Maya Shopska

Biogenic iron compounds: XRD, Mossbauer and FTIR study

AbstractMaterials based on biogenic iron oxides, which are a product of the metabolic activities of the neutrophilic iron-oxidizing bacteria (NIOB) from Sphaerotilus-Leptothrix group, were investigated. Natural microbial probes were collected from freshwater flow from Vitosha Mountain (Bulgaria) and cultivated under laboratory conditions in respect to select suitable cultures and conditions (nutrition media) for biomaterial accumulation of biogenic oxides. Samples were studied by physicochemical methods: X-ray diffraction, Mossbauer spectroscopy and IR spectroscopy. Their phase composition and physicochemical properties were obtained. Presence of both amorphous and crystal phase (ultra- and highly dispersed particles) was proved. Iron-containing compound in the natural biomass consists of α-FeOOH. The cultivated materials have more complex composition with iron-containing ingredients as α-FeOOH, Γ-FeOOH, Γ-Fe2O3 and Fe3O4. The sample of natural biomass was tested in reaction of CO oxidation and it showed potential to be used as catalyst support.

Effect of the support and the reduction temperature on the formation of metallic nickel phase in Ni/silica gel precursors of vegetable oil hydrogenation catalysts

Ni/SiO2 materials with identical composition (SiO2/Ni = 1.0) have been synthesized by precipitation of Ni(NO3)2 · 6H2O solution with Na2CO3 solution on the silica gel, obtained at three different pH values. The present investigation was undertaken in an endeavor to study the effects of the silica gel support type and the reduction temperature on the formation and dispersion of the metallic nickel phase in the reduced Ni/SiO2 precursors of the vegetable oil hydrogenation catalyst. The physicochemical characterization of the unreduced and reduced precursors has been accomplished appropriately by powder X-ray diffraction, infrared spectroscopy, temperature programmed reduction and H2-chemisorption techniques. It can be stated that the texture peculiarities of the silica gels used as supports influence on the crystalline state and distribution of the deposited Ni-containing phases during the preparation of the precursors, on the reduction temperature of the investigated solids as well as on the bulk size and surface dispersion of the arising metallic nickel particles. It was shown that two types of Ni2+-species are formed during the synthesis procedure, namely basic nickel carbonate-like and Ni-phyllosilicate with different extent of presence, location and strength of interaction. The different location of these species is supposed to result in various strength of Ni-O and Ni-O-Si interaction, thus determining the overall reducibility of the precursors. It was specified that the Ni2+-species are strongly bonded to the surface of the silica gel obtained at neutral pH value and weakly bonded to the surface of those prepared in acidic and alkaline conditions. It was established that the precursor, derivates from the silica gel obtained at alkaline conditions, demonstrates both significant reduction of the Ni2+ ions at 430°C and finely dispersed metallic nickel particles on its surface. High dispersion of the metallic nickel might be the crucial reason for achieving of high activity in the vegetable oil hydrogenation.

Study on the Composition of Biogenic Iron-Containing Materials Obtained Under Cultivation of the Leptothrix sp. on Different Media

The biogenic iron oxide/hydroxide materials possess useful combination of physicochemical properties and are considered for application in various areas. Their production does not require special investments because these compounds are formed during cultivation of neurophilic iron bacteria. Bacteria from genus Leptothrix develop intensively in the Sphaerotilus-Leptothrix group of bacteria isolation medium and feeding media of Fedorov and Lieske. These media are different in their composition which determined the present study as an attempt to clear up the reasons that define the differences in the composition of the laboratory-obtained biomasses and the natural biomass finds. FTIRS, Mössbauer spectroscopy, and XRD were used in the research. Comparative analysis showed that the biomass and control samples contain iron compounds (α-FeOOH, γ-FeOOH, β-FeOOH, γ-Fe2O3) in different ratios. The biomass samples were enriched in oxyhydroxides of higher dispersion. Organic residuals of bacterial origin, SO4, CO3, and PO4 groups were registered in the biogenic materials.

A study of the dispersity of iron oxide and iron oxide-noble metal (Me = Pd, Pt) supported systems

Samples of one-(Fe) and two-component (Fe-Pd and Fe-Pt) catalysts were prepared by incipient wetness impregnation of four different supports: TiO2 (anatase), γ-Al2O3, activated carbon, and diatomite. The chosen synthesis conditions resulted in the formation of nanosized supported phases—iron oxide (in the one-component samples), or iron oxide-noble metal (in the two-component ones). Different agglomeration degrees of these phases were obtained as a result of thermal treatment. Ultradisperse size of the supported phase was maintained in some samples, while a process of partial agglomeration occurred in others, giving rise to nearly bidisperse (ultra-and highdisperse) supported particles. The different texture of the used supports and their chemical composition are the reasons for the different stability of the nanosized supported phases. The samples were tested as heterogeneous catalysts in total benzene oxidation reaction.

Ni–Al Layered Double Hydroxides as Precursors of Ceramic Pigments

Ni–Al layered double hydroxides with a ratio of Ni2+/Al3+ = 0.5, 1.5, and 3.0 were prepared by co-precipitation followed by stepwise heating in the range 473–1273 K in an air. The solids were investigated using specific surface area measurements, powder X-ray diffraction, scanning electron microscopy, infrared spectroscopy, diffuse reflectance spectroscopy, and magnetic susceptibility. It was found that the color of the obtained oxide derivatives, varying from pale green to dark turquoise, cyan, or pale blue, is determined by the coordination state of the Ni2+ ions depending on the nickel content and the calcination temperature of the Ni–Al layered precursors. Owing to its chemical composition, homogeneity and morphological characteristics, the nanosized well-defined single-phase NiAl2O4 spinel is suitable candidate for obtaining fine-colored cyan or pale blue nano-pigments. The proposed pigments represent less expensive alternative to blue CoAl2O4 spinel for some glaze applications. Finally, Ni–Al layered double hydroxides represent appropriate materials for the preparation of ceramic pigments with different properties and applications.