Mercedes Medio-Simón

Gold(I)-catalyzed intermolecular oxyarylation of alkynes: unexpected regiochemistry in the alkylation of arenes.

The reaction between acetylenes and sulfoxides, studied as a test case for gold-catalyzed intermolecular addition, provides the oxyarylation compounds 3 in good yields. Unpredictably, in all cases a single regioisomer arising from the electrophilic aromatic alkylation at the position adjacent to the sulfur atom is obtained instead of the expected Friedel-Crafts regioisomer. A new concerted mechanism based on DFT calculations is proposed to account for the products in this intermolecular gold(I)-catalyzed reaction.

Competitive and Selective Csp3Br versus Csp2Br Bond Activation in Palladium‐Catalysed Suzuki Cross‐Coupling: An Experimental and Theoretical Study of the Role of Phosphine Ligands

Phosphine ligands have been demonstrated to have an effect on reactivity and selectivity in the competitive intramolecular palladium-catalysed Suzuki-Miyaura coupling of dibromo sulfoxide 1a possessing two different hybridised electrophilic carbons. It was found that the bromine bond to the sp(3)-hybridised carbon is selectively replaced in the presence of unhindered phosphines such as PPh(3) or xantphos. The use of hindered phosphine ligands such as P(o-tol)(3) and P(1-naphthyl)(3) reversed the selectivity, conducting the cross-coupling at the Csp(2)-Br. Identical trends were observed in external competition experiments carried out with bromomethyl sulfoxide and different substituted bromoarenes. DFT and DFT/MM calculations showed that the selectivity observed is mainly due to the different facility of the ligands to dissociate. Bisphosphine catalysts favour coupling at the sp(3) carbon, whereas monophosphine catalysts prefer the sp(2) carbon.

Why Is the Suzuki−Miyaura Cross-Coupling of sp3 Carbons in α-Bromo Sulfoxide Systems Fast and Stereoselective? A DFT Study on the Mechanism

The stereoselectivity-determining oxidative addition step in the Suzuki-Miyaura cross-coupling of alpha-bromo sulfoxides is analyzed computationally through DFT calculations on a model system defined by Pd(PMe(3))(2) and CH(3)SOCH(2)Br. Both monophospine and bisphosphine complexes have been considered, different reaction pathways being characterized through location of the corresponding transition states. The lowest energy transition states correspond to nucleophilic substitution mechanisms, which imply inversion of configuration at the carbon, in good agreement with experimental data on the process. The energy-lowering and stereodirecting role of the sulfinyl substituent is explained through its attractive interactions with the palladium center, which are only possible in the most favored mechanisms.

Competitive Gold‐Activation Modes in Terminal Alkynes: An Experimental and Mechanistic Study

The competition between π- and dual σ,π-gold-activation modes is revealed in the gold(I)-catalyzed heterocyclization of 1-(o-ethynylaryl)urea. A noticeable effect of various ligands in gold complexes on the choice of these activation modes is described. The cationic [Au(IPr)](+) (IPr=2,6-bis(diisopropylphenyl)imidazol-2-ylidene) complex cleanly promotes the π activation of terminal alkynes, whereas [Au(PtBu3 )](+) favors intermediate σ,π species. In this experimental and mechanistic study, which includes kinetic and cross-over experiments, several σ-gold, σ,π-gold, and other gold polynuclear reaction intermediates have been isolated and identified by NMR spectroscopy, X-ray diffraction, or MALDI spectrometry. The ligand control in the simultaneous or alternative π- and σ,π-activation modes is also supported by deuterium-labeling experiments.

NHC-stabilized gold(I) complexes: suitable catalysts for 6-exo-dig heterocyclization of 1-(o-ethynylaryl)ureas.

3-Substituted 1-(o-ethynylaryl)ureas 1 selectively undergo either 6-exo-dig or 5-endo-dig cyclization (to give 4-methylene-3,4-quinazolin-2-ones 2 or indoles 3, respectively) depending on the choice of the metal, ligand, and reaction conditions. The best results (up to 96% yield) in the preparation of the hydroamination products 2 are achieved with the highly bulky NHC-stabilized cationic gold(I) complex [Au(IPr)](+). Conversely, ureas bearing an internal alkyne lead to the 5-endo-dig cyclization mode regardless of the gold(I) complex employed. Whereas the nature of the substituent at N-3 does not have any influence on the regiochemistry observed, it does, in some cases, affect the efficiency of these transformations.

Osmium(III) Complexes with POP Pincer Ligands: Preparation from Commercially Available OsCl3·3H2O and Their X-ray Structures

Complexes OsCl(3){dbf(P(i)Pr(2))(2)} [1; dbf(P(i)Pr(2))(2) = 4,6-bis(diisopropylphosphino)dibenzofuran], OsCl(3){xant(P(i)Pr(2))(2)} [2; xant(P(i)Pr(2))(2) = 9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene], and OsCl(3){xant(PPh(2))(2)} [3; xant(PPh(2))(2) = 9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene] have been obtained in high yield by the reaction of the corresponding diphosphine with OsCl(3)·3H(2)O. The ruthenium(III) counterparts RuCl(3){dbf(P(i)Pr(2))(2)} (4), RuCl(3){xant(P(i)Pr(2))(2)} (5), and RuCl(3){xant(PPh(2))(2)} (6) are similarly obtained from RuCl(3)·3H(2)O in moderate yields. The X-ray structures of dbf(P(i)Pr(2))(2) and complexes 1-3 are also reported.

Remarkable effect of lithium bromide in the enantioselective protonation with α-sulfinyl alcohols

Abstract The favourable effect of lithium bromide enhancing the facial enantioselectivity in the protonation of methyl tetralone enolate with α-sulfinyl alcohols is described. Theoretical calculations allow to propose a model to explain the stereochemical course of the protonation reaction.

Highly Enantioselective Protonation of the 3,4-Dihydro-2- methylnaphthalen-1(2H)-one Li-Enolate by TADDOLs

A series of nine TADDOLs (=α,α,α′,α′-tetraaryl-1,3-dioxolane-4,5-dimethanols) 1a – 1i, have been tested as proton sources for the enantioselective protonation of the Li-enolate of 2-methyl-1-tetralone (=3,4-dihydro-2-methylnaphthalen-1(2H)-one). The enolate was generated directly from the ketone (with LiN(i-Pr)2 (LDA)/MeLi) or from the enol acetate (with 2 MeLi) or from the silyl enol ether (with MeLi) in CH2Cl2 or Et2O as the solvent (Scheme). The Li-enolate (associated with LiBr/LDA, or LiBr alone) was combined with 1.5 – 3.0 equiv. of the TADDOL at −78° by addition of the latter or by inverse addition. 2-Methyl-1-tetralone of (S)-configuration is formed (≤80% yield) with up to 99.5% selectivity if and only if (R,R)-TADDOLs (1d, e, g) with naphthalen-1-yl groups on the diarylmethanol unit are employed (Table). The reactions were carried out on the 0.1- to 1.0-mM scale. The selectivity is subject to non-linear effects (NLE) when an enantiomerically enriched TADDOL 1d is used (Fig. 1). The performance of TADDOLs bearing naphthalen-1-yl groups is discussed in terms of their peculiar structures (Fig. 2).

Efficient asymmetric protonation of enolates with readily accessible chiral α-sulfinyl alcohols

Abstract The efficient asymmetric protonation of lithium enolates of 2-alkylcycloalkanones (87–96% ee) with readily accessible chiral α-sulfinyl alcohols is described. Optimal stereoselection is achieved for each lithium enolate at a different reaction temperature in the range −40 to −100°C.

First synthesis of the chiral mixed O/S ligands, 1,2-sulfinyl thiols: application as chiral proton sources in enantioselective protonations of enolates

Abstract A suitable method for the preparation of the chiral mixed O/S ligands 1,2-sulfinyl thiols is described. These compounds have then been used as a chiral proton source in the enantioselective protonation of 2-methyl tetralone enolate and the results are compared with those obtained from the analogous alcohols. A theoretical model is proposed to explain the different behaviors exhibited in the protonation reaction for each of these proton sources. Configurational assignments for the new chiral thiols have been carried out by means of X-ray analysis.