Mercedes G. Montalbán

Silk Fibroin Nanoparticles: Efficient Vehicles for the Natural Antioxidant Quercetin.

This article describes how silk fibroin nanoparticles (SFNs) are capable of adsorbing and releasing quercetin (Q) and how its integrity is highly preserved, as confirmed by antioxidant activity assays. Q loading onto SFNs was optimized in terms of the Q/SFN ratio (w/w), time of adsorption and solvent mixture. Quercetin-loaded silk fibroin nanoparticles (QSFNs) were characterized using the dynamic light scattering technique to measure the diameter (Z-Average) and Z-potential (ζ). Loaded particles were slightly bigger than the SFNs, while their ζ was less negative. The antioxidant activity against DPPH showed that the Q loaded in QSFNs not only retains the antioxidant activity but also has a synergistic scavenging activity due the intrinsic antioxidant activity of the SF. The drug loading content (DLC) and the encapsulation efficiency (EE) varied with the relation between Q and SFN in the loading solution. The sustained release of Q occurred throughout the experiment both in phosphate buffer saline (pH 7.4) and simulated intestinal fluid (pH 6.8). The results point to SFNs as promising candidates for Q loading, transport and gastrointestinal delivery with potential applications in nanomedicine, while retaining their nano-size and their antioxidant properties.

Aggregation behaviour of gold nanoparticles in presence of chitosan

Chitosan (CS) is a biocompatible polysaccharide with positive charge that is widely used as a coating agent for negatively charged nanoparticles. However, the types of structures that emerge by combining CS and nanoparticles as well as their behaviour are still poorly understood. In this work, we characterize the nanocomposites formed by gold nanoparticles (AuNPs) and CS and study the influence of CS in the expected aggregation process that should experience those nanoparticles under the favourable conditions of low pH and high ionic strength. Thus, at the working CS concentration, we observe the existence of CS structures that quickly trap the AuNPs and avoid the formation of nanoparticle aggregates in environmental conditions that, otherwise, would lead to such an aggregation.

Ecotoxicity assessment of dicationic versus monocationic ionic liquids as a more environmentally friendly alternative

One of the reasons why ionic liquids have received growing interest from researchers is their environmentally interesting characteristics, such as their negligible vapour pressure and their good chemical and thermal properties. In particular, dicationic ionic liquids whose thermal and electrochemical stability is higher than that of monocationic ionic liquids have begun to gain attention during recent years. In this work, monocationic and dicationic ionic liquids were synthesized, characterized and tested for their toxicity, which was assessed using the luminescent bacterium Vibrio fischeri. The results revealed that the toxicity of the ionic liquids mainly depends on the head groups and linkage chain length of their cationic structure. Introduction of a new cationic head decreased the EC50 (concentration which leads to 50% reduction in bioluminescence of the bacteria) of the ionic liquids. The results present a promising picture of dicationic ionic liquids as alternatives with lower environmental impact than their monocationic counterparts and underline the significance of designing particular structures for ionic liquids.

Production of Curcumin-Loaded Silk Fibroin Nanoparticles for Cancer Therapy

Curcumin, extracted from the rhizome of Curcuma longa, has been widely used in medicine for centuries due to its anti-inflammatory, anti-cancer, anti-oxidant and anti-microbial effects. However, its bioavailability during treatments is poor because of its low solubility in water, slow dissolution rate and rapid intestinal metabolism. For these reasons, improving the therapeutic efficiency of curcumin using nanocarriers (e.g., biopolymer nanoparticles) has been a research focus, to foster delivery of the curcumin inside cells due to their small size and large surface area. Silk fibroin from the Bombyx mori silkworm is a biopolymer characterized by its biocompatibility, biodegradability, amphiphilic chemistry, and excellent mechanical properties in various material formats. These features make silk fibroin nanoparticles useful vehicles for delivering therapeutic drugs, such as curcumin. Curcumin-loaded silk fibroin nanoparticles were synthesized using two procedures (physical adsorption and coprecipitation) more scalable than methods previously described using ionic liquids. The results showed that nanoparticle formulations were 155 to 170 nm in diameter with a zeta potential of approximately −45 mV. The curcumin-loaded silk fibroin nanoparticles obtained by both processing methods were cytotoxic to carcinogenic cells, while not decreasing viability of healthy cells. In the case of tumor cells, curcumin-loaded silk fibroin nanoparticles presented higher efficacy in cytotoxicity against neuroblastoma cells than hepatocarcinoma cells. In conclusion, curcumin-loaded silk fibroin nanoparticles constitute a biodegradable and biocompatible delivery system with the potential to treat tumors by local, long-term sustained drug delivery.

Chitosan as stabilizing agent for negatively charged nanoparticles

Chitosan is a biocompatible polysaccharide with positive Z potential which can stabilize negative charged nanoparticles. Silk fibroin nanoparticles and citrate gold nanoparticles, both with negative Z potential, but they form aggregates at physiological ionic strength. In this work, we study the behavior of chitosan in solution when the ionic strength of the medium is increased and how the concentration of chitosan and the proportion of the two components (chitosan and AuNP or SFN) significantly affect the stability and size of the nanocomposites formed. In addition to experimental measurements, molecular modeling were used to gain insight into how chitosan interacts with silk fibroin monomers, and to identify the main energetic interactions involved in the process. The optimum values for obtaining the smallest and most homogeneous stable nanocomposites were obtained and two different ways of organization through which chitosan may exert its stabilizing effect were suggested.

Density and refractive index data of binary and ternary mixtures of imidazolium-based ionic liquids, n-hexane and organic compounds involved in the kinetic resolution of rac-2-pentanol

This data article is related to the subject of the research article “Extraction of Organic Compounds Involved in the Kinetic Resolution of rac-2-Pentanol from n-Hexane by Imidazolium-based Ionic Liquids: Liquid-Liquid Equilibrium” (Montalbán et al., 2018) [1]. It contains experimental data of density and refractive index of binary and ternary mixtures of imidazolium-based ionic liquids, n-hexane and organic compounds involved in the kinetic resolution of rac-2-pentanol (rac-2-pentanol, vinyl butyrate, rac-2-pentyl butyrate or butyric acid) measured at 303.15 K and 1 atm. These data are presented as calibration curves which help to determine the composition of the ionic liquid-rich phase knowing its density or refractive index.

Synthesis and characterization data of monocationic and dicationic ionic liquids or molten salts

Data presented in this article are related with the research paper entitled “Ecotoxicity assessment of dicationic versus monocationic ionic liquids as a more environmentally friendly alternative” [1]. The present article describes the synthesis steps and characterization data of a set of twenty-six imidazolium, pyrrolidinium and pyridinium-based ionic liquids (ILs) or molten salts: nine monocationic and seventeen dicationic. Specifically, the chemical structure of the compounds was confirmed by 1H NMR, 13C NMR and 19F NMR spectroscopy and mass spectrometry (MS). Other data such as physical state at room temperature, melting point temperature (for solids at room temperature) and thermal decomposition temperature (when melting was not reached before decomposition) of the ILs or molten salts are also reported here.

Predicting Density and Refractive Index of Ionic Liquids

The determination of the physicochemical properties of ionic liquids (ILs), such as density and refractive index, is essential for the design of processes that involve ILs. Density has been widely studied in ILs because of its importance whereas refractive index has received less attention even though its determination is rapid, highly accurate and needs a small amount of sample in most techniques. Due to the large number of possible cation and anion combinations, it is not practical to use trial and error methods to find a suitable ionic liquid for a given function. It would be preferable to predict physical properties of ILs from their structure. We compile in this work different methods to predict density and refractive index of ILs from literature. Especially, we describe the method developed by the authors in a previous work for predicting density of ILs through their molecular volume. We also correlate our experimental measure‐ ments of density and refractive index of ILs in order to predict one of the parameters knowing the other one as a function of temperature. As the measurement of refractive index is very fast and needs only a drop of the ionic liquid, this is also a very useful approach.