Not only a matter of materials

Resin composites have become the first choice for direct posterior restorations and are increasingly popular among clinicians and patients. Meanwhile, a number of clinical reports in the literature have discussed the durability of these restorations over long periods. In this review, we have searched the dental literature looking for clinical trials investigating posterior composite restorations over periods of at least 5 years of follow-up published between 1996 and 2011. The search resulted in 34 selected studies. 90% of the clinical studies indicated that annual failure rates between 1% and 3% can be achieved with Class I and II posterior composite restorations depending on several factors such as tooth type and location, operator, and socioeconomic, demographic, and behavioral elements. The material properties showed a minor effect on longevity. The main reasons for failure in the long term are secondary caries, related to the individual caries risk, and fracture, related to the presence of a lining or the strength of the material used as well as patient factors such as bruxism. Repair is a viable alternative to replacement, and it can increase significantly the lifetime of restorations. As observed in the literature reviewed, a long survival rate for posterior composite restorations can be expected provided that patient, operator and materials factors are taken into account when the restorations are performed.

22-Year clinical evaluation of the performance of two posterior composites with different filler characteristics

OBJECTIVES This retrospective longitudinal study investigated the longevity of posterior restorations placed in a single general practice using 2 different composites in filler characteristics and material properties: P-50 APC (3M ESPE) with 70vol.% inorganic filler loading (midfilled) and Herculite XR (Kerr) with 55vol.% filler loading (minifilled). METHODS Patient records were used for collecting data. Patients with at least 2 posterior composite restorations placed between 1986 and 1990, and still in the practice for regular check-up visits, were selected. 61 patients (20 male, 41 female, age 31.2-65.1) presenting 362 restorations (121 Class I, 241 Class II) placed using a closed sandwich technique were evaluated by 2 operators using the FDI criteria. Data were analyzed with Fishers exact test, Kaplan-Meier statistics, and Cox regression analysis (p<0.05). RESULTS 110 failures were detected. Similar survival rates for both composites were observed considering the full period of observation; better performance for the midfilled was detected considering the last 12 years. There was higher probability of failure in molars and for multi-surface restorations. SIGNIFICANCE Both evaluated composites showed good clinical performance over 22 years with 1.5% (midfilled) and 2.2% (minifilled) annual failure rate. Superior longevity for the higher filler loaded composite (midfilled) was observed in the second part of the observation period with constant annual failure rate between 10 years and 20 years, whereas the minifilled material showed an increase in annual failure rate between 10 years and 20 years, suggesting that physical properties of the composite may have some impact on restoration longevity.

Longevity of Posterior Composite Restorations A Systematic Review and Meta-analysis

The aim of this meta-analysis, based on individual participant data from several studies, was to investigate the influence of patient-, materials-, and tooth-related variables on the survival of posterior resin composite restorations. Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, we conducted a search resulting in 12 longitudinal studies of direct posterior resin composite restorations with at least 5 years’ follow-up. Original datasets were still available, including placement/failure/censoring of restorations, restored surfaces, materials used, reasons for clinical failure, and caries-risk status. A database including all restorations was constructed, and a multivariate Cox regression method was used to analyze variables of interest [patient (age; gender; caries-risk status), jaw (upper; lower), number of restored surfaces, resin composite and adhesive materials, and use of glass-ionomer cement as base/liner (present or absent)]. The hazard ratios with respective 95% confidence intervals were determined, and annual failure rates were calculated for subgroups. Of all restorations, 2,816 (2,585 Class II and 231 Class I) were included in the analysis, of which 569 failed during the observation period. Main reasons for failure were caries and fracture. The regression analyses showed a significantly higher risk of failure for restorations in high-caries-risk individuals and those with a higher number of restored surfaces.

MMP Inhibitors on Dentin Stability A Systematic Review and Meta-analysis

The aim of this study was to systematically review the literature for in vitro and ex vivo studies that evaluated the effect of matrix metalloproteinase (MMP) inhibitors during the adhesive procedure on the immediate and long-term resin-dentin bond strength. The search was conducted in 6 databases with no publication year or language limits, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. From 1,336 potentially eligible studies, 48 were selected for full-text analysis, and 30 were included for review, with 17 considered in the meta-analysis. Two reviewers independently selected the studies, extracted the data, and assessed the risk of bias. Pooled effect estimates were expressed as the weighted mean difference between groups. The most used MMP inhibitor was chlorhexidine (CHX). Immediate bond strength results showed no difference between 2% CHX and control; however, a difference was found between 0.2% CHX and control at baseline. After aging, CHX presented higher bond strength values compared to control groups (p < .05). However, this was not observed for longer periods of aging. High heterogeneity was found in some comparisons, especially for the water storage aging subgroup. Subgroup analyses showed that self-etching and etch-and-rinse adhesives are benefited by the CHX use. From the studies included, only 1 presented low risk of bias, while the others showed medium or high risk of bias. The use of MMP inhibitors did not affect the immediate bond strength overall, while it influenced the aged bond strength. Aging procedures influenced bond strength values of the dentin adhesion stability.

Anterior composite restorations: A systematic review on long-term survival and reasons for failure

OBJECTIVE In this study the literature was systematically reviewed to investigate the clinical longevity of anterior composite restorations. DATA Clinical studies investigating the survival of anterior light-cured composite restorations with at least three years of follow-up were screened and main reasons associated with restoration failure were registered. SOURCES PubMed, Scopus, and Cochrane databases were searched without restriction on date or language. Reference lists of eligible studies were hand-searched. The grey literature search was not made systematically. STUDY SELECTION Two reviewers screened titles and/or abstracts of 2273 unique studies. In total, 41 studies were selected for full-text reading, from which 17 were included in the qualitative synthesis. The included studies evaluated the clinical performance of Class III and/or IV restorations (10 studies), which were placed due to caries, fracture, or replaced old restorations; veneers and full-coverage restorations placed for aesthetic reasons (five studies); and restorations in worn teeth (two studies). Annual failure rates (AFRs) were calculated for each study. CONCLUSIONS In total, 1821 restorations were evaluated and the total failure rate was 24.1%. AFRs varied from 0 to 4.1% and survival rates varied from 53.4% to 100%. Class III restorations generally had lower AFRs than the other restorations. Few studies addressed factors associated with failure, which included adhesive technique, composite resin, retreatment risk, and time required to build-up the restoration. Fracture of tooth/restoration was the most common reason for failure, whereas failures related to aesthetic qualities (color, anatomical form, surface stain) were more frequent when restorations were placed for aesthetic reasons.

An in vitro biofilm model for enamel demineralization and antimicrobial dose-response studies.

Microcosm biofilms formed in microplates have demonstrated complex community dynamics similar to natural dental biofilm. No simplified microcosm models to evaluate enamel demineralization and dose-response effect to anticariogenic therapies have yet been established, thus this study was designed to develop a pre-clinical model fulfilling this purpose. Experiments were carried out to establish the time of biofilm formation and the sucrose concentration and exposure regimen. Biofilms were initiated from saliva and grown for up to 10 days on bovine enamel discs in 24-well plates, with a saliva analogue medium. Data were collected as pH readings and thepercentage enamel surface hardness change. A dose-response evaluation was performed with chlorhexidine, which significantly affected the pH and mineral loss. Overall, the established model parameters, 5 days of biofilm growth with intermittent 1% sucrose exposure of 6 h per day, was suitable as a pre-clinical model for enamel demineralization and dose-response studies.

Sealing ability of MTA, Super EBA, Vitremer and amalgam as root-end filling materials

This study evaluated the root-end sealing ability of mineral trioxide aggregate (MTA Angelus), reinforced zinc oxide-eugenol cement (Super EBA), resin-modified glass ionomer (Vitremer) and zinc-free amalgam (GS-80) (control). The root canals of eighty human lower molars were accessed, cleansed, shaped and obturated. Apexes were resected and cavities were prepared. Teeth were divided into 4 groups of 40 cavities, root-end filled with the materials, and immersed in methylene blue for 72 h at 37 degrees C. Roots were then sectioned transversally at each millimeter and evaluated under magnification, observing the dye penetration in each section. Data were evaluated using Kruskal-Wallis test at a 5% level of significance, showing the differences among all materials (p < 0.001). The crescent order of microleakage was MTA < Vitremer < Super EBA < amalgam. Higher leakage levels were observed in the first millimeter sections of amalgam, Vitremer and MTA, when compared with the third millimeter section (p < 0.05).

Microcosm Biofilms Originating from Children with Different Caries Experience Have Similar Cariogenicity under Successive Sucrose Challenges

Objectives: The source of saliva inocula and the individual characteristics of saliva donors could affect the cariogenic activity of in vitro biofilms, but this could also be modulated by environmental determinants, such as the frequency of sugar consumption. Therefore, the aim of this study was to compare the cariogenicity of microcosm biofilm growths from the saliva of caries-free (CF) children, children with early childhood caries (ECC) and with severe ECC (S-ECC), under regular sucrose exposure. Methods: Microcosm plaque biofilms were initiated from the saliva of CF, ECC and S-ECC children. Biofilms were grown in 24-well microplates on bovine enamel discs for up to 10 days in artificial saliva, which was replaced daily. Growth conditions comprised cariogenic challenge (artificial saliva supplemented with 1% sucrose 6 h/day) or no cariogenic challenge. Daily pH was obtained from the artificial saliva, and after the experimental period, the biofilm formed on the enamel discs was collected for microbiological analyses. Mineral loss in enamel discs was estimated by percentage of surface hardness change. Results: Overall, no statistically significant differences were found among saliva sources (p > 0.05). Streptococcus mutans and lactobacilli counts increased in the biofilms grown under cariogenic challenge (p < 0.05), while a substantial decrease in the artificial saliva pH was detected under the same condition (p < 0.001). Higher demineralization (p < 0.001) was observed under sucrose exposure regardless of caries experience of children. Conclusions: While the sucrose exposure determined the cariogenicity of the biofilms, the caries experience of children who provided the inocula did not affect mineral loss associated with these biofilms.

Use of guidelines to improve the quality and transparency of reporting oral health research.

OBJECTIVE The use of reporting guideline is directed at enhancing the completeness and transparency of biomedical publications. The aims of this paper are to present some of the key initiatives and guidelines providing indications and directions on the use of specific tools in oral health research. METHODS The EQUATOR Network and five established guidelines (CONSORT, STROBE, PRISMA, CARE and SPIRIT) are introduced. RESULTS Five guidelines are presented covering reporting of case reports, non-randomized studies, randomized controlled trials and systematic reviews. The importance of adherence to these guidelines by oral health researchers is emphasized. CONCLUSIONS Endorsement and robust implementation of reporting guidelines will translate into improved and more complete reporting in health research. Moreover, by ingraining the use of guidelines, it may be possible to indirectly improve the methodological quality of clinical studies. Active implementation strategies to encourage adherence to these guidelines among researchers, reviewers, editors and publishers may be an important facet in the advancement of knowledge in dentistry. CLINICAL SIGNIFICANCE Inadequate reporting of research can lead to wasted research resources and risks publication of inaccurate or misleading findings with implications on healthcare decisions. Familiarity and diligent compliance with methodological and reporting guidelines are therefore essential to maximize the yield from dental research.

Cast metal vs. glass fibre posts: A randomized controlled trial with up to 3 years of follow up

OBJECTIVE This randomized controlled trial compared the survival of glass fibre and cast metal dental posts used to restore endodontically treated teeth with no remaining coronal wall. METHODS Fifty-four participants (45 women) and 72 teeth were evaluated during a follow-up period of up to 3 years. Teeth were randomly allocated to the glass-fibre and cast-metal post groups. All teeth were restored with single metal-ceramic crowns. Survival probabilities were analyzed using Kaplan-Meier statistics (p≤0.05). RESULTS The 3-year recall rate was 92.3% and the survival rates of glass fibre and cast metal posts were similar (97.1% and 91.9%, respectively; p=0.682). Four failures were observed: two glass fibre posts in a premolar and anterior tooth debonded, one glass fibre post in a premolar debonded in association with root fracture, and one root fracture occurred in a molar with a cast metal post. CONCLUSIONS Glass fibre and cast metal posts showed similar clinical performance in teeth with no remaining coronal wall after 3 years. CLINICAL SIGNIFICANCE Posts are used to restore most endodontically treated teeth with no remaining coronal wall. This randomized controlled trial, one of few to compare glass fibre and cast metal posts in such teeth, showed that post type did not significantly influence the survival of restorations. These results can help dentists respond to the important question of how best to rehabilitate endodontically treated teeth with no remaining coronal wall.