Mengying Zhang

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

We report a simple methodology to fabricate PDMS multi-layer microfluidic chips. A PDMS slab was surface-treated by trichloro (1H,1H,2H,2H-perfluorooctyl) silane, and acts as a reusable transferring layer. Uniformity of the thickness of the patterned PDMS layer and the well-alignment could be achieved due to the transparency and proper flexibility of this transferring layer. Surface treatment results are confirmed by XPS and contact angle testing, while bonding forces between different layers were measured for better understanding of the transferring process. We have also designed and fabricated a few simple types of 3D PDMS chip, especially one consisting of 6 thin layers (each with thickness of 50 mum), to demonstrate the potential utilization of this technique. 3D fluorescence images were taken by a confocal microscope to illustrate the spatial characters of essential parts. This fabrication method is confirmed to be fast, simple, repeatable, low cost and possible to be mechanized for mass production.

Real-time detection, control, and sorting of microfluidic droplets.

We report the design and implementation of capacitive detection and control of microfluidic droplets in microfluidic devices. Integrated microfluidic chip(s) with detectioncontrol circuit enables us to monitor in situ the individual volume of droplets, ranging from nanoliter to picoliter, velocity and even composition, with an operation frequency of several kilohertz. Through electronic feedback, we are able to easily count, sort, and direct the microfluidic droplets. Potential applications of this approach can be employed in the areas of biomicrofluidic processing, microchemical reactions as well as digital microfluidics.

Generation and manipulation of “smart” droplets

We report the generation and manipulation of electrorheological (ER) droplets that exhibit the giant ER effect. The experiments were carried out on specially designed microfluidic chips, in which the ER droplets were generated by using the microfluidic flow-focusing approach. Both the size and formation rate of these droplets can be controlled through digitally applied electrical signals. The principle of droplet manipulation is based on the electrical responsiveness of ER droplets and hence the denotation of “smart” when the electrical signals can be triggered by sensing/control devices. Due to the unique characteristics of the GER effect, the smart droplets can deform and even stop the microfluidic channel flow under an applied electric field. The pressure difference induced by the smart droplets inside the micro-channel is controllable by varying the field strengths, droplet sizes and particle concentrations in the GER suspension. By trapping and timed release of smart droplets in different micro-branch channels, we demonstrate that the smart droplets generated upstream cannot only be stored or displayed in the desired downstream channel(s) and thereby offer the potential of micro-droplet display, but also be useful in counting, flow directing and sorting the desired number of passive droplets sandwiched between two smart droplets. Such capabilities of smart droplets will enable the programmable control of discrete processes in bio-analysis, chemical reactions, digital microfluidics, and digital droplet display.

Magnetically responsive elastic microspheres

We report the design, fabrication, and characterization of magnetically responsive elastic microspheres consisting of polydimethylsioxane (PDMS) and magnetic nano-/microparticles. The microspheres can have either core-shell or solid structure, fabricated by using a microfluidic technique. The mechanical characteristics are determined with a modified electronic balance, and the results show that the microspheres exhibit magnetostrictive effect. Such microspheres can in addition behave as a smart material controllable through an external magnetic field. Owing to the transparency, biocompatibility and nontoxicity of PDMS, the magnetically responsive elastic microspheres may have potential applications in drug delivery, biosensing, bioseparation, and medical diagnosis.

Polydimethylsiloxane-integratable micropressure sensor for microfluidic chips.

A novel microfluidic pressure sensor which can be fully integrated into polydimethylsiloxane (PDMS) is reported. The sensor produces electrical signals directly. We integrated PDMS-based conductive composites into a 30 mum thick membrane and bonded it to the microchannel side wall. The response time of the sensor is approximately 100 ms and can work within a pressure range as wide as 0-100 kPa. The resolution of this micropressure sensor is generally 0.1 kPa but can be increased to 0.01 kPa at high pressures as a result of the quadratic relationship between resistance and pressure. The PDMS-based nature of the sensor ensures its perfect bonding with PDMS chips, and the standard photolithographic process of the sensor allows one-time fabrication of three dimensional structures or even microsensor arrays. The theoretical calculations are in good agreement with experimental observations.

Fano effect of metamaterial resonance in terahertz extraordinary transmission

We show that the terahertz resonant transmission through metal hole array can be tailored by filling the holes with metamaterials. Experiment and finite difference time domain simulations show this type of resonant transmission to be induced by locally resonant modes, instead of the usual lateral surface grating mode. As the metamaterial’s local resonances can be manipulated by varying their geometric configurations, this type of resonant transmission can be tuned over a broad frequency regime that is subwavelength to the array periodicity, with a transmission profile that can also be tailored by the frequency location of the resonance. Such tunability of resonant transmission, with its attendant enhanced local field intensity in the vicinity of the aperture, may provide some potential applications.

Logic control of microfluidics with smart colloid

We report the successful realization of a microfluidic chip with switching and corresponding inverting functionalities. The chips are identical logic control components incorporating a type of smart colloid, giant electrorheological fluid (GERF), which possesses reversible characteristics via a liquid-solid phase transition under external electric field. Two pairs of electrodes embedded on the sides of two microfluidic channels serve as signal input and output, respectively. One, located in the GERF micro-channel is used to control the flow status of GERF, while another one in the ither micro-fluidic channel is used to detect the signal generated with a passing-by droplet (defined as a signal droplet). Switching of the GERF from the suspended state (off-state) to the flowing state (on-state) or vice versa in the micro-channel is controlled by the appearance of signal droplets whenever they pass through the detection electrode. The output on-off signals can be easily demonstrated, clearly matching with GERF flow status. Our results show that such a logic switch is also a logic IF gate, while its inverter functions as a NOT gate.

A Simple Approach for Local Contact Angle Determination on a Heterogeneous Surface

We report a simple approach for measuring the local contact angle of liquids on a heterogeneous surface consisting of intersected hydrophobic and hydrophilic patch arrays, specifically by employing confocal microscopy and the addition of a very low concentration of Rhodamine-B (RB) (2 × 10(-7) mol/L). Interestingly, RB at that concentration was found to be aggregated at the air-liquid and solid (hydrophobic patch only)-liquid interfaces, which helps us to distinguish the liquid and solid interfaces as well as hydrophobic and hydrophilic patches by their corresponding fluorescent intensities. From the measured local contact angles, the line tension can be easily derived and the value is found to be (-2.06-1.53) × 10(-6) J/m.

Multiple and High-Throughput Droplet Reactions via Combination of Microsampling Technique and Microfluidic Chip

Microdroplets offer unique compartments for accommodating a large number of chemical and biological reactions in tiny volume with precise control. A major concern in droplet-based microfluidics is the difficulty to address droplets individually and achieve high throughput at the same time. Here, we have combined an improved cartridge sampling technique with a microfluidic chip to perform droplet screenings and aggressive reaction with minimal (nanoliter-scale) reagent consumption. The droplet composition, distance, volume (nanoliter to subnanoliter scale), number, and sequence could be precisely and digitally programmed through the improved sampling technique, while sample evaporation and cross-contamination are effectively eliminated. Our combined device provides a simple model to utilize multiple droplets for various reactions with low reagent consumption and high throughput.

Resonant terahertz transmissions through metal hole array on silicon substrate

We have observed resonant terahertz transmission peaks in samples comprising perforated periodic hole array in a metal film, covered with a high dielectric substrate. These resonant transmissions arise from the interplay between waveguide modes in dielectric substrate and the periodic hole array in the metal film. Finite difference time domain (FDTD) simulations show good agreement with the data, in support of the proposed mechanism. Inducing additional resonant transmissions using guided modes can lead to the ease in tuning the transmission peak frequencies that are potentially useful to terahertz (THz) bio-sensing.