Meiten Koh

The dissolution behavior of tetrafluoroethylene-based fluoropolymers for 157-nm resist materials

Main-chain-fluorinated base-resins, using the copolymer of tetrafluoroethylene and functional (hexafluoroisopropanol (HFA) group) norbornene, were synthesized. Partial protection of its hydroxyl group as ethoxymethyl group was achieved by two methods, by copolymerization (Method A) or by polymer reaction (Method B). The partial protection by copolymerization was conducted by copolymerizing TFE with the mixture of protected and unprotected monomers (Method A, copolymerization). The partial protection was also carried out by reacting hydroxyl group of the polymer, which is composed of TFE and unprotected monomers with ethoxymethyl chloride in the presence of an amine (Method B). In the polymer reaction, only exo position of the norbornene unit was protected. Their fundamental properties, such as transparency at 157 nm and solubility in a standard alkaline developer, were characterized and studied. A high transparency, i.e., absorbance of less than 0.4 μm-1, was achieved in both methods. However, the polymer prepared by the polymer reaction (Method B) was deprotected more quickly. And this polymer had a higher dissolution rate and development contrast than the polymer prepared by copolymerization (Method A). The Positive-working resists based on this fluororesins were developed and 55 nm dense lines could be delineated by the exposure at 157 nm wavelength with alternating phase shift mask on a 0.9 NA 157 nm exposure tool.

Characterization of TFE/norbornene-based fluoropolymer resist for 157-nm lithography

Fluoropolymers are key materials in the single-layer resists used in 157-nm lithography. We have been studying fluoropolymers to determine their potential use as base resins. These polymers are main-chain fluorinated polymers synthesized by co-polymerizing tetrafluoroethylene (TFE) and functional norbornene. We developed a new polymer that is highly transparent and has high dry-etching resistance by attaching a PG-F protecting group, which has high dry-etching resistance, to a TFE/norbornene-based fluorinated polymer. The dry-etching rate for the 15 % blocked polymer was 1.50 times that of a KrF resist and its absorption coefficient at a 157-nm-exposure wavelength was 1.06 /μm. We introduced various photoacid generators (PAGs) to the polymer, and compared lithographic performance. As a result, we found polymer with a triphenylsulfonium-salts-based PAG had a good pattern profile, and polymer with a high-acidity PAG resolved a fine pattern. In particular, polymer with a triphenylsulfonium perfluorooctane sulfonate PAG was able to resolve a 60-nm line and space pattern. We then added various quenchers to the polymer and the PAG, and compared pattern profiles. We found that the use of a high-basicity quencher improved the resolution of the resist and line edge roughness. Consequently, that the polymer with the triphenylsulfonium perfluorooctane sulfonate PAG and tributylamine quencher could resolve a 55-nm line and space pattern. These results provided guidelines for choosing the PAG and quencher for this polymer.