Melahat Görduysus

A comparison of three rotary systems and hand instrumentation technique for the elimination of Enterococcus faecalis from the root canal.

The aim of this study was to compare the in vitro reduction of a bacterial population in a root canal by mechanical instrumentation using three rotary systems and hand instrumentation technique. The root canals contaminated with a suspension of Enterococcus faecalis were instrumented using ProTaper, K3, HeroShaper and K-file hand instrumentation technique. Later the root canals were sampled. After serial dilutions, samples were incubated in culture media for 24 h. Bacterial colonies were counted and the results were given as number of colony-forming units per millilitre. The results showed that all the canal instrumentation systems reduced the number of bacterial cells in the root canals. Statistically, ProTaper instruments were more effective in reducing the number of bacteria than the other rotary files or hand instruments.

Evaluation of the radiopacity of different root canal sealers.

OBJECTIVE The aims of this study were to compare the radiopacity of 8 root canal sealers relative to gutta-percha and dentin in standard discs and to evaluate the effect of these sealers on the radiopacity of root canal fillings in simulated canals. STUDY DESIGN Radiographs were taken of 1-mm-thick specimens of 8 root canal sealers (Diaket, Endion, MTA, Endofil, Roeko Seal, Sealite, AH26, AH Plus) and gutta-percha, a 1-mm-thick human tooth slice, and aluminum stepwedge.Simulated canals were used to evaluate the effect of the sealer on radiopacity of the root fillings. After enlargement of the simulated canals with ProTaper instrument, root canals were filled with these 8 sealers alone and with single ProTaper gutta-percha cone. Radiographs of all filled simulated canals were taken with an aluminum stepwedge. RESULTS All the sealers demonstrated greater radiopacity than dentin (0.7940 mm Al) (P < .001). AH Plus showed the highest radiopacity in the standard disc group (Group 1) (8.9881 mm Al) (P < .001), and in the sealer group in simulated canals (Group 2) (9.2100 mm Al) (P < .001). In the sealer plus gutta-percha group in simulated canals (Group 3), Sealite plus gutta-percha showed greater radiopacity (8.4460 mm Al) (P < .001). CONCLUSION Whether the opacity of the sealers alone is more or less than 3 mm Al, their radiopacity is increased when they are used in combination with gutta-percha, because of its higher radiopacity. However, when sealers are used in conjunction with gutta-percha, they can affect the radiopacity of the root canal filling according to their type and thickness.

Spontaneously healed root fractures: two case reports.

We report on two undiagnosed horizontal root fractures of two maxillary right central incisors in two different patients caused by dental trauma which occurred several years ago. These fractures were discovered during a routine full-mouth radiographic examination. While, in case one, the fracture was located in the middle-third of the root, it was in the cervical-third of the root in case two. The fractured teeth were observed to have healed spontaneously without any sign or symptom, and tested as vital to electric pulp test.

Effectiveness of a new canal brushing technique in removing calcium hydroxide from the root canal system: A scanning electron microscope study

Aim: To evaluate the effectiveness of Canal Brush technique removal Ca(OH)2 from the root canal system using Scanning Electron Microscope (SEM). Materials and Methods: Eighteen teeth were instrumented up to #40 and dressed with Ca(OH)2. Ca(OH)2 was removed with master apical file (MAF) (Group 1, n:6) and CanalBrush technique (Group 2, n:6). Six teeth served as positive and negative controls. The roots were splited in the buccolingual direction and prepared for SEM examination. Two examiners evaluated the wall cleanliness then statistical analysis was performed by Mann-Whitney U and Friedman tests. Results: Differences in cleanliness were observed between Group 1 and Group 2 in the apical thirds (P=0.002). In the coronal and middle thirds, there were no differences between the two groups. Conclusions: It is essential to re-instrument the root canal walls using instrumentation techniques while irrigating with NaOCl and EDTA combination. The Canal Brush technique results in the packing effect of the Ca(OH)2 through to the apex.

Final Irrigation Regimens Affect Fracture Resistance Values of Root-filled Teeth.

INTRODUCTION The purpose of this study was to compare the effect of different final irrigation solutions on fracture resistance values (FRVs) of endodontically treated teeth. METHODS Eighty extracted decoronated human incisors were used. Ten randomly selected roots were used as the negative control group. The remaining roots were prepared by the ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) up to F2. Ten prepared roots were selected as the positive control. The other prepared roots were divided into 6 (n = 10) groups according to the final irrigation solution used: 5 mL saline, 17% EDTA, EDTA with a surfactant (REDTA), chlorhexidine, QMix (Dentsply Tulsa Dental Specialties, Tulsa, OK), and BioPure MTAD (Dentsply Tulsa Dental Specialties). In all groups, the final irrigation was performed for 1 minute except for the BioPure MTAD group; in this group, it was applied for 5 minutes according to the manufacturers instructions. The specimens were filled with a single gutta-percha cone and AH 26 sealer (Dentsply, De Trey, Konstanz, Germany). After being stored under 37 °C and 100% humidity for a week, the specimens were loaded in a vertical direction at 1 mm/min speed until they were vertically fractured. The results were analyzed by the Kruskal-Wallis and Siegel Castellan tests. RESULTS The negative control group showed the highest FRV. There were statistically significant differences between the negative and positive control groups (P < .05). Specimens irrigated with REDTA and QMix showed a higher FRV compared with the positive control group (P < .05). Specimens exposed to chlorhexidine and BioPure MTAD showed a lower FRV compared with the negative control group (P < .05). CONCLUSIONS Root canal preparation weakens the tooth. The final irrigation regimen has an impact on the FRV. A short time exposure to irrigation solutions (REDTA and QMix) that include surfactants probably contributed to the higher FRV, instead of a long time exposure as done with BioPure MTAD.

Evaluation of the effects of two novel irrigants on intraradicular dentine erosion, debris and smear layer removal

Objectives To evaluate the effects of copolymer of acrylic acid and maleic acid (Poly[AA-co-MA]) and calcium hypochlorite (Ca(OCl)2) on root canal dentin using scanning electron microscope (SEM). Materials and Methods Twenty-four single-rooted teeth were instrumented and the apical and coronal thirds of each root were removed, leaving the 5 mm middle thirds, which were then separated into two pieces longitudinally. The specimens were randomly divided into six groups and subjected to each irrigant for 5 min as follows: G1, Ca(OCl)2; G2, Poly(AA-co-MA); G3, Ca(OCl)2 + Poly(AA-co-MA); G4, sodium hypochlorite (NaOCl); G5, ethylenediaminetetraacetic acid (EDTA); G6, NaOCl+EDTA. The specimens were prepared for SEM evaluation. Smear layer, debris and erosion scores were recorded by two blinded examiners. One image from G3 was analyzed with energy dispersive spectroscopy (EDS) on suspicion of precipitate formation. Data were analyzed using the Kruskal-Wallis and Dunn tests. Results G1 and G4 showed the presence of debris and smear layer and they were statistically different from G2, G3, G5 and G6 where debris and smear layer were totally removed (p < 0.05). In G1 and G4, erosion evaluation could not be done because of debris and smear layer. G2, G3 and G5 showed no erosion, and there was no significant difference between them. G6 showed severe erosion and was statistically different from G2, G3 and G5 (p < 0.05). EDS microanalysis showed the presence of Na, P, and Ca elements on the surface. Conclusions Poly(AA-co-MA) is effective in removing the smear layer and debris without causing erosion either alone or with Ca(OCl)2.

A comparison of different irrigation systems and gravitational effect on final extrusion of the irrigant.

Background The aim of this study was to compare manual needle irrigation (MNI), RinsEndo (RE), and passive ultrasonic irrigation (PUI), and assess the effect of gravity on extrusion from the apex in vitro. Material and Methods The distobuccal roots of molars were used and the canals were instrumented up to F2. Teeth were mounted on models, which permitted visualization and manipulation of the apices for necessary procedures. The models were placed in articulator to simulate the jaw. Six groups (G) were formed as: G1, G2 and G3 represented mandibular positioning of teeth and were irrigated with MNI, RE, and PUI, respectively, while G4, G5, and G6 represented maxillary positioning of teeth and were also irrigated in same sequence. Prior to the final irrigation, 72 cube-shaped foam pieces covered with aluminum foil were weighed and the values were recorded as the initial weights. The cubes were then placed on the apical part of each sample. Final irrigation was performed with distilled water and the cubes were weighed again to determine their final weight. Data were analyzed using Kruskal-Wallis and Mann-Whitney U post-hoc test (p<0.05). Results Irrespective of the irrigation technique used, the amount of irrigant extruded from the apex showed a statistically significant difference related to the effect of gravity (p<0.05). There was no statistically significant difference between irrigation methods (p>0.05). When the irrigation systems were compared to examine the effect of gravity, the significant difference was found between G2 and G5 (p<0.05). Conclusions Within the limitations of this study, MNI and PUI were found to be reliable irrigation systems. Caution should be exercised when using RinsEndo. Key words:Final irrigation, manual needle irrigation, passive ultrasonic irrigation, RinsEndo.

Effects of Different Rotary Files Combined with Different Irrigation Needles on Apically Extruded Debris

The aim of this study was to compare the apically extruded debris associated with ProTaper Next and OneShape Apical files using two different irrigation needles, open-ended and closed-ended (Max-I-Probe). Forty-eight mandibular premolars were assigned to four groups (n=12) as follows: Group PTN-SN: Root canal was prepared with ProTaper Next (PTN) and irrigated with open-ended standard needle; Group PTN-MP: Root canal was prepared with PTN and irrigated with Max-I-Probe; Group OSA-SN: Root canal was prepared with OneShape Apical (OSA) and irrigated with open-ended needle; Group OSA-MP: Root canal was prepared with OSA and irrigated with Max-I-Probe. Debris extruded during instrumentation was collected into pre-weighed Eppendorf tubes. After storage in an incubator at 70 °C for 5 days, the Eppendorf tubes were weighed to obtain the final weight with extruded debris. The difference between pre-and post-debris weights was calculated and statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U tests (p<0.05). No statistically significant difference was observed between files and needles regarding amount of apically extruded debris (p>0.05). OneShape Apical and ProTaper Next resulted in extrusion of debris beyond the apical foramen, regardless of needle tip.

Measure of the pressure pain threshold in human acute and chronic pulpal diseases

AbstractThe purpose of this study was to measure the pressure pain threshold in acute and chronic pulpitis. 52 patients were introduced into this study and their affected and contralateral tooth and contralateral tooth plus four reference points from different body surfaces were tested with a pressure algometer to find out the pressure pain threshold values. Pain threshold was significantly lower in acute than in chronic pulpitis and in chronic and acute pulpitis vs. other sites of the body. Threshold in the affected side was significantly lower than in the contralateral healthy side.

Interaction of backfilling techniques and MTA plugs with additives: Fracture strength and adaptation analyses

The aims were to evaluate the effects of different additives on the adaptation of mineral trioxide aggregate (MTA) plugs before and after different backfilling techniques and analyze the interference of filling procedures on the fracture resistance of simulated immature teeth. The apical parts of 60 teeth were filled with MTA mixed with distilled water (DW), propylene glycol (PG) or calcium chloride (CaCl2) and backfilled with cold lateral condensation (CLC) or warm vertical compaction (WVC). The specimens were subjected to adaptation analysis and fracture testing. CaCl2 addition resulted in poor marginal adaptation, while PG addition significantly decreased the fracture values (p<0.05). WVC technique negatively affected the marginal adaptation of MTA-CaCl2 plugs and decreased the fracture values of teeth with MTA-PG plugs (p<0.05). Mixing MTA with DW can be recommended as apical plug when the remaining root canal space is going to be filled with either CLC or WVC techniques.