Mehedi Reza

Simultaneous preparation of cellulose nanocrystals and micron-sized porous colloidal particles of cellulose by TEMPO-mediated oxidation

TEMPO-mediated oxidation of commercially available microgranular cellulose resulted in particles of three different length scales: rod-like cellulose nanocrystals (∼100 nm in length), micron-sized particles (microns in length), and coarse particles (typically tens of microns in length). The particles in the two larger fractions were highly porous, consisting of aligned nanocrystals.

High‐Strength Composite Fibers from Cellulose–Lignin Blends Regenerated from Ionic Liquid Solution

Composite fibres that contain cellulose and lignin were produced from ionic liquid solutions by dry-jet wet spinning. Eucalyptus dissolving pulp and organosolv/kraft lignin blends in different ratios were dissolved in the ionic liquid 1,5-diazabicyclo[4.3.0]non-5-enium acetate to prepare a spinning dope from which composite fibres were spun successfully. The composite fibres had a high strength with slightly decreasing values for fibres with an increasing share of lignin, which is because of the reduction in crystallinity. The total orientation of composite fibres and SEM images show morphological changes caused by the presence of lignin. The hydrophobic contribution of lignin reduced the vapour adsorption in the fibre. Thermogravimetric analysis curves of the composite fibres reveal the positive effect of the lignin on the carbonisation yield. Finally, the composite fibre was found to be a potential raw material for textile manufacturing and as a precursor for carbon fibre production.

Stealth Amphiphiles: Self-Assembly of Polyhedral Boron Clusters

This is the first experimental evidence that both self-assembly and surface activity are common features of all water-soluble boron cluster compounds. The solution behavior of anionic polyhedral boranes (sodium decaborate, sodium dodecaborate, and sodium mercaptododecaborate), carboranes (potassium 1-carba-dodecaborate), and metallacarboranes {sodium [cobalt bis(1,2-dicarbollide)]} was extensively studied, and it is evident that all the anionic boron clusters form multimolecular aggregates in water. However, the mechanism of aggregation is dependent on size and polarity. The series of studied clusters spans from a small hydrophilic decaborate-resembling hydrotrope to a bulky hydrophobic cobalt bis(dicarbollide) behaving like a classical surfactant. Despite their pristine structure resembling Platonic solids, the nature of anionic boron cluster compounds is inherently amphiphilic-they are stealth amphiphiles.

Self-Assembled Arginine-Capped Peptide Bolaamphiphile Nanosheets for Cell Culture and Controlled Wettability Surfaces.

The spontaneous assembly of a peptide bolaamphiphile in water, namely, RFL4FR (R, arginine; F, phenylalanine; L, leucine) is investigated, along with its novel properties in surface modification and usage as substrates for cell culture. RFL4FR self-assembles into nanosheets through lateral association of the peptide backbone. The L4 sequence is located within the core of the nanosheets, whereas the R moieties are exposed to the water at the surface of the nanosheets. Kinetic assays indicate that the self-assembly is driven by a remarkable two-step process, where a nucleation phase is followed by fast growth of nanosheets with an autocatalysis process. The internal structure of the nanosheets is formed from ultrathin bolaamphiphile monolayers with a crystalline orthorhombic symmetry with cross-β organization. We show that human corneal stromal fibroblast (hCSF) cells can grow on polystyrene films coated with films dried from RFL4FR solutions. For the first time, this type of amphiphilic peptide is used as a substrate to modulate the wettability of solid surfaces for cell culture applications.

Self-Assembly and Collagen-Stimulating Activity of a Peptide Amphiphile Incorporating a Peptide Sequence from Lumican

The self-assembly and bioactivity of a peptide amphiphile (PA) incorporating a 13-residue sequence derived from the last 13 amino acids of the C-terminus of lumican, C16-YEALRVANEVTLN, attached to a hexadecyl (C16) lipid chain have been examined. Lumican is a proteoglycan found in many types of tissue and is involved in collagen fibril organization. A critical aggregation concentration (cac) for the PA was determined through pyrene fluorescence measurements. The structure of the aggregates was imaged using electron microscopy, and twisted and curved nanotapes were observed. In situ small-angle X-ray scattering and fiber X-ray diffraction reveal that these tapes contain interdigitated bilayers of the PA molecules. FTIR and circular dichroism spectroscopy and fiber X-ray diffraction indicate that the lumican sequence in the PA adopts a β-sheet secondary structure. Cell assays using human dermal fibroblasts show that below the cac the PA displays good biocompatibility and also stimulates collagen production over a period of 3 weeks, exceeding a 2-fold enhancement for several concentrations. Thus, this PA has promise in future biological applications, in particular, in tissue engineering.

Toll-like receptor agonist lipopeptides self-assemble into distinct nanostructures

The self-assembled structure of toll-like receptor agonist lipopeptides containing the CSK4 peptide sequence is examined in aqueous solution. A remarkable dependence of morphology on the number of attached hexadecyl lipid chains is demonstrated, with spherical micelle structures for mono- and di-lipidated structures observed, but flexible wormlike micelles for the homologue containing three lipid chains. The distinct modes of assembly may have an important influence on the bioactivity of this class of lipopeptide.

Intra-annual tracheid formation of Norway spruce provenances in southern Finland

We studied the intra-annual wood formation in a Norway spruce provenance experiment in southern Finland from 2004–2008. Two Finnish provenances, northern and southern, as well as German and Hungarian provenances were included. Timing of tracheid formation and differentiation, and tracheid dimensions were determined from periodically extracted microcores. The aim was to determine the differences between the years and provenances in the timing of the xylogenesis and in the xylem characteristics. Year-to-year variation was high both in timing of tracheid formation and xylem characteristics, while between-provenance differences were small. The onset of tracheid formation varied from early May to late June in different trees in different years. The onset of tracheid formation was not closely related to the annual variations of temperature sum. In all the years, daily temperatures exceeded the threshold +5°C for several weeks before the onset of tracheid formation. The highest tracheid formation rate occurred after the summer solstice in all years and generally coincided with the highest daily temperatures during the growing season. Tracheid production ceased early in 2006 due to a mid-summer drought. Cell differentiation continued late in autumn as non-mature tracheids were still observed around mid-September. No clear differences between the provenances in the timing of tracheid formation were observed, although the Finnish provenances tended to initiate tracheid formation slightly earlier than the other provenances. The tree-ring widths of the Finnish provenances were also wider, while tracheid diameter of the German provenance was slightly smaller. Our results indicate that between-tree variation in the timing of wood formation is high compared with the latitude effect of seed source.

Self-Assembly of the Cyclic Lipopeptide Daptomycin: Spherical Micelle Formation Does Not Depend on the Presence of Calcium Chloride.

The cyclic lipopeptide Daptomycin, used as a treatment for infections where antimicrobial resistance is observed, is shown to self-assemble into spherical micelles above a critical aggregation concentration. Micelles are observed either in the absence or presence of CaCl2 , in contrast to claims in the literature that CaCl2 is required for micellization.

TEMPO-mediated oxidation of microcrystalline cellulose: limiting factors for cellulose nanocrystal yield

Cellulose nanocrystal (CNC) production suffers, among other problems, from low yields. The focus of this study was to investigate the universal effect of charge density, centrifugation, and mechanical treatment as limiting causes of yield. Microcrystalline cellulose (MCC) was used as the starting material in order to eliminate the relatively arbitrary yield losses caused by the hydrolysis conditions. To disintegrate MCC into nanocrystals, high surface charge in the form of carboxylic groups was introduced by TEMPO-mediated oxidation, after which the material was mechanically treated, and separated into fine and coarse fractions. The fine fraction collected as supernatant after separation by centrifugation had a yield of 17–20% independent of the mechanical treatment method or time used. The particle sizes of these fractions did not significantly differ from each other, which raises questions on the efficiency of the mechanical treatment (sonication) and centrifugation in traditional CNC production. The results imply that radically new approaches in preparation are needed for truly meaningful increases in the CNC yield.

Hybrid membrane biomaterials from self-assembly in polysaccharide and peptide amphiphile mixtures: controllable structural and mechanical properties and antimicrobial activity

Macroscopic capsules, with tunable properties based on hierarchical self-assembly on multiple lengthscales, are prepared from the co-operative self-assembly of polysaccharide and peptide amphiphiles. Different formulations can be used to create flexible membrane sacs in solution, soft capsules or rigid free-standing capsules. Samples are prepared by injecting a solution containing sodium alginate, with or without graphene oxide (GO), into a matrix consisting of a solution containing the peptide amphiphile PA C16-KKFF (K: lysine, F: phenylalanine), with or without CaCl2. Graphene oxide is added to the hybrid materials to modulate the mechanical properties of the capsules. Injection of sodium alginate solution into a pure PA matrix provides a flexible membrane sac in solution, while injection of NaAlg/GO solution into a PA matrix gives a soft capsule. Alternatively, a rigid free-standing capsule is made by injecting a NaAlg/GO solution into a PA + CaCl2 matrix solution. A comprehensive insight into the hierarchical order within the capsules is provided through analysis of X-ray scattering data. A novel “Langmuir–Blodgett” mechanism is proposed to account for the formation of the sacs and capsules as the alginate solution is injected at the interface of the PA solution. The capsules show a unique antibacterial effect specific for the Gram positive bacterium Listeria monocytogenes, which is an important human pathogen. The hybrid nanostructured capsules thus have remarkable bioactivity and due to their tunable structural and functional properties are likely to have a diversity of other future applications.