Meng Chen

Templateless Infrared Heating Process for Fabricating Carbon Nitride Nanorods with Efficient Photocatalytic H2 Evolution

The bottom-up fabrication of carbon nitride nanorods is realized through the direct infrared heating of dicyandiamide. The approach requires no templates or extra organics. The controlled infrared heating has a major influence on the morphology of the obtained carbon nitrides. The precursors assemble into carbon nitride nanorods at low power levels, and they grow into nanoplates at high power levels. The formation mechanism of the carbon nitride nanorods is proposed to be a kinetically driven process, and the photocatalytic activity of the carbon nitride nanorods prepared at 50% power for hydrogen evolution is about 2.9 times that of carbon nitride nanoplates at 100% power. Structural, optical, and electronic analysis demonstrates that the enhancement is primarily attributed to the elimination of structural defects and the improved charge-carrier separation in highly condensed and oriented carbon nitride nanorods.

Synthesis, Study, and Discrete Dipole Approximation Simulation of Ag-Au Bimetallic Nanostructures

Water-soluble Ag-Au bimetallic nanostructures were prepared via co-reduction and seed-mediated growth routes employing poly-(4-styrenesulfonic acid-co-maleic acid) (PSSMA) as both a reductant and a stabilizer. Ag-Au alloy nanoparticles were obtained by the co-reduction of AgNO3 and HAuCl4, while Ag-Au core-shell nanostructures were prepared through seed-mediated growth using PSSMA-Au nanoparticle seeds in a heated AgNO3 solution. The optical properties of the Ag-Au alloy and core-shell nanostructures were studied, and the growth mechanism of the bimetallic nanoparticles was investigated. Plasmon resonance bands in the range 422 to 517xa0nm were observed for Ag-Au alloy nanoparticles, while two plasmon resonances were found in the Ag-Au core-shell nanostructures. Furthermore, discrete dipole approximation theoretical simulation was used to assess the optical property differences between the Ag-Au alloy and core-shell nanostructures. Composition and morphology studies confirmed that the synthesized materials were Ag-Au bimetallic nanostructures.

Pd(II)-Directed Encapsulation of Hydrogenase within the Layer-by-Layer Multilayers of Carbon Nanotube Polyelectrolyte Used as a Heterogeneous Catalyst for Oxidation of Hydrogen

A metal-directed assembling approach has been developed to encapsulate hydrogenase (H2ase) within a layer-by-layer (LBL) multilayer of carbon nanotube polyelectrolyte (MWNT-PVPMe), which showed efficient biocatalytic oxidation of H2 gas. The MWNT-PVPMe was prepared via a diazonium process and addition reactions with poly(4-vinylpyridine) (PVP) and methyl iodide (MeI). The covalently attached polymers and organic substituents in the polyelectrolyte comprised 60-70% of the total weight. The polyelectrolyte was then used as a substrate for H2ase binding to produce MWNT-PVPMe@H2ase bionanocomposites. X-ray photoelectron spectra revealed that the bionanocomposites included the elements of Br, S, C, N, O, I, Fe, and Ni, which confirmed that they were composed of MWNT-PVPMe and H2ase. Field emission transmission electron microscope images revealed that the H2ase was adsorbed on the surface of MWNT-PVPMe with the domains ranging from 20 to 40 nm. Further, with the use of the bionanocomposites as nanolinkers and Na2PdCl4 as connectors, the (Pd/MWNT-PVPMe@H2ase)n multilayers were constructed on the quartz and gold substrate surfaces by the Pd(II)-directed LBL assembling technique. Finally, the as-prepared LBL multilayers were used as heterogeneous catalysts for hydrogen oxidation with methyl viologen (MV(2+)) as an electron carrier. The dynamic processes for the reversible color change between blue-colored MV(+) and colorless MV(2+) (catalyzed by the LBL multilayers) were video recorded, which confirmed that the H2ase encapsulated within the present LBL multilayers was of much stronger stability and higher biocatalytic activity of H2 oxidation resulting in potential applications for the development of H2 biosensors and fuel cells.

Immobilization of hydrogenase on carbon nanotube polyelectrolytes as heterogeneous catalysts for electrocatalytic interconversion of protons and hydrogen

Immobilization of active enzymes on the surfaces of electrodes and nanomaterials is important in the fields of bioscience, and biotechnology. In this study, we investigated electrocatalytic properties of the interconversion of protons and hydrogen by means of hydrogenase (H2ase)-functionalized carbon nanotube polyelectrolyte composites. Multiwalled carbon nanotube polyelectrolytes (MWNT-PEs) were synthesized through a diazonium and an addition reaction with poly(4-vinylpyridine) (P4VP), followed by another addition reaction with either methyl iodide (CH3I) or N-methyl-N′-benzyl bromide bipyridinium (VBenBr) to produce MWNT-P4VPMe or MWNT-P4VPBenV polyelectrolytes, respectively. The MWNT-PE@H2ase bio-nanocomposites were then prepared by means of MWNT-PEs as substrates to bind with H2ase. The redox current density of the MWNT-PE@H2ase-modified electrodes increased with a decrease in pH values of the Ar-saturated electrolyte solution owing to the catalytic reduction of protons (H2 production); further, it increased with the increasing pH values of the H2-saturated solution owing to the catalytic oxidation of hydrogen. The reversible color change between blue-colored and colorless viologen (catalyzed by the MWNT-PE@H2ase bio-nanocomposites) suggested that they may be developed as nano-biosensors for molecular H2. The as-synthesized bio-nanocomposites showed strong long-term stability and high bioactivity.Graphical Abstract

Fabrication, electrochemical and catalytic properties of the nanocomposites composed of phosphomolybdic acid and viologen-functionalized multi-walled carbon nanotubes

AbstractElectroactive nanocomposites composed of phosphomolybdic acid (PMA) and viologen-functionalized carbon nanotubes were synthesized and used as heterogeneous catalysts for the electrocatalytic reduction of bromate. Viologen (V) was first covalently anchored on the surface of multi-walled carbon nanotubes (MWNTs) to produce positively charged MWNT-V polyelectrolyte, which was then combined with PMA through electrostatic interaction to form MWNT-V@PMA nanocomposites. Thermogravimetric analysis revealed that the organic species in the MWNT-V polyelectrolyte was about 30% in weight. Composition, structure, and morphology of the nanocomposites were investigated by using UV-vis, infrared, Raman and X-ray photoelectron spectroscopy as well as field emission transition electron microscope. The thickness of organic substituents, viologen, and PMA in the nanocomposites was approximately 10xa0nm covered on the surface of MWNTs. Cyclic voltammogram measurements for the casting films of MWNT-V@PMA nanocomposites revealed four couples of redox waves with cathodic potentials at about −0.56, −0.19, 0.02, 0.21 V, and anodic ones at about −0.46, −0.11, 0.12, 0.31 V (vs Ag/AgCl), respectively, among which the first one corresponded to the electron transfer process of viologens and others to that of the PMA adsorbed. Finally, the MWNT-V@PMA modified electrodes were used as heterogeneous catalysts for the electrocatalytic bromate reduction, which revealed an almost linear correction between the current density and the bromate concentrations in the concentration range from 1 to 15xa0mmol/l.n Graphical abstractᅟ